115-60 for sale, brand-new and used.

SquareTrade © AP6.0

AC GearmotorVoltage Rating 105/115 VAC, 1 Phase, 60/50 HzNameplate RPM 43, Full Load Torque (In.-Lbs.) 55.0, Overhung Load (Lb.) 110, Input HP 1/12, Gear Ratio 40:1, Full Load Amps 1.30TENV Enclosure, None Thermal Protection, All Position Mounting, Motor Type Permanent Split Capacitor this gearmotor was a back-up that was never used and is no longer available from grainger. 1 knockout was removed and strain relief connector was installed and then taken out.

This Ebay item is a LOT of used equipment by Varian. IT is a LOT of -2- Varian 862 Vacuum Ionization Gauge as pictured. The label in back says these are: Model 862, Volts 115/230, Freq 50/60, Watts 100.

NEW ABB BALDOR DC SCR 2 HP MOTOR SPEED CONTROL MODEL No. BC154 INPUT: 115/230 VOLT AC - 50/60 Hz RATED: 10.2 AMPS DC - 15 AMPS AC shipping will be $11.00 for the lower 48 states Specifications: BC154 Cat

Title: Dongan 6.0 KVA General Purpose Transformer, 63-0706, 3 Phase, USED

Baldor Reliance Motor

This listing is for a brand new LEESON 1-1/2HP Agricultural Duty C Face Less Base motor #110495. This motor is still in the box with the original packaging. Due to the weight of this motor, the freight carrier needs your contact number.

Touch Screen HITECH HMI PWS5600S-S 320X240 5.7 inch 1 COM Original brand new PWS 5600S has a 5.7" graphic touchscreen display with 16 shades of gray and a resolution of 320x240 pixels. There is one communication port supporting RS232, RS422 and RS485.

The items are USED and sold AS-IS, but were removed from service in a working condition. Below are the detail from the manufacturers page and I believe all products are current. Stepper Motor The HT34-490 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications.

Inventory #: MOT3311 Manufacturer: Baldor HP: .5 Frame: 56C Enclosure: XPFC Voltage: 115/230 AC/DC: AC Phase: Single RPM: 1140 Model/Catalog #: VL5005A Amps: 8/4 Description: Hazardous Location Motor Hz: 60 Shaft Size (in.): .625 No box, old stock, C Face Footless, Suitable for use Class I Group D, Clas

Marathon

This listing is for a brand new LEESON 3HP Compressor Duty Rigid Base Capacitor Start motor #131534. This motor is still in the box with the original packaging. Due to the weight of this motor, the freight carrier needs your contact number.

NEW!! Qty-1-In stock at time of original listing, Dart Controls DM8000 4-in-1 Programmable Tachometer, field programmable digital tachometer for rate and time, catalog #DM8000 115vac input, 120v, 240v, for more information contact Mike Burvan @ 219-922-2668, burv@jorsm.com or visit www.midwestpowerproducts.com Manual: http://www.dartcontrols.com/Manuals/DM8000Manual.pdf

General Information Additional Part No(s): C56H6711, 781568108369, CWDL3507