ID# P-2-041(w) Mode X36AF, 1968 Model year 5 HP, 220V, 3 PhaseMachine is in the final stages of being Cleaned, checked, repaired and repainted as necessary. We left the original wood top on it, but could replace it for the full asking price. Good running condition.
YOU ARE BIDDING ON A: Radial Arm Saw is a Delta Rockwell, 14” Capacity, 5 HP, 230/460V, 3 Phase, 3450 RPM, 12.8/6.4 Amps, Rockwell No. 438-02-314-0901, Model No. 33-382 S/N LN3314 UNIT WORKS BUT NEEDS REFURBISHED.
Bought this saw, but never set up wood shop to use it, it has sat a few years untouched. Specs in the pictures above, taken from Delta Catalog I have this listed as local pickup only. For the right buyer, its possible I can crate this, but considering the weight, it will be a costly freight.
Speed-Cut Radial