1/5 hp condenser fan motor for sale, brand-new and used.

Emerson 1860 Condenser Fan Motor Replacement motor Nordyne 917280 for Miller MSC-24,30 & 36 1/4 HP, 208-230 Volts, 1.7 Amp, 1075 RPM, Capacitor 5 MFD/370 Volt, Shaft 1/2" x 5", Rotation Reversiable, Frame 48y, Mount Stud/Band

UP FOR SALE MOTOR , HERE ARE THE SPECS : Item

Condenser Fan Motor Item #: 1859 1/6HP Totally Enclosed Condenser Fan Motor 5.6" Diameter, Totally Enclosed Air Over (TEAO) 140°F (60°C) Ambient Design Sleeve Bearings have All Angle Thrust System Class B Insulation Extended Studs 30" Leads Hubless Lead End Drain Holes Both Ends Automatic Reset Thermal Overload Protector Continuous Duty HP: 1/6 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No.

UP FOR SALE CONDENSER FAN MOTOR , HERE ARE THE SPECS : Motor Type PSC

FIRST CHOICE CONDENSER FAN MOTOR 1/3 HP - 208-230 VAC - 60 HZ 1075 RPM - 7.5/370 UP CAP FLA 2.8 - REVERSIBLE ROTATIONS - BALL SHAFT SIZE 1/2 X 5 CROSS REFERENCE: AO SMITH FSE1036S, EMERSON 1861, FASCO D908, GE 3729, WAGNER WG840729 MSDSREF: 319/2

MARS MULTI-HORSEPOWER CONDENSER FAN MOTOR 1/5, 1/4, 1/3, 1/2 HP, 208-230 VAC 2 SPEED, 1075 RPM REPLACES: AOS FE6002, EMR 5465, WAGNER WG840468, SOURCE 1 S1-FHM3468, RCD P257-E5465 AND PARTNERS CHOICE 01-0697 MSDSREF: 309/2

Description for Carrier TT-C50-1SP2 All TopTech Fractional Horsepower Mot

This is a good used Lennox, Ducane, Armstrong Condenser fan motor. Lennox part # 100483-04. cat # 97M50 This motor was tested and works perfectly.

Item Condenser Fan Motor Motor Type Permanent Split Capacitor Enclosure Open Air-Over HP

This motor came off my old AC system condenser unit. I am sorry - I should have cleaned it before taking the photos but did not. I would estimate that it is about 20 years old.

MOTOR CONDENSER 1/4 850/1 208/230-1-60 Features:• Permanent split capacitor (capacitor not included)• Direct drive, air over• Inherently protected• Class B insulation• Rotation determined viewing end opposite shaft• 1/2” dia. shaft w/single flat except where noted**• Plug type electrical connections• Extended through bolts - .3 to .4 lg. (end opposite shaft only)•

BesTech Condenser Fan Blower Motor. BT-C33-1SP2. 1/3 HP, 208-230/460 Volts, 1075 RPM, 5" Shaft.

PROTECH Condenser Motor - 1/5 hp 208-230/1/60 (1075 rpm/1 speed) 51-23055-11 Technical Data: HP: 1/5 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 3/370 (230V), 5/370 (208V) FLA at 230V (A): 1.30 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Fla

This motor looks brand new but I do not know if it is. I believe it works perfectly SOLD AS IS Product Description This is a Trane/American Standard GE Genteq Condenser Fan Motor. It's 1/1 HP, 208-230 volts, 1125 RPM.

FASCO 1/4 HP CONDENSER FAN BLOWER HVAC 208-230 VOLT 2.1 AMP MOTOR 20" BLADE NEW Up for your consideration is a used FASCO 1/4 HP, 208-230 volt, 2.1 amp, 60Hz, 1075 RPM HVAC motor with a 20" fan blade included. The motor is in excellent physical shape with a 20" square 4 bladed LAU fan attached. The blade P/N is 605587-01, the pitch is 27 CW, and the maximum RPMs is 1140.

This fan motor has never been used. I installed it into my Carrier Condenser unit and then decided to replace the whole Heat Pump system. I cut the shaft to 5" to fit in my unit.

Condenser fan motor off of a York 3.5 ton heat pump ~ comes with fan blade. Used but in excellent working condition! HP 1/4 RPM 850

CENTURY FSE1076SV1 Condenser Fan Motor, 3/4 HP, 1075 rpm, 60Hz You are purchasing a NEW fan motor. Specifications: Item Condenser Fan Motor Motor Application HVAC/R Motor Sub Application

UP FOR SALE MOTOR , HERE ARE THE SPECS : Motor Application HVAC/R Motor Sub Application Condenser Fan HP 1/2 Number of Speeds 1 Nameplate RPM 1075 Frame 48YZ Voltage 208-230 Hz 60 Phase 1

GE condenser fan electric motor 1/4 HP 208-230V 1075 RPM new Brand new condenser Fan motor by General Electric in original box. Model 5KCP39FGM599AS Volts - 208-230, ph 1. HP - 1/4 AMPS - 1.80 Thermaly protected.