10 cfm air compressor for sale, brand-new and used.

Allegro 9865 appears to be new surplus, with scratches and fading as shown in pictures. Electric cord does not appear to have been unwound. Plugs in and compressor pumps up and cycles, alarm horn functions.

Used in dive store for scuba fills and paintball, capable of filling tanks to 4500 psi. Excellent condition. Eagle Air Compressor 10 HP Motor 14 CFM Compressor 6 - 6000 psi storage bottles configured into 4 banks 4 bank fill panel TRI mix blending block with digitalPSI gauge Each of the 3 lines (air, 02, and He) into the blending block has one-way check valves, needle valves and flow valves.

I am selling my air compressor. It is a 120 Gallon vertical Air compressor. It has a 7.5 HP Single Phase motor, but also comes with a 10 HP Three Phase motor if needed.

New never used. In an open retail box. Ships in original box padding/extra tape might be added 2.0 HP with Big Bore Engineered Pump The MAC700 is powered by a 2.0 HP motor.

WE ARE COMPRESSED AIR EXPERTS Call with any questions - FACTORY DIRECT - 508-230-7118 Ingersoll Rand Rotary Screw Air Compressor - 10 HP VFD w/ Tank - Wired for 208V 7 years young, low hours. Needs New VFD Drive (Unit does not run w/ this drive)

New never used. In an open retail box. Ships in original box padding/extra tape might be added 2.0 HP with Big Bore Engineered Pump The MAC700 is powered by a 2.0 HP motor.

Powered by a Honda Industrial 9 HP OHV Engine The heavy-duty AIRE-SWEEP C17-185GH Portable Air Compressor is powered by a 9 HP, industrial-grade Honda OHV gas engine. The unit produces an outstanding airflow rate of 17.5 cfm at a rated pressure of 185 psi. ?9 HP, industrial-grade Honda OHV gas engine ?

[ Porter Cable FN250C 120 psi 100 cap 16 ga Straight Air Finish Nailer

Wholesale Direct Auto Parts

This is a new unused mrd-9 rock drill. here are the specs. shows some scratches but it is new.

Jaguar Gravity Feed Spray Gun The Jaguar J100H is a much lower cfm gun if you have a smaller compressor. Features the same great atomization as the JSLP, but with less compressor. Only 6-8 cfm required, which is in the range of most smaller shop compressors.

New-Old Stock (Never Been Used) ***Does not include box like in picture*** Has minor paint chipping on the top base (where it screws on to the can) W.R. Brown Sandblast Gun Model 352-A The Model #352 Sandblast Gun with 5/64" Air Jet and 7/64" Hardened Steel Nozzle is designed for use with portable or tank-type air compressors, 1/3 H.P. or larger, delivering a minimum of 2.2 CFM at 40 P.S.IG.

This 1/2 in. air wrench is useful for just about any automotive project—removing and replacing automotive fasteners, replacing struts on a car, tightening down a spring compressor or popping mower blades loose. The air wrench features a four-vane reversible motor that uses long lasting planetary gear reduction with a maximum torque of 45 ft.