XL3025A XLA SERIES MINARIK ELECTRIC PULSE-WIDTH MODULATED VARIABLE SPEED DC DRIVE MAX. ARMATURE CURRENT 3.0 AMPS DC HP RANGE 1/20-1/4 (115VAC) 1/8-1/3 (230VAC) AC Line Voltage 115 VAC or 230 VAC ±10%, 50/60 Hz, single phase Field Voltage (115 VAC Input) 50VDC/100VDC
We do honor our 14 day return policy, if you should get an item that does not work, unless otherwise stated in that items description. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES, IS WHAT WE SEND TO YOU!!!!
Motor Control For sale is one Minarik Corporation Motor Control. Item is used, but in good condition. Unit shows signs of minor cosmetic wear, but nothing that will affect the unit's function.
All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item.
Filtered SCR DC Basic Speed Control (Open Chassis) Bodine #830 Product Description: Bodine’s versatile Type-FPM SCR controls are intended for use with Bodine’s 130VDC Permanent Magnet (PM) 1/50 to 1/3 HP motors. Each control can cover a range of horsepowers, and can be adjusted for use with a particular Bodine motor by simply setting a “DIP switch” and selecting the proper armature fuse. Type-FPM controls provide pure DC (negligible ripple, Form Factor 1.0) to the motors.
KB Electronics Inc. DC Motor Speed Control KBIC-120 (9429A) Input 115 VAC - 50/60 Hz Output 0-90 VDC Rated 6.0 ADC, 12.0 ADC w/Aux Heatsink Used but very low hours, almost like new!
KB Electronics Inc. Variable Frequency AC Drive KBVF-21D Input 115/230 VAC 50/60 Hz Max. AC Line Current 4.0/2.5 Amps Output 0-230 VAC, 0-50, 60, 100, 120 Hz Rated 1.0 Amp/Phase Used but very low hours, almost like new!
Dayton Shutter linear motor that I converted to a horizontal mounting position with a custom handcrafted bracket. If vertical use is necessary, I can weld a metal baseplate to it for an additional $10 (you drill the holes). In storage for over 20 years.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.