10hp motor for sale, brand-new and used.

**sale** oliver 25" planer w/4 knife hss straight cutterhead for sale

**sale** oliver 25" planer w/4 knife hss straight cutterhead

  • Bonita Springs, Florida, United States
  • May 29th
For call TARA 239-272-1390 FOR SPECIAL PRICING--Oliver 25" Planer w/4 Knife HSS Straight Cutterhead The Oliver 4470 25” Planer puts other planers to shame. With two full feet of cutting width, over 9” of cutting capacity, and the ability to take up to 1/4” off in a single pass, this planer will take whatever you can dish out. The Digital Thickness Controller and Powered Table Travel eliminate guesswork, make dialing in settings a breeze.
**sale** oliver 22" planer w/byrd shelix cutterhead for sale

**sale** oliver 22" planer w/byrd shelix cutterhead

  • Bonita Springs, Florida, United States
  • May 29th
For call TARA 239-272-1390 FOR SPECIAL PRICING--Oliver 22" Planer w/Byrd Shelix Cutterhead The Oliver 4455 22” Planer puts other planers to shame. With a super wide capacity, it’ll handle stock up to 22” wide, and take up to 3/16” off in a single pass. But volume isn’t everything, this Oliver outputs stock that’s true and straight, thanks to a set of devices that work together to firmly guide stock through the machine.
**sale** oliver 22" planer w/2 sided insert helical cutterhead for sale

**sale** oliver 22" planer w/2 sided insert helical cutterhead

  • Bonita Springs, Florida, United States
  • May 29th
For call TARA 239-272-1390 FOR SPECIAL PRICING--Oliver 22" Planer w/2 Sided Insert Helical Cutterhead The Oliver 4455 22” Planer puts other planers to shame. With a super wide capacity, it’ll handle stock up to 22” wide, and take up to 3/16” off in a single pass. But volume isn’t everything, this Oliver outputs stock that’s true and straight, thanks to a set of devices that work together to firmly guide stock through the machine.
**sale** oliver 22" planer w/4 knife hss straight cutterhead for sale

**sale** oliver 22" planer w/4 knife hss straight cutterhead

  • Bonita Springs, Florida, United States
  • May 29th
For call TARA 239-272-1390 FOR SPECIAL PRICING--Oliver 22" Planer w/4 Knife HSS Straight Cutterhead The Oliver 4455 22” Planer puts other planers to shame. With a super wide capacity, it’ll handle stock up to 22” wide, and take up to 3/16” off in a single pass. But volume isn’t everything, this Oliver outputs stock that’s true and straight, thanks to a set of devices that work together to firmly guide stock through the machine.
Weg w21 severe duty motor, 10hp, 885rpm, 208-230/460v, 284tc fr, cx010408p *new* for sale

Weg w21 severe duty motor, 10hp, 885rpm, 208-230/460v, 284tc fr, cx010408p *new*

  • Suffern, New York, United States
  • Jun 1st
Auction is for one new Weg 10HP Motor as pictured. Local pickup or contact seller for freight options. P# 102570-A-CX010408P 10HP 284TC
Magnetek century e-plus 10hp 460 volt 3 phase motor 6-350137-03 fr s256t for sale

Magnetek century e-plus 10hp 460 volt 3 phase motor 6-350137-03 fr s256t

  • Watertown, Wisconsin, United States
  • Jun 2nd
Magnetek Century E-plus 10HP 460 volt 3 phase motor part number 6-350137-03 Frame S256T 2 speed - 1770RPM/1180RPM. See name plate in picture. This came from a Reznor rooftop unit that we scrapped, the motor is good.
Lenze ac tech 10hp 7.5kw vfd ac motor speed control 240v 3ph. for sale

Lenze ac tech 10hp 7.5kw vfd ac motor speed control 240v 3ph.

  • Manteo, North Carolina, United States
  • Jun 5th
Lenze VFD 7.5kw 10hp 3phase input 240v AC motor speed Lenze SMVector Variable Frequency Drive with Water Drip Rating - ESV752N02TXB Manufacturer: [Lenze / AC Tech] Series: [SMVector Series] Lead Time: [Ready To Ship] Horsepower: [10.0 HP] Input Voltage(s): [240 VAC Input] Output Vol
Wer dc 10hp motor with break and speed control for sale

Wer dc 10hp motor with break and speed control

  • Charleston, West Virginia, United States
  • Jun 7th
This listing is for a WER 10HP DC electric motor with electric break and speed control.   There are several pieces to the speed control and breaking functions including a control panel, motor start box and two cable interface boxes.  All items with this package are shown in the pictures.
Vintage ge general electric 1/10 hp 3450/2850 rpm 115v motor for sale

Vintage ge general electric 1/10 hp 3450/2850 rpm 115v motor

  • Santa Fe, New Mexico, United States
  • Jun 9th
This is an untested vintage General Electric model 5KC16GG26 1/10HP 3450/2850 RPM 115V Motor. Please see pictures for details and do not hesitate to message with any questions. May or may not function as I am unable to test the motor properly.
Elimia 3 phase disconnect switch w/ circuit breaker & enclosure 20hp 240v motor for sale

