10/5 mc cable for sale, brand-new and used.

GREENLEE FLEX SPLITTER #1940 FLEXIBLE CONDUIT CUTTEROverall good used/usable condition, see pictures, the one you see is the one you'll receive Flex Splitter® Flexible Metal Conduit Cutter, Capacity: 14/2 - 10/4 BX 3/8 *** Discontinued*** "FR

Lot of (10) Semi-Flexible Coaxial Cable Assy. w/ RA MCX/F to MCX/F

Semi-flexible Coaxial Cable Assy. w/ Female MCX to Open

rfsupplier-ebay Contact us

rfsupplier-ebay

rfsupplier-ebay

rfsupplier-ebay

Wire dispenser, wire reeler, wire spinner, wire caddy, wire despooler, stud reel, cable reeler, cable spinner, cable reeler, cable caddy, romex caddy, romex dispenser, romex spinner, romex reeler, romex unroller..... No matter what you call it, the Wire Wheel® is the superior dispenser for NM, AC & MC Since you can carry the dispenser and the cable in one hand you save at least 1 trip to the truck everytime it's used.

var flashVersion = window.flashVersion ? window.flashVersion : 0;if (flashVersion

var itemNumber = window.ebayItemID ?

Greenlee 0952-01 Cable CutterSpecs Application : Use With AC And MC Cable Up To 1.000 IN Dimensions : 10.630 IN X 6.130 IN X 2.500 IN (270.000 MM X 156.000 MM X 64.000 MM)

Ebay Template CUSTOMER SERVIC

Description Microchip's PICkit3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. The MPLAB PICkit3 allows debugging and programming of PIC? and dsPIC?

A STM8 Programmer is especially for volume production.

CC-DEBUGGER Debugger and Programmer for RF System-on-Chips

Devices Supported Device support is dependent on the device file version installed with the PICkit 2 device programmer. For the versions listed above device support is listed below. When selecting a part using the "P" option (section 9), use the full name from the list below.

Item description: Frequency: 13.56 MHz Protocol: ISO14443 Type A Card Support: for Mifare S50 & S70 / Ultralight / Ultralight C / for Mifare ProX Operating Distance: up to 10 cm (depends on the IC card / tag ) Read / Write Speed: 212 Kbps Interface: USB (cable length: 1.5 meter) Baud Rate: 115200 bps OS Support: Win NT, Win 2000, Win XP, Vista, Win 7, Win 8, Linux Power: DC 5V (USB port) Current: 42mA(operating); 22mA(close port); 60mA (Max.) Indicator: LED + Buzzer (software controllable)

Descriptions Model: SS301N Used unit, good condition, pulled from a system, cable cut, no retest, sell as is. Please look over in the 2 photos for more detail. ORIENTAL MOTOR SS301N SPEED CONTROLLER Local pick up free Used Unit.