104w Er8 Brushless Air-cooled Spindle Motor 10800rpm & Brushless Driver For Cnc

US $126.00

GREENFIELD, IN, United States
Aug 18th

Open on mobile:
QR code

Products Package: 1x 104w ER8 Brushless square spindle motor 1x DBD200 Brushless motor driver 1x Motor Support About this item Brushless BLDC Motor- Power 104W; Voltage:24V; Speed 10800 rpm; Rated Torque: 0.11N-m; 3Phase:U=Yellow V=Green W=Blue; Collet: ER8 Brushless Driver NBD200- CW & CCW Control; Speed control mode: 0-5V Analog mode and PWM mode; Supply voltage: 24V; Supply current: Minimum 5A. Features-1 1) Highly integrated and highly reliable brushless DC (BLDC) motor controller. The most direct change is that there is no spark from brush motor, it greatly reduces the interference of the spark to the remote control radio. 2)Three-phase full bridge, PWM square wave drive control. 3) Over-current protection measures, immediately turn off the output when overloaded, and protect the motor in time.4) High speed, high anti-interference ability.No brush & low interference. Low noise & smooth operation. The friction is reduced during work, run smoothly, and the noise is lower. 5) Low heat, Low maintenance cost, High power,Long life. Features: 1) Highly integrated and highly reliable brushless DC (BLDC) motor controller.The most direct change is that there is no spark from brush motor, it greatly reduces the interference of the spark to the remote control radio. 2) Three-phase full bridge, PWM square wave drive control. 3) Over-current protection measures, immediately turn off the output when overloaded, and protect the motor in time. 4) High speed, high anti-interference ability.No brush & low interference. Low noise & smooth operation. The friction is reduced during work, run smoothly, and the noise is lower. 5) Low heat, Low maintenance cost, High power,Long life. Basic parameters 1)Parameter of BLDC Motor Model:JK42BLS04-10 Output Power:104W Voltage: 24 VDC Load Current: 1.35 Amps Max Load Speed: 10800±10% rpm Rated Speed: 9000±10% rpm Collet: ER8 Rated Torque: 0.11N-m Torque Constant: 0.021N-m/A Number Of Poles: 8 Pole Phase To Phaseresistance: 0.12 Ohms Back EMF Constant: 2.2V KRPM 3Phase:U=Yellow V=Green W=Blue Size: 42x100mm Net Weight: 0.86kg 2) Parameter of Driver NBD200 CW & CCW Control Speed control mode: 0-5V Analog mode and PWM mode Supply voltage: 24V Supply current: Minimum 5A Net Weight: 0.15kg 3)Motor Support Hole diameter42mm Material:Aluminum Net Weight:0.2kg

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	3Phase	U=Yellow V=Green W=Blue
Rated Speed	9000±10% rpm
Modified Item	No
Collet	ER8
Country/Region of Manufacture	China
Rated Torque	0.11N-m
Custom Bundle	No
Number Of Poles	8 Pole
Item Type	Spindle Sleeve
MPN	Does Not Apply
Phase To Phaseresistance	0.12 Ohms
Brand	RATTMMOTOR
Load Speed	10800±10% rpm
UPC	Does not apply