I have been running this saw since new and it has not been abused or in a high production environment.This saw is a very heavy built saw and everything is tight including all pivot points.The only problem this saw had was the paint from day one was not very good.
The 2500 Series is DBCI's heavy-duty steel curtain roll-up door with tremendous versatility and unmatched quality. The 2500 Series has deep engagement guides creating greater durability and stronger, longer lasting performance. DBCI's commercial-grade steel curtain roll-up doors are designed to meet and/or exceed operational requirements for commercial doors with little or no maintenance and are a less expensive alternative compared to traditional warehouse and freight facility doors.
To Pay by Credit Card, call 888-50-DRYER, Or Checkout through Ebay using PayPal Here is what is 100% Absolutely FREE with this purchase: FREE Installed 1.1 Quiet Nozzle to REDUCE Noise by 10 decibles from Original Xlerators
These bins are used and therefore, you will see some wear at the bottom of the drawers from pulling the drawers in and out. There are also various labels and stickers attached. Nothing a little elbow grease and goo-off can't take care of.
11 Aluminum Retensionable Screen Printing Frames - Square Tubed Allen Fastened. Good condition but most have screens with keepers and may have a little paint on.. Allen bolts loosen to spread frames.
WELCOME TO RIVERCITY INDUSTRIAL SUPPLY! PHONE: 763-789-BOLT (2658) FAX: 763-789-NUTS (6887) For more tools and fasteners please view my other items. These assortments should stop the running to the hardware store all the time.
GRADE 8 ASSORTMENT WITH HEX BOLTS, NUTS, FLAT WASHERS, & LOCK WASHERS 2075 PIECES ALL ITEMS ARE BOXED WITH LABELS! GRADE 8 BOLTS: (100) 1/4-20 X 1/2 (100) 1/4-20 X 3/4 (100) 1/4-20 X 1 (100) 1/4-20 X 1 1/2 (100) 1/4-20 X 2 (100) 5/16-18 X 3/4 (100) 5/16-18 X 1
For sale is a group of Eclipse Counter-bore Twist Lock Morse Taper Holders / Shanks and Spot Face Cutters. Some of the cutters and pilot bolts show some rust as pictured. Some do not have the pilot bolts, there are some extra pilot bolts but I am not sure if they are the right sizes are not.
UCF 209-27 Four Bolt Flange (2 Pieces) 1 11/16" Bore 4-Bolt Flange Center to Center on Bolts 5 13/32" Industrial Strength Mounted Bearings with Ball Bearing Inserts
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
