1/8 grain for sale, brand-new and used.

Three SOLID MICROGRAIN CARBIDE bits for fast, smooth cuts and an edge that stays sharp longer. Spiral Bits produce a very clean and accurate cut with minimal chatter. Upcut spiral helps remove material from the groove.

For sale are 10 #63 (.0370”) new PCB carbide drill bits manufactured by Kyocera Tycom. Each drill has a printed collet locating ring for easy depth control and identification. Here's a good deal on some quality carbide drills.

Features1. Coating witn TIALN Can Cutting Harden materiel, 3 times Durable than Carbide.

var itemNumber = window.ebayItemID ?

Made in U.S.A. 17/64" (.2656") Diameter, AlTiN Coated, 135° Notched Point, Solid Carbide Screw Machine (Stub) Length Drill Melin USA EDP# 57152

Made in U.S.A. #34 (.1110") Diameter Solid Carbide Straight Flute Drill for Drilling High Hardness Materials HrC 40 (40 Rockwell) and Higher. Use in Steels, Hardened Steels, Cast Iron, High-Silicon Aluminum and Superalloys.

Sale For sale are fifty (50) 0.20mm (.0079") new micro carbide drill bits manufactured by Kyocera Tycom.

MADE IN USA For sale are (50) 0.40mm (.0157”) new PCB carbide drill bits manufactured by Kyocera Tycom. Here's a good deal on some quality carbide drills.

For sale are ten (10) #45 (.0820") new PCB carbide drill bits manufactured by Kyocera Tycom. These tools are designed for drilling holes in G10 and plastic. Each drill has a printed collet locating ring for easy depth control and identification.

For sale is a box of (50) resharpened PCB carbide drill bits manufactured by Kyocera Tycom. These drills have been resharpened by the original manufacturer to their quality requirements. These drills have a printed collet locating ring easy depth control and identification.

For sale are ten (10) #69 (.0292") new PCB carbide drill bits manufactured by Kyocera Tycom. These tools are designed for drilling holes in G10 and plastic. They can also be used for drill aluminum and steel under fluid.

For sale is a box of (50) #57 (.0430") new PCB carbide drill bits manufactured by Kyocera Tycom. These drills have a printed collet locating ring easy depth control and identification. Here's a good deal on some quality carbide drills.

For sale are fifty 0.65mm (.0256”) new PCB carbide drill bits manufactured by Kyocera Tycom. These tools can be used to drill plastic, aluminum, or some steels when used with a fluid lubricant.

TypeGeneral Purpose FinishTiAlN GradeC2 Micro Grain Diameter5/8" Shank Dia.5/8" EndSingle End Number of Flutes4 Overall Length3-1/2" ItemCarbide End Mill Cutting DirectionRight Hand Length of Cut1-1/4" Corner Radius.090" Helix Angle30 Degrees Cutting TypeCenter

TypeGeneral Purpose FinishTiAlN GradeC2 Micro Grain Diameter5/8" Shank Dia.5/8" EndSingle End Number of Flutes4 Overall Length3-1/2" ItemCarbide End Mill Cutting DirectionRight Hand Length of Cut1-1/4" Corner Radius.060" Cutting TypeCenter End StyleCorner Radius

Brand New Quantity of 1 GARR

1/32" (.0312") Diameter 4 Flute Single End XXLong Flute Solid Carbide End MillALTiN Coated .375" Length of Cut, 1-1/2" Overall Length, 1/8" Shank Kyocera Micro Tools USA #1810-031

These are solid micro grain carbide endmills. They have a 7/32" diameter with a 5/8" length of cut and a 1/4" x 2 1/2" overall length. Three flutes are the most overlooked item on the shelf.