Elimia 3 phase disconnect switch w/ circuit breaker & enclosure 20hp 240v motor

  • Attalla, Alabama, United States
  • Jun 9th
Brand new built to order Elimia Disconnect Switch w/ Supplemental Circuit Breaker and Enclosure. Includes a premium heavy steel enclosure by Wiegmann, rated Nema 12. Enclosure:
Cutler hammer nema size 2 motor starter for sale

Cutler hammer nema size 2 motor starter

  • Stanhope, Iowa, United States
  • Jun 9th
This Cutler-Hammer Nema Size 2 motor Starter was used once on a piece of equipment for a test run and never used again. 120 Volt Coil series B1 Max 3 phase ratings 45 amp 200v-10HP 230v-15HP 480v-25HP Contact kit 6-34-2 Comes with 1045 size overloads and series as N.O. contact
Us motor 10hp premium efficiency for sale

Us motor 10hp premium efficiency

  • Hamden, Connecticut, United States
  • Jun 9th
A US Premium Efficiency Motor is being priced to sell due to storage restrictions. This motor is brand new and in perfect working condition. We offer a full 1 year warranty.
Waukesha sanitary pump stainless 10hp baldor motor good condition very low price for sale

Waukesha sanitary pump stainless 10hp baldor motor good condition very low price

  • Deer Park, New York, United States
  • Jun 9th
This is in good working condition a sanitary pump for food grade Waikesha Cherry-Burrell pump with a Baldor motor that's 10 HP pump weighs about 170lbs. This pump new it cost me $8950 and used can cost abut $3000 I'm selling it for a fraction of the cost $600 pl
Marathon electric motor 10hp 215t 1755rpm 200volt for sale

Marathon electric motor 10hp 215t 1755rpm 200volt

  • Cumberland, Maryland, United States
  • Jun 10th
Marathon model 9J 215TTFS7060AAW, 10hp, 1755, 215T, 200 volt only. This motor has been professionally rebuilt and has new koyo bearing. Run perfectly, local pick up or will deliver within 100 miles of 21502
Arco roto-phase rotary phase converter -- 3-phase converter + extras for sale

Arco roto-phase rotary phase converter -- 3-phase converter + extras

  • Monroeville, Pennsylvania, United States
  • Jun 10th
Arco Roto-Phase Rotary Phase Converter -- 3-Phase Converter + Starter, Disconnect, and Service Panel Arco Model B Roto-Phase I 10hp (25hp MAX capacity), 230V Rotary Phase Converter system including the following items: Arco Model B Roto-Phase I Rotary Phase Converter Enclosure w/ Capacitor Bank Magnetic Starter with Start/Stop Switch 100A Fused Disconnect Switch 100A 3-Phase Panel w/ Circuit Breakers 1-Phase Input: 230V 3-Phase Output: 230V 3-Phase A: 62.5 Max. Single HP: 10 Max.
10hp motor for sale, Industrial! polar air! 10hp 3 ph vsd rotary screw w/ 60 gallon tank10hp motor for sale, Brand new! polar air! 10hp 3 ph vsd rotary screw w/ 60 gallon tank10hp motor for sale, Brand new! eaton compressor! 10hp 3 ph vsd rotary screw w/ 60 gallon tank10hp motor for sale, Industrial! polar air! 10hp sp vsd rotary screw w/ 60 gallon tank10hp motor for sale, Brand new! polar air! 10hp sp vsd rotary screw w/ 60 gallon tank10hp motor for sale, Brand new! eaton compressor! 10hp sp vsd rotary screw w/ 60 gallon tank10hp motor for sale, Berkeley centrifugal pump b2tpms water pump 3450 rpm w/ 10hp baldor motor10hp motor for sale, Rebuilt baldor m2393 10hp 208-230/460v-ac 3450rpm 254u 3ph electric motor10hp motor for sale, Hollymatic gmg 180a 10hp meat mixer grinder10hp motor for sale, Polymer machinery 10hp granulator poly grinder  9"x12"10hp motor for sale, 5" x 4" bell & gossett 1510 bf centrifugal end suction pump 10hp new z53 (1826)10hp motor for sale, 10 hp v4 3 ph 80 gallon vertical air compressor by eaton10hp motor for sale, 10 hp v4 3 phase 80 gallon vertical air compressor by eaton10hp motor for sale, Sumitomo, nt2014-7a5, 460v, 3ph, 10hp, 15a10hp motor for sale, Nib.. westinghouse ss disconnect/starter cat# a203w1aza .. 10hp, size 1 . vx-00110hp motor for sale, 10hp hammer mill flour mill grind wheat grains small 5ks215bc205b motor10hp motor for sale, Eaton compressor industrial 10/10 hp 3 phase 120 gallon air compressor10hp motor for sale, Industrial eaton 10/15hp single phase 120 gallon vertical air compressor10hp motor for sale, Marathon electric motor y303 184ttdr7612 7-10hp 184tzfr 3ph crop dry  drip proof10hp motor for sale, Century brushless hvac dc motor, 1/10hp 120 volt 3-speed ecm motor # cs89

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies