101 Techniks Cat 40 Tooling Kit For Haas,fadal Cnc Mill-er Collet,chuck,stud

US $3,475.00

Hamden, Connecticut, United States
Jan 30th

Open on mobile:
QR code

101 Pcs. Techniks Brand New CAT 40 25,000 RPM Balanced CNC Tooling Package for CNC Mill (Various Make & Models), Includes 11 Pcs. of ER 32 Collet Chucks, 7 Pcs. of ER 16 Collet Chucks, 1 Sets of ER 16 x 10 Pcs. 3/32" to 3/8" x 32nds , 2 Sets of ER 32 18 Pcs. 7/32" to 3/4" x 32nds Collet Sets, 1 Pc. of 1/4", 3/8", 1/2", 5/8" , 3/4", 1" Standard Length End Mill Holder, 25 Pcs.CAT 40 Pull Studs (45, 60 or 90 Degree), 1 Pc. of 1/2" SPU Drill Chuck, 2 Pcs. of ER 16 & ER 32 Wrenches & 1 Pc. of Top/Side Mount Tightening Fixture. Enjoy Huge Saving On Techniks Certified Tooling!!!! Kit Includes: 4 Pcs. Techniks Brand New CAT 40 ER 16 x 2.76" 25,000 RPM Balanced Collet Chucks w/Hex Nut, Part# 22225 3 Pcs. Techniks Brand New CAT 40 ER 16 x 4.00" 25,000 RPM Balanced Collet Chucks w/Hex Nut, Part# 22227 1 Set of Techniks Brand New ER 16 3/32" to 3/8" x 32nds .0002" T.I.R Collet Set, Part# 04209IS 2 Pcs. Techniks Brand New ER16-A Hex Collet Chuck Wrenches, Part# 04609 8 Pcs. Techniks Brand New CAT 40 ER 32 x 2.76" 25,000 RPM Balanced Collet Chucks, Part# 22253 3 Pcs. Techniks Brand New CAT 40 ER 32 x 4.00" 25,000 RPM Balanced Collet Chucks, Part# 22255 2 Sets of Techniks Brand New ER 32 7/32" to 3/4" x 32nds .0002" T.I.R Collet Sets, Part# 04212IS 2 Pcs. Techniks Brand New ER32-E Spanner Collet Chuck Wrenches, Part# 04616 1 Pc. Techniks Brand New CAT 40 1/4" x 3.00" 10,000 RPM Balanced End Mill Holder, Part# 22911 1 Pc. Techniks Brand New CAT 40 3/8" x 3.00" 10,000 RPM Balanced End Mill Holder, Part# 22915 1 Pc. Techniks Brand New CAT 40 1/2" x 3.00" 10,000 RPM Balanced End Mill Holder, Part# 22917 1 Pc. Techniks Brand New CAT 40 5/8" x 3.00" 10,000 RPM Balanced End Mill Holder, Part# 22919 1 Pc. Techniks Brand New CAT 40 3/4" x 3.50" 10,000 RPM Balanced End Mill Holder, Part# 22921 1 Pc. Techniks Brand New CAT 40 1" x 4.00" 10,000 RPM Balanced End Mill Holder, Part# 22925 1 Pc. Techniks Brand New CAT 40 1/2" x 4.00" SPU Precision Keyless Drill Chuck, Part# 22403 25 Pcs. Techniks Brand New CAT 40 Retention Knobs (Standard 40, 60 ro 90 Degree to fit your CNC Mill not special), Part# 1 Pc. Techniks Brand New CAT/BT 40 Side/Top Mount Tightning Fixture, Part# 07884 Qty. Part No. Description 8 22253 CAT 40 x ER32-2.76 3 22255 CAT 40 x ER32-4.00 2 04212IS ER 32 x 18 pc. collet set - inch 4 22225 CAT 40 x ER16-2.76 3 22227 CAT 40 x ER16-4.00 1 04209IS ER 16 x 10 pc. collet set - inch 1 22403 CAT 40 x SPU 1/2 x 4" 1 22911 CAT 40 x SLN 1/4" x 3" 1 22915 CAT 40 x SLN 3/8" x 3" 1 22917 CAT 40 x SLN 1/2" x 3" 1 22919 CAT 40 x SLN 5/8" x 3" 1 22921 CAT 40 x SLN 3/4" x 3.5" 1 22925 CAT 40 x SLN 1" x 4" 25 - CAT40 (45,60 or 90 Degree) Pull Stud/Retention Knob 2 04616 ER32 - E Wrench 2 04609 ER16 - A Wrench 1 07884 CAT 40 Top/Side Mount Fixture CAT 40 ER Collet Chuck Balanced to 25,000 RPM @ G2.5 T.I.R 0.0001" measured from taper to collet pocket Techniks Lab Certified each holder comes with a certificated verifying accuracy and balance ER Collet Set 0.0002" maximum run-out Each collet hand inspected CAT 40 End Mill Holder High precision bore (H5) is best in industry Balanced to 10,000 RPM Taper ground to AT3 for maximum spindle contact CAT 40 ER Collet Chucks Part#

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Manufacturer	Techniks
Balanced RPM	25,000 RPM
Shank/Taper	CAT 40
Application	CNC Mill (Haas, Fadal, Mori-Seiki, Matsura)
Collet Series	ER 16 & ER 32
Category	CNC Mill
Capacity Range	1/16" to 1/2" & 2mm to 13mm
Industry	Manufacturing & Metal-Working