+ Post new Ad
10 BT40 PULL STUD RETENTION KNOB 60 DEGREE FOR MATSURA OKUMA & OTHERS LOTC13775, US $110 – Picture 0
10 BT40 PULL STUD RETENTION KNOB 60 DEGREE FOR MATSURA OKUMA & OTHERS LOTC13775, US $110 – Picture 0

10 Bt40 Pull Stud Retention Knob 60 Degree For Matsura Okuma & Others Lotc13775

US $110

  • Dayton, Ohio, United States
  • May 29th
Open on mobile:
QR code
SquareTrade © AP6.0 LOT C13775 ANY QUESTIONS CALL 937-672-9876 WE ARE OFFERING A ""NO COOLANT THRU""  BT40 60 DEGREE PULL STUD RETENTION KNOB FOR MATSURA OKUMA & OTHERS NO COOLANT THRU. ALSO HAVE OTHER   PULL STUDS AVAILAABLE TO LIST. SOME MAY BE NEW SOME USED WE CURRENTLY HAVE MORE PULL STUDS, CAT50, AND CAT40 ALSO HAVE HAAS  AND OTHER STYLES.  PLEASE CLICK THE LINK BELOW:  TO SEE ALL OF OUR ITEMS    PLEASE CLICK THE LINK BELOW: Visit My eBay Store! AS WITH ALL TOOLING YOU SHOULD MAKE SURE THESE MEET YOUR MACHINES & COMPANY  QUALITY STANDARDS BEFORE USING. PLEASE SEE PICTURES. YOU WILL RECEIVE ITEMS AS SHOWN IN PICTURES. PLEASE USE PICTURE WITH DIM. AS REF.  ""NO COOLANT THRU""  WE HAVE MORE PULL STUDS  LISTED AS ALWAYS WE WILL COMBINE SHIPPING CHARGES PLEASE TAKE A LOOK AT OUR OTHER ITEMS WE HAVE LISTED.           Check out my other items! IF YOU HAVE ANY QUESTIONS EMAIL OR CALL US AT 937-672-9876.             Be sure to add me to your favorites list!

Directions

Similar products from BT Tool Holders

PARLEC BT40 1/4" END MILL HOLDER 2" PROJECTION STK9442

PARLEC BT40 1/4" END MILL HOLDER 2" PROJECTION STK9442

  • Wadley, Alabama, United States
  • May 29th
PARLEC BT40 ER32 COLLET CHUCK 6" PROJECTION STK9443

PARLEC BT40 ER32 COLLET CHUCK 6" PROJECTION STK9443

  • Wadley, Alabama, United States
  • May 29th
BT 40 TOOL HOLDER .375 I.D. TECHNARA

BT 40 TOOL HOLDER .375 I.D. TECHNARA

  • Rockaway, New Jersey, United States
  • May 29th
BT40 3/4" END MILL HOLDER 3-1/4" PROJECTION STK 6824

BT40 3/4" END MILL HOLDER 3-1/4" PROJECTION STK 6824

  • Wadley, Alabama, United States
  • May 29th
VALENITE BT40 1/2" END MILL HOLDER 1-3/4" PROJECTION STK 6825

VALENITE BT40 1/2" END MILL HOLDER 1-3/4" PROJECTION STK 6825

  • Wadley, Alabama, United States
  • May 29th
CARBOLOY BT40 3/4" END MILL HOLDER 3" PROJECTION STK 6823

CARBOLOY BT40 3/4" END MILL HOLDER 3" PROJECTION STK 6823

  • Wadley, Alabama, United States
  • May 29th
KENNAMETAL BT40 1/2" END MILL HOLDER 2-1/2" PROJECTION STK 6827

KENNAMETAL BT40 1/2" END MILL HOLDER 2-1/2" PROJECTION STK 6827

  • Wadley, Alabama, United States
  • May 29th
KENNAMETAL BT40 1/2" END MILL HOLDER 2-1/2" PROJECTION STK 6828

