100 cst for sale, brand-new and used.

OSG TAP & DIE Product Number: 01591TP Tap Size: M11 11mm Tap Style: PLUG Thread Limit:

OSG TAP AND DIE, INC. M10 X 1 H6 3 FLUTE SPIRAL POINT PLUG TAP V-CPM-POT POT: SPIRAL POINTED FOR THRU HOLES CPM: (COBALT POWDERED METAL) SUPERIOR TO HIGH SPEED STEEL V: MULTI-LAYER TINCOATING - OVERALL LENGTH: 74mm - THREAD LENGTH: 26mm -SHANK DIAMETER: 6mm -SQ. SIZE: 4mm APPLICATION: FOR SOFT TO HARD MATERIALS.

Vintage Stanley 16 Gauge Capacity Unishear - electric shear for cutting sheet metal. Weighs in at a little over 10 pounds, measures about 12 1/2" L x 4 1/2" W x 12 1/2" T. 1800 RPM load, 2.8 Amps, 110 Volts.

Selling a pair of (2) 5'' Die Shoe Clamps. Item is used. The item does have a few dings and scratches but fully functional.

Set of knurling tool wheels, model C-11.There is a W brand marking at the top of each wheel. Outer diameter of 3/4" and inner diameter of 1/4". Wheels are 3/8" thick.

Set of two unmarked knurling tool wheels. Outer diameter of 3/4" and inner diameter of 1/4". Wheels are 3/8" thick.

Used lathe lantern style tool holder. 6 3/4" tall. Opening is 3/4" wide and the bottom base is 2 1/8" x 2 3/8".

Used tailstock turret lathe multi-head tool holder. 2 Morse taper inside, 3 Morse taper outside. Has the marking RRK-66.1.

Set of Armstrong knurling tool wheels. Model 8227, marked L and R and High Speed. Outer diameter of 5/8" and inner diameter of 1/4".

LISTING IS FOR A NEW SET OF DIAL CALIPERS

Pair of Precision Machinist Blocks. 8X3X3/4" and 8X3X1/2" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in!

Lot of three height scribers/scribes for height gauge. Measurements are as follows: Top: 7" L x 1 3/16" T x 3/8" Th, bar end measures 3/8" Th x 3/8" T.Middle: 2 3/8" L x 1 3/16" T x 1/4" Th, bar end measures 3/8" Th x 1/2" T.Bottom: 2 5/16" L x 1 3/16" T x 1/4" Th, bar end measures 1/4" Th x 1/2" T. Conditions are as pictured, good but not pristine, please examine pictures closely.

Indicator Stand/Base with Magnet. No brand name.Magnet switch is stuck. Stands 9 Inches TallThe Bar is 7 Inches.

Item is an Enco Indicator Stand/Base with working magnet and gage.Stands 9 1/2 Inches High.Bar is 7 Inches.Gage is Federal C81Q, 001 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 10

Precision Machinist Block Bender Die with Dovetail. HR12 1 3/4"tall 1 1/4"wide dovetail is1/2" Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in!

For Sale: 2 items sold as a group a 6 1/8" machinist straight edge block and a 7" electrical wire attachment runner board with 15 different attachment locations. Both of these are in great condition and will serve their purpose well Feel free to contact us by phone or email with any questions or concerns. Don't

This is new old stock. It has been sitting on my shelf too long. The box is missing and it has some surface rust.

1,2,3,4MT TO 5 MT EXTENSION SOCKET SET (LOT OF 4) (5) being shank size 1-5 2-5 3-5 4-5 SOLD AS IS/WHERE IS - Pictures show actual items for sale, everything we sell is in our warehouse - - Feedback is highly appreciated. RED ROCK ENTERPRISES (R2E) TERMS AND CONDITIONS