12 flange for sale, brand-new and used.

Hi, up for sale is 5 sets of Mini, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/4"-20 removable threads, 2" long, with knurled nuts.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Vertex, 5 inch, 3 Jaw Self Centering, Lathe, Chuck, New. var numImgsLoaded = 0; function autoSizeImageForSlideshow(imageIndex, maxWid

Vertex, Milling Clamping Kit, 52 pcs, slot 1/2", stud 3/8", New. var numImgsLoaded = 0; function autoSizeImageForSlideshow(imageIndex, maxWi

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900") 5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

Vertex, Milling Adjustable Angle Plate, 600 mm x 300 mm x 202 mm, New var numImgsLoaded = 0; function autoSizeImageForSlideshow(imag

Vertex, Milling, Universal Dividing Head with 6" 3 Jaw Chuck, New. var numImgsLoaded = 0; function autoSizeImageForSlideshow(imageIn

All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item.

This listing is for Split Tie Bar Bushings. Not sure of manufacturer, possibly Van Dorn. Part # is 38704.

1,150 Gallon SS Pressure Rated Tank, Dome Top Dish Bottom Last used in a Distillery MFG by ADM Serial #T-03386 NB #03386 Pressure Rated tank MAWP 15 PSIG 300^ F Max Temp rating Dimensions 60" dia x 96" sidewall Overall Height 148" 34" Legs 12" Dome top 12" Dish Bottom 4" Center discharge with 8 bolt ANSI Flange fitting Multiple inlet ports