KENNAMETAL BT40 1/2" END MILL HOLDER 2-1/2" PROJECTION STK 6828

  • Wadley, Alabama, United States
  • May 29th
CARBOLOY BT40 1/2" END MILL HOLDER 2.56 PROJECTION STK 6830

CARBOLOY BT40 1/2" END MILL HOLDER 2.56 PROJECTION STK 6830

  • Wadley, Alabama, United States
  • May 29th
BT40 1" END MILL HOLDER 4" PROJECTION STK 6821

BT40 1" END MILL HOLDER 4" PROJECTION STK 6821

  • Wadley, Alabama, United States
  • May 29th
Lathe Diagonal Knurl Tool, Shank is 1/2" Wide x 15/16" High, 6-1/2" Long

Lathe Diagonal Knurl Tool, Shank is 1/2" Wide x 15/16" High, 6-1/2" Long

  • Saunderstown, Rhode Island, United States
  • May 29th
GS BT 40 1/4" Integral Shank High Precision Keyless CNC Drill Chuck

GS BT 40 1/4" Integral Shank High Precision Keyless CNC Drill Chuck

  • Hamden, Connecticut, United States
  • May 29th
GS NMTB 40 1/2" Integral Shank High Precision Keyless CNC Drill Chuck

GS NMTB 40 1/2" Integral Shank High Precision Keyless CNC Drill Chuck

  • Hamden, Connecticut, United States
  • May 29th
GS 3/4" Straight Integral Shank 1/4" High Precision Keyless CNC Drill Chuck

GS 3/4" Straight Integral Shank 1/4" High Precision Keyless CNC Drill Chuck

  • Hamden, Connecticut, United States
  • May 29th
GS 1-1/4" Straight Shank 1/2" High Precision Integral Keyless CNC Drill Chuck

GS 1-1/4" Straight Shank 1/2" High Precision Integral Keyless CNC Drill Chuck

  • Hamden, Connecticut, United States
  • May 29th
ZLIVECENTER BT30 ER32 MILLING COLLET CHUCK HOLDER PROJ. 3.94" BALANCE 25,000RPM

ZLIVECENTER BT30 ER32 MILLING COLLET CHUCK HOLDER PROJ. 3.94" BALANCE 25,000RPM

  • Diamond Bar, California, United States
  • May 29th
ZLIVECENTER BT50 ER25 MILLING COLLET CHUCK HOLDER PROJ. 5.91" BAL 12,000RPM

ZLIVECENTER BT50 ER25 MILLING COLLET CHUCK HOLDER PROJ. 5.91" BAL 12,000RPM

  • Diamond Bar, California, United States
  • May 29th
Armstrong No.T- 2-L Lathe Bit Tool-Holder Machinist

Armstrong No.T- 2-L Lathe Bit Tool-Holder Machinist

  • McKeesport, Pennsylvania, United States
  • May 29th
KENNAMETAL BT40 1/2" END MILL HOLDER 2-1/2" PROJECTION STK 6826

KENNAMETAL BT40 1/2" END MILL HOLDER 2-1/2" PROJECTION STK 6826

  • Wadley, Alabama, United States
  • May 28th
KENNAMETAL BT40 TG100 COLLET CHUCK 3" PROJECTION STK 6841

KENNAMETAL BT40 TG100 COLLET CHUCK 3" PROJECTION STK 6841

  • Wadley, Alabama, United States
  • May 28th

People who viewed this item also vieved

milwaukee 49 56 7_16 arbor

milwaukee 49 56 7_16 arbor

  • McDonough, Georgia, United States
  • Jan 30th
KBC 1-1/4" MILLING MACHINE ARBOR, R-8

KBC 1-1/4" MILLING MACHINE ARBOR, R-8

  • Bremen, Indiana, United States
  • Jan 30th
KENNAMETAL Indexable Screw Down Boring Bar A0610STUNL2 1094736 USA <139>

KENNAMETAL Indexable Screw Down Boring Bar A0610STUNL2 1094736 USA <139>

  • Saint Louis, Missouri, United States
  • Jan 30th
KENNAMETAL/ROMICRON SVU65 FINISH BORING HEAD W/CAT50 KR50SVU65110M

