1/8 in screw for sale, brand-new and used.

THIS IS A USED MILWAUKEE SHARP FIRE SCREW SHOOTER SYSYTEM. THIS IS IN EXCELLENT CONDITION, VERY LIGHT USE. YIOU ARE GETTING THE WHOLE KIT AND THAT INCLUDEDS-- MAGAZINE, EXTENSION KIT AND CARRYING CASE POWER UNIT IS-- 6.5 AMPS- VARIABLE SPED CONTROL- LIGHTWEIGHT DESIGN-- QUEIT SNAP-ACTION CLUTCH-- ALL METAL GEAR CASE AND DIAPHRAM-- NEW SWITCH WITH TWO FINGER TRIIGGER-- Collated screw fastening system for 1-1/4 in.

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

Offering a cross feed screw and nut for a 14" Logan lathe My research indicates that this fits a 14" Logan, but compare dimensions to confirm this is correct for your application Screw is in very good condition with the threads just as thick in the middle as they are at the end Thread size is 5/8" x 10 The screw is 17-5/8" long overall Acme threads are just over 10" long The gear has 18 teeth

Kreg K4MS Jig Master System with SK03 675 Screws Pocket Hole Screw Joinery Kit

101-1004-009 Manufactured by EATON CORPORATION CHAR LYNNHYDRAULIC MOTOR 353RPM 1650PSI 1/2IN PIPE PORTS Standard Seals, Painted Low Glos

???? 1 Digital torque meter screw driver wrench t

12V Cordless Electric Drill - Flash

DM-MOTIN

DM-MOTIN

var loadingImages = new Array();function autoSizeImage(src, tagName, maxSize) {if (document.images){if (loadingImages[src.toString().toLowerCase()] == null) {loadingImages[src.toString().toLowerCase()] = new Image(); loadingImages[src.toString().toLowerCase()].src = src;} if((loadingImages[src.toString().toLowerCase()].width maxSize)){if (aspectRatio > 1.0) {aspectRatio = (1.0 * image.height) / image.width;width = maxSize; height = Math.round(aspectRatio * maxSize);} else{he

Nucor 1 3/4-5x8 Grade 5 Hex Bolt - USA UNC Plain Finish, Pk 8 Item Description: Hex Bolt - USA Size: 1 3/4-5x8 Thread Type: UNC (Coarse Thread) Grade:

Nucor 3/8-16x3 1/2 Grade 8 Hex Bolt / Cap Screw - USA UNC Plain Finish, Pk 300 Item Description: Hex Bolt / Cap Screw - USA Size: 3/8-16x3 1/2 Thread Type: UNC (Coarse Thread)

AVAILABLE FOR SALE SCREW PLUG HEATER , HERE ARE THE SPECS : Watts 5000 Sheath Materia Steel Watt Density 23 sq. in. Voltage 240 Phase 1 Overall Length 47-1/2" Control Range 100 Degrees to 550 Degrees F NPT 2" Enclosure Type

Dwyer 102-AV MANOMETER, INCLINED 20-0 - 2.0 Very good condition. As shown in pictures. Does not include other kit components Designed to measure air velocity, static pressure, vacuum or differential pressure, wherethe additional range of the 400 Series gages is not required.