Mitutoyo BE1-35A Gage Block Set IN CAL 6/30/16 The Mitutoyo BE1-35A is a gage block set. It ranges in size from .100 to 4.00. The only blocks that are missing are the two .100 wear blocks.
43 Piece CAT 40 Tooling Package - All Collet Chucks Techniks Packaged for the user who primarily uses collet chucks and doesn't need end mill holders ER Collet Chucks balanced to 25,000 rpm, at G2.5 2.76" Projection T.I.R. 0.0002"
DoAll Grade 1 Rectangular Steel Gage Block Set Primary Standard FN54 This set was the primary standard gage block set for Con Edison ESI Calibration/Metrology lab. This set had been decommissioned when they closed the calibration lab and has not been used. Include certification of calibration from 2013 - 2015 Please email if you have any questions or would like to speak with someone in person.
DoAll Grade 1 Rectangular Steel Gage Block Set Primary Standard FN53 This set was the primary standard gage block set for Con Edison ESI Calibration/Metrology lab. This set had been decommissioned when they closed the calibration lab and has not been used. Include certification of calibration from 2013 - 2015 Please email if you have any questions or would like to speak with someone in person.
5/16"-18 UNC-2B GO/NO GO Taperlock Work Plug Gage with Handle (New Surplus)STD Pitch Diameters: 0.2764"/0.2817"Gage is *NEW* (Dip Sealed with Long Form Certification Included)
1/4" CAT40 2.5" BALANCED END MILL HOLDER - GS Features Traverse ground shank to obtain optimum accuracy. Meets or exceeds ANSI specifications. .0002" TIR or better ensures the best possible cutting tool life.
Starrett 1019M-25 Caliper Gauge, Pointed Jaw, Yellow Face, 10-35mm Range, +/-2mm Accuracy, 0.025mm Resolutions These indicating gages are ideal for obtaining fast, comparative I.D. measurements, especially in hard-to-reach locations. The user depresses the button on the indicator housing and releases, allowing the arms to make contact with the work.
Micro flote reference tool by Muskegon with Starrett dial gage. Case is worn a little but tools look to be in great, even unused condition. May be a salesman sample.
HDL Gage Blocks: These gage blocks are all individually marked. Blocks appear to be in good condition, however there is no certification sticker on the box. One snap clip is broken (see photo).
This is a set of HDT Grade B Inspection Gage Blocks. Complete Set: 81 Pieces HDT Carbide (10) blocks incremented in (.0001") tenths: .1000, .1001, .1002, .1003, .1004, .1005, .1006, .1007, .1008, .1009 (1) Block : .050" (50 Blocks from .101" through .150"
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