KENNAMETAL/ROMICRON SVU65 FINISH BORING HEAD W/CAT50 KR50SVU65110M

  • Wadley, Alabama, United States
  • Jan 30th
DMB TOOL CO BUSHING 4 000058168 OAL 3&#034; LOT (QTY 4) (LOC1235B) TS12

DMB TOOL CO BUSHING 4 000058168 OAL 3" LOT (QTY 4) (LOC1235B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
DMB TOOL CO BUSHING (QTY 2) 4000058223 1&#034; OAL (LOC1236A) TS12

DMB TOOL CO BUSHING (QTY 2) 4000058223 1" OAL (LOC1236A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
HPI Pioneer BT30 1/8 0.1250&#034; End Mill Holder 2.36&#034; Coolant Thru **NEW**

HPI Pioneer BT30 1/8 0.1250" End Mill Holder 2.36" Coolant Thru **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC

LYNDEX NIKKEN Milling Angle head Cat 40 taper MIMATIC

  • Chatsworth, California, United States
  • Jan 30th
Jacobs Chuck 1B, 0-.25&#034; Capacity, 3/8-24 TPI Shank, and K1 Chuck Key

Jacobs Chuck 1B, 0-.25" Capacity, 3/8-24 TPI Shank, and K1 Chuck Key

  • Rochester, New York, United States
  • Jan 30th
MACHINIST TOOLS JACOBS DCIG6 MULTICRAFT CHUCKS (2); 0-1/4&#034;, 0-6.5mm, 3/8-24 TH

MACHINIST TOOLS JACOBS DCIG6 MULTICRAFT CHUCKS (2); 0-1/4", 0-6.5mm, 3/8-24 TH

  • Lincoln University, Pennsylvania, United States
  • Jan 30th
KENNAMETAL S12-NELL05 INDEXABLE THREADING TOOL 3/4&#034; SHANK +TOP NOTCH INSERTS

KENNAMETAL S12-NELL05 INDEXABLE THREADING TOOL 3/4" SHANK +TOP NOTCH INSERTS

  • Ellington, New York, United States
  • Jan 30th
VALENITE SSRCR-20-4 D 6T5 INDEXABLE TOOLHOLDER

VALENITE SSRCR-20-4 D 6T5 INDEXABLE TOOLHOLDER

  • Dearborn, Michigan, United States
  • Jan 30th
G&amp;L Davis Boring Facing Milling Tool G8 DC-6 6.69 Face 2.22 Face

G&L Davis Boring Facing Milling Tool G8 DC-6 6.69 Face 2.22 Face

  • Salem, Virginia, United States
  • Jan 30th
Mazak CNC Sleeve OD=45/40 Length = 129 Part #24320206900

Mazak CNC Sleeve OD=45/40 Length = 129 Part #24320206900

  • Lexington, Nebraska, United States
  • Jan 30th
DA-7 Aloris Universal Parting Blade Holder

DA-7 Aloris Universal Parting Blade Holder

  • Houston, Texas, United States
  • Feb 15th
CXA-54 Aloris Morse Taper Holder

CXA-54 Aloris Morse Taper Holder

  • Houston, Texas, United States
  • Feb 15th
BRIDGEPORT 30 ERICKSON TAPER SPINDLE BOSS CNC

BRIDGEPORT 30 ERICKSON TAPER SPINDLE BOSS CNC

  • Galvin, Washington, United States
  • Apr 24th
Tapmatic 90X

Tapmatic 90X

  • Wheelersburg, Ohio, United States
  • Apr 24th
Sunnen Hone Mandrel K20 619AB 4L Bronze

Sunnen Hone Mandrel K20 619AB 4L Bronze

  • Scottsdale, Arizona, United States
  • Apr 29th
SUNNEN External Hone Stone Range FC26 and FC38

SUNNEN External Hone Stone Range FC26 and FC38

  • Fountain Hills, Arizona, United States
  • Apr 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies