12 bearing for sale, brand-new and used.

This sale is for a Laboratory Surplus Thomson Industries 2BA08ONEL20 Linear Bearing Slide Rail Assembly 18 3/16" Of Travel. This Unit was removed from A Fully Functioning Obsolete Piece Of Laboratory Equipment That Had Very Low Hours On It. I guarantee it to be in excellent operational and cosmetic condition.

MP Pumps FLOMAX 8 Cast Iron PUMPAK With Bearing Pedastal, 3/4" keyed shaft. — 6000 GPH, 40 PSI, 2 x 2 FLOMAX 8 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25' above the source. Once primed, the pump's built-in flapper valve will maintain a full column of liquid in the suction line.

PLEASE NOTE THIS IS TUBE SET ONLY---NO MOTOR OR STATOR SUPPLIED.THESE ARE NORMALLY SOLD SEPARATELY AND YOU PURCHASE STATOR TO SUIT YOUR REQUIREMENTS.

MGPM-Z, Standard Guided Cylinder, Slide Bearing The MGPM is a compact body actuator integrated with internal guide shafts to isolate the load bearing from the movement of the actuator's rod and seals. The carbon steel alloy slide bearing provides lateral stability protecting it from side load impacts, suitable for stopping applications.

CEWDM3550 1.5HP, 3500RPM, 3PH, 60HZ, 56, C, 3528M, TENV, F

VL1306A .75HP, 3450RPM, 1PH, 60HZ, 56C, 3424L, OPEN, F1

STOCK PHOTO, PICTURE IS NOT ACTUAL ITEM VEM31120 1.5HP, 3490RPM, 3PH, 60HZ, 56

EM7056T 15/20HP, 1465/1765RPM, 3PH, 50/60HZ, 256T

You are bidding on a rail and bearing block, the rail measures 101 mm long and 12 mm wide, the bearing block is 34mm x 27mm with 4 mounting holes on it. i don't know much about these other than they were removed from decommisioned equipment  and they work fine, the bearing block is labeled, THK SRS12M

Ampro A3026 1/4-INCH

This Sale Is For Two Laboratory Surplus Schneeberger MNN-12-G1 MN12-G1-V1 Linear Bearing Slide Block Rail That Is 7 3/4" In Total Length. This Unit was removed from A Fully Functioning Obsolete Piece Of Laboratory Equipment That Had Very Low Hours On It. I guarantee it to be in excellent operational and great cosmetic condition.

This Sale Is For Two Laboratory Surplus Schneeberger MNN-12-G1 MN12-G1-V1 Linear Bearing Slide Block Rail That Is 6 11/16" In Total Length. This Unit was removed from A Fully Functioning Obsolete Piece Of Laboratory Equipment That Had Very Low Hours On It. I guarantee it to be in excellent operational and great cosmetic condition.

Ampro Tools Ampro A3026 1/4-INCH Mini Die Grinder

Benefits Three oversized matched angular contact bearings with the bearing preload set at the factory. Special spindle-like point extends into the shank where it is supported by a needle bearing, increasing rigidity, reducing point deflection and dampening vibration. Lockout to maintain factory-set preload.

#content div.supportheader { position: absolute; left: 29px; top: 32px; width: 686px; height: 30px; } body, div, h1, h2, h3, h4, p, ul, ol, li, dl, dt, dd, img, form, fieldset, blockquote { border: 0px; line-height: 20px; margin: 0px; } *

New EMB PAPST model 4412FM fan. German made fan with ball bearings. Allied Electronic's price is $30.38 each Manufacturer: ebm-papst Current Type: DC Supply Voltage: 12 V (7 to 12.6 VDC) Airflow: 82.4 CFM Bearing Type: &nb