12 hp water pump for sale, brand-new and used.

I have for sale a new 1 hp 10 gpm submersible well pump. It is possible that you don't need a 1 hp pump, a over sized pump does not last longer it only increases the depth you can pump water from. feel free to call me at 920 296 2926 with any questions regarding install or product information be sure before you buy!

var itemNumber = window.ebayItemID ?

[ Bell & Gossett PD35S 1/2 HP 115/230 V 1725 RPM 5.2/2.6 A Hot Water Pump

This WAS used. It had broken parts but the motor, pump, and switch have all been replaced brand new. Solution & Recovery TankVacuum Moto

This is a Bell & Gossett water pump model 1510 BF 6.25 4AC -S. California Hydronics Corp Model 1510. We removed this pump from a Waukesha Co-Gen application that was in fully operational condition.

[ Dayton 4/14 HP 115 V 2750 RPM Submersible Sewage Pump

Office: 830-775-2580 Our Asset #:KSC644 / 01 Qty available:1 Avenger AV 12QX 12 gallon self-contained Carpet Extractor NEW TANK LID & GASKET Gallery Photo

Up for sale is a NEW/UNUSED Berkely 7SN 3/4 HP 1 PH ProJet Shallow Well Jet Pump SN Series 115/230V Specs: 3/4 Hp, 12.2/6.1 Max. Load Amp, 1-1/4" Suction, 1" Discharge, 115/230 Volts Included in this auction: 1- 7SN Pump and Motor SN Series ProJet Shallow Well Jet Pumps

Please call us if you have any questions. We want you to get the right equipment - 1-855-4Elimia. This is for a new magnetic motor starter designed to run air compressors or pumps or any machine that automatically runs based on it's settings.

The Shop-Vac Industrial Ultra Pump vacuum lets you pick up water from one place and pump it to another using a standard garden hose it even allows you to continue vacuuming while you empty the tank. Pump moves water up to 50 feet @ 6 GPM. U.S.A.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.