1/4 npt male for sale, brand-new and used.

<img src="http://ti2.auctiva.com/web/aswCredit.gif" border="0"><br><a href="http://www.auctiva.com/?how=scLnk0" target="_blank"&am

EZ- ECONO FITTINGS STRAIGHT Hydraulic Fitting 1/4" Male JIC/ -4 AN X 1/8" Male NPT (10 QTY Fittings)

Push in one touch style pneumatic male elbow 90 degree fitting. 1/8" OD tubing with 1/4" NPT threads.. Vacuum to 150 PSI working pressure.

(Qty of 10) Push in one touch style pneumatic male branch tee connector fitting. 1/4" OD tubing with 1/4" NPT threads.. Vacuum to 150 PSI working pressure.

(Qty of 10) Push in one touch style pneumatic male swivel elbow 90 degree fitting. 3/8" OD tubing with 1/4" NPT threads.. Vacuum to 150 PSI working pressure.

Brand new pack of five male quick disconnect coupling plugs in 1/4" not. Super cheap and great for carpet cleaning

Increase traffic to your listing with Auctiva's FREE Scrolli

Control Devices ST Series Brass ASME Safety Valve, 200 psi Set Pressure, 1/4" Male NPT Product Features

Anderson Metals Brass Garden Hose Fitting, Swivel, 3/4" Female Hose ID x 1/4" Male Pipe Product Features

This is a cast bronze, one and a quarter inch male pipe threads on both ends, made to go through a 2 inch hole, with the bulkhead being roughly one quarter inch. The brass has a dark patina from laying around in a small town hardware store before it went out of business and then laid around my place another 10 years. Threaded ends are about 1 5/8th inch male threads (1 1/4 inch NPT)The center threaded section is 2 inches ODI would expect the gasket to measure 2 1/2 OD X 2 ID X 1/8th thick.

The Hose is New in Box - the box was opened for inspection, pictures, and to use some parts from the installation kit. I am selling it as described as the HG-2D-48 just the hose, however you can have some of the installation kit. The box has wearing on the outside from sitting in storage.

Control Devices NC Series Brass Non-Code Safety Valve, 25-200 psi Adjustable Pressure Range, 1/4" Male NPT Product Features

This sale is for a GJ50 Dixon Ground Joint Air Hammer Coupling Male Spud 3/4" male NPT x 1-31/64" O.D. male coarse spud thread. I also have GJ75, GJ6, GDL25, GDL10 and GDL7.