11/32 drill bit for sale, brand-new and used.

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

This is for a Chicago-Latrobe Straight Shank Taper Length Drill Bit 31/32" EDP# 49762 - NEW Overall length = 11-1/4" This bit is MADE in the USA

The Lotoons Store NEW 11/32 HSS Standard Brad Point Drill Bit

Lot of 9 Morse brand bits. Used but in good condition. May need sharping.

Hilti Concrete Hammer Drill Bitdrills a 27/32" hole up to bit more than 9" deepstill semi sharp, was only used a few timesshaft is 11/16" with four spline connectionmodel SDS plus C 1 TE-YX #340699made in Germanyinv:f1t4d1 WE ARE:

* Maxtech Titanium Coated Drill Bit Set 51043MX In Hard Case Sizes and quantity of bits (count may be off a little with sizes of multiple bits):3/64 23 bits1/16 19 bits5/64 20 bits3/32 13 bits1/8 14 bits9/64 16 bits5/32 3 bits11/64 5 bits3/16 4 bits7/32 3 bits13/64 3 bits15/64 2 bits1/4 2 bits17/64 2 bits9/32 2 bits5/16 2 bits23/64 1 bit3/8 1 bit1/2 1 bit Comes as pictured val

Ryobi A989801 98-Piece Drill/Driver Set With Case Product Details All bits are packed in a durable plastic case to help keep your bits organized Drill bits included feature the 135 degree split point which helps prevent walking while drilling (56) 1 in. screwdriver bits (1) PH0, (2) PH1, (6) PH2, (2) PH3, (2) SL3-4, (2) SL 4-5, (2) SL6-8, SQ3, (2) T-10, (2) T-15, (3) T-20, (3) T-25, (2) T-30, (2) T-40, (1) HEX 1/16 in (23) 2 in.

This is a HSS Inch System Taper Shank Twist Drill bit, 31/32" It is marked "HSS 31/32" on it. The overall length is 11 inches, flute length is approximately 6 inches. Was found in the original sealed packaging, I removed it from the package to inspect and photograph.

This is a HSS Taper Shank Twist Drill bit, 3MT 1-1/32" The overall length is 11 inches, flute length is approximately 6 1/2 inches. Was found in the original packaging. Appears to be in excellent condition.

Ryobi A989801 98-Piece Drill/Driver Set With Case * FAST SHIPPING / SEE OUR FEEDBACK / NO EXTRA CHARGE * Ryobi introduces the Ryobi 98-Piece Drill and Drive Kit

Here we have 12 NEW M7 Steel extra length drills, decimal is .161" Just a touch over 5/32" and just a touch under 11/64" US MADE BY Eclipse Industrial Products Co. They are often called double margin step drills, They are 6" long, and have 2" of Flute length. The tip is just a little bit smaller than the rest of the drill, it measures .122" so you have a built in pilot drill.

Description: Lot 10pcs Straight Shank M35 HSSCo Twist Drill 0.9mm(.0354") For Stainless Steel Specification: Cutting dia(D): 0.9 mm(.0354") Total length(L): 32 mm

PARABOLIC Jobbers Length Drills 15/32" Parabolic flute drills are designed for deep hole drilling (a deep hole is any hole that is deeper than 4 times the diameter of the drill bit). The special flute pattern is capable of drawing chips up quickly from deeper distances. This eliminates the need for frequent drill withdrawal to clear chips from the hole.

UP FOR SALE JOBBER DRILL BITS , HERE ARE THE SPECS : Material

New Old Stock! Titex 11/64' (.1719") Cobalt Parabolic Jobbers Length Drill Bit. Part Number 016390, MSC #01496116.

here are a lot of new and one used drill bit,,we have a morse 5/8,,and a morse 17/32 with a #2 shank,,new bits/////champion 11/16 drill #2 shankused,, 3/dura-point carbide tipped,, type 150/9/16//type 120 1/2drill///type 150 17/32 drill LOT OF 6 BITS//////