11/16 bolt for sale, brand-new and used.

NEW U-bolt(s) are made of Type 304 stainless steel and provide excellent corrosion resistance. A quanity of six are available.

Specifications Working Load Limit: 1,350 LBS Image of Specifications for Machine Eye Bolt - Stainless Steel"A" = 3/8" "B" = 1-9/16" "C" = 1" "D" = 3/4" "E" = 11/16" Description Machine eye bolts are often referred to as lifting eye bolts since they are commonly used as a connection point in lifting systems. Shoulder machinery eyebolts should always be used for angled lifts, because the shoulder gives it greater strength.

Genuine U.S. Military Issue Surplus   Steel Machine Bolt - P/N: C7564 P/N: C7564 We are not sure who manufactured this part, we came up with the following.... Cooper Cameron Corp.

Grade 5 SAE bolt set with nuts, lock washers, and some flat washers. Sizes 5/16-18, 3/8-16, 7/16-14, 1/2-13, and 5/8-11. Lengths range from 1 inch to 3.5 inch.

This auction is for (1) 5/16 diameter shoulder bolt with 1/4-20 threads and allen wrench drive. I have many different lengths available: 1/2" 5/8" 3/4" 1" 11/4" 11/2" 13/4" & 2" Sizes are the length of the shoulder Please email for desired length Bolts are new and have never been used (new old stock). Made of alloy steel with a ground finish on the shoulder.

Genuine U.S. Military Issue Surplus   Metal Hanger Clamp with Stainless Steel Bolt Assembly 1 7/8" Inner Diameter 2 1/4" Outer Diameter x 11/16" Wide There is a 5/8" Length x 1/4" width slot one end. (See Picture) The overall length is 4 5/8" The hanger clamp is made of magnetic steel.

Genuine U.S. Military Issue Surplus   Lot of 2 - Raytheon  Tee Head Stainless Steel Bolts P/N: 4023519-0001 NSN: 5306-00-846-1088  Characteristics Thread Class: 2A Thread Direction: Right-hand Thread Length:   0.750 inches minimum and 0.780 inches maximum Fastener Length: 1.471 inches minimum and 1.501 inches maximum Head Style:     Tee no.

4" Casters Set Set includes 2 Swivel and 2 Rigid with brake Wheel size is 4" (4 3/4" from bottom of caster to top of plate). Hole Dimensions, Plate size: TOP PLATE SIZE IS 3 11/16 LONG X 2 3/4" WIDE BOLT HOLES ARE 3/8" bolt holes are centered at 3" long and 1 3/4" Wheel width 2.00" Weight capacity 175lbs per wheel.

Loaded Storage rack. Eight separate cabinets with 6 bins each. Excellent condition.

7-1/8" long Flush bolt. This has been removed from the original packaging for QC check. It includes 4 screws as shown and one strike plate as shown.

This is a Simpson Strong Tie, Bolt in Hold Down, HD8A. It measures 14-11/16" high x 3" wide. the holes are 15/16" to accept a 7/8" bolt.

Untitled Document

55pc Master Screw Extractor and Left Hand Drill Bit Set,Bolt and Stud Removers 04202A FREE SHIPPING LOWER 48 STATES This a