112-40 for sale, brand-new and used.

FOR SALE IS A CHAR-LYNN EATON CORP HYDRAULIC MOTOR. NEAR AS I CAN MAKE OUT THE TAG READS 112-1068-005. SPECS ARE 30 CUBIC INCHES 40 GALLON PER MINUTE 3000 PSI 12,800 INCH POUNDS OF TORQUE.

BT#: 2652 Clx # 14 You are looking for: ORC MERCURY VAPOR LAMP ML-15D-40-15 OE 40MM

Here is new in box Lever Block #HSH-A 620 1.5ton chain hoist. It weighs 32lbs with-out box. So shipping is based on west coast rates, if you live closer to PA.

PRICE IS FOR 25 USED (once only), 3,000 lb. capacity, One Half Yard, EMPTIED BAGS WITH TRACES OF LOOSE ABRASIVE Not imprinted except for manufacturer's label. PANEL SIZES 28” X 28” X 30” HIGH.

Description: Pool/Spa Pump, Self Priming, 2 HP, 1 Phase, 115/230 Voltage, 19.5/9.7 Amps, Motor Type Capacitor Start/Capacitor Run, Open Dripproof Motor Enclosure, 56J NEMA/IEC Frame, GPM of Water @ 10 Ft. of Head 125, 112, 99, 82, 58, 3450 RPM, Bronze, Stainless Steel Impeller, Standards CSA US, UL1081, Features Clog Resistant Semi-Open Impeller, Aluminum Motor Adapter, Mechanical Seal Buna N, Stainless Steel and Ceramic Parts, Buna N O-rings, Stainless Steel Shaft.

Item Description Pump, Submersible Fountain, 1 HP, Outlet 1 In FNPT, Voltage 230, Brass Housing, Impeller Material Brass, Seal Material Carbon/Ceramic, Buna N, Stainless Steel, Cord Length 12 Ft, Max. Head 55 Ft., Port Rotation 90 Degree Increments, Continuous Duty, For Waterfall and Stream Uses, Use With Nonflammable Liquids Compatible with Pump Component Materials

Warehouse Closing Down Sale! Retail Price: $620 Pedestal Pump, Power Rating 1 1/2, 3/4, 1/2, 1/4 HP, Motor Speed 3450/2800/2300/1725 RPM, Maximum Head 112/76/50/28 Feet, Flow @ Total Head 59/49/38/23 GPM, Water Flow @ 20 Feet of Head 55/43/32/14 GPM, Water Flow @ 30 Feet of Head 52/37/25 GPM, Water Flow @ 40 Feet of Head 48/32/15 GPM, Water Flow @ 50 Feet of Head 44/26 GPM, Water Flow @ 60 Feet of Head 40/18 GPM Item

Your bid buys a new Velvac # 697112 back up alarm. Condition: New Operating Voltage: 12-24 Vdc. Operating Current: 550 mA max.

KLINGSPOR CS 561 ALUMINUM OXIDE 4-1/2" FIBRE DISCS 4-1/2" X 7/8" 80 GRIT (1 pack 25 pieces) These ALUMINUM OXIDE discs are perfect for most metal grinding applications where major stock removal is NOT necessary. Removal of surface contaminants and smoothing of mild weld seams are the CS 561’s forte.

HEXAGON BROACH CONDITION = NEW HEXAGON BROACH MANUFACTURER = USA BROACH MATERIAL = HIGH SPEED STEEL BROACH HEX SIZE = 15/32" {.4688"} TOLERANCE = .4385" - 4700" BROACH LENGTH = 12-3/8" PILOT DIAMETER = 15/32" DRILL SIZE = 15/32" LENGTH OF CUT MINIMUM/MAXIMUM = 1/2" (.500") 1-3/8" (1.375") YOUR COST = $112.40

Description: Lot New 10 pcs Straight Shank HSS(M2) Twist drills Bits 3.7mm Long Jobber Drills Specification: Dia(D): 3.7mm Overall length(L): 112 mm Flute length(F): 73

Description: Lot New 10 pcs Straight Shank HSS(M2) Twist drills Bits 3.6mm Long Jobber Drills Specification: Dia(D): 3.6mm Overall length(L): 112 mm Flute length(F): 73

Description: Lot New 10 pcs Straight Shank HSS(M2) Twist drills Bits 3.4mm Long Jobber Drills Specification: Dia(D): 3.4mm Overall length(L): 112 mm Flute length(F): 73

Description: Lot New 10 pcs Straight Shank HSS(M2) Twist drills Bits 3.5mm Long Jobber Drills Specification: Dia(D): 3.5mm Overall length(L): 112 mm Flute length(F): 73

90 EA MILITARY STANDARDS SCREW MACHINE NSN 5305-00-945-0506, P/N MS35275-216 NOS CONDITION. 14 DAY WARRANTY FOR COMPLETE REFUND. PRODUCT TAG AS SHOWN.

SCREW MACHINE DRILL CONDITION = NEW SCREW MACHINE DRILL MANUFACTURER = ECLIPSE (USA) SCREW MACHINE DRILL MATERIAL = HIGH SPEED STEEL USED ON MATERIALS FORMING LONG OR SHORT CHIPS SUCH AS = STEEL(S), CAST IRON, MALLEABLE IRON, SINTERED IRON, NON -FERROUS MATERIALS, ALUMINUM, BRASS, COPPER SCREW MACHINE DRILL DIAMETER = #12 (.1890") SCREW MACHINE DRILL FLUTE LENGTH = 1-3/16" SCREW MACHINE DRILL OVERALL LENGTH = 2-1/4"

SCREW MACHINE DRILL CONDITION = NEW SCREW MACHINE DRILL MANUFACTURER = NACHI (JAPAN) SCREW MACHINE DRILL MATERIAL = HIGH SPEED STEEL USED ON MATERIALS FORMING LONG OR SHORT CHIPS SUCH AS = STEEL(S), CAST IRON, MALLEABLE IRON, SINTERED IRON, NON -FERROUS MATERIALS, ALUMINUM, BRASS, COPPER SCREW MACHINE DRILL DIAMETER = #12 (.1890") SCREW MACHINE DRILL FLUTE LENGTH = 1-3/16" SCREW MACHINE DRILL OVERALL LENGTH = 2-1/4"