10 Kilometers Deep Light With Fc Protective Cap 10 Mw Red Pen Fiberoptic Testing

US $52.80

HONGKONG, Hong Kong
Jan 30th

Open on mobile:
QR code

The red pen is Network cabling engineering the most used red pen, large power, strong signal, the light foot.Common interface FC, SC, ST only regret is not applicable, is 1.5 LC interface need to transform the line or the < conversion head to test.There are many businesses are deliberately put 5 km, 5 mW as transmission actually mW is the unit of optical power.Our red pen baby, the baby title with optical transmission mileage (reference) and light power (mW).Not to say that much power can transmit far distance.Like a 5 mw is 5 kilometers, actually can be transmitted to a 5-8 km.Can be transferred to the < < 10 mw 10-12 km. Technical indicators: Wavelength light source: 650 + 10 nm for optical fiber: SM, MM single mode output power: 10 mW power: 2 section 5, battery power continuous working time: 20 h work or higher temperature: 10 to 60 °C (condensation) storage temperature: - 40-85 °C shell material: aluminum alloy exterior size: 24 * 170 MM (excluding interface) weight: 160 g (without battery) Method of use: 1, unscrew the tail from the pen, the pen will have prepared two batteries into 5 pen tail, battery positive electrode to the pen at the bottom of the tail (note!)Negative, negative on the pen body; 2, put the pen and pencil body connection installed, open the dust cap, according to the control switch time, observe the interface has a red light, luminous tube on at the same time;(note the eyes don't are optical interface, so as not to damage the eyes). 3, according to the control switch again, observe the light into a pulse type, indicating light tube and out of sync pulse light;(pulse frequency in the 0.5-2 hz) 4, again according to the switch, light source closed, light output, at the same time indicator light pipe out;(switch mode to: continuous - pulse - closed - continuous cycle mode) 5, when detecting insert tested optical fiber optical interface, according to the control switch at the same time, choose the output light work mode (continuous or pulse); 6, after use, build the dust cap, do not use for a long time, please take out the battery, in order to avoid battery rot, damage the light source. Maintenance and matters needing attention: 1, laser and harmful, especially to protect the eyes, the laser is working, avoid direct laser eyes; 2, the general situation, the higher the temperature, the shorter the life of laser, when used to avoid high temperature working environment; 3, the work of laser optical fiber head clean; 4, do not use the light source, the dust cap, please avoid dust fall; 5, should remove the battery when not in use; Package included: 1 x Visual Fault Locator 1 x Packing box PAYMENT:We accept payment to us through Paypal only. We also anticipate payment to be made by buyers in 3 days’ time after the auction terminates. On the other hand, non-paying winners fail to send payment to us after 14 days of bidding will receive a negative feedback from us. SHIPPING:Your item will be shipped in 2 working days after your payment is cleared. We cannot ship on weekends and we do not offer Saturday, Sunday or holiday delivery. The shipping time is 18-22 working days. Sometimes takes a little longer. If you are not happy with the received item, please contact us before leaving any feedback. We will try our best to assist you. (All emails will be responded within 24-48 hours, check with your email server or spam filter if you did not receive a reply from us) CONTACT US:You are welcomed to contact us in eBay message. We aim to deal with all eBay e-mails on a 48 hours turn around Monday to Friday (exclude holidays). (Negative Feedback can't solve any problem). Feedback: After receiving your items and are happy with your transaction; please leave a positive feedback as we will do the same for you. If you did not like your transaction, please let us know where so that we can provide you with a better shopping experience next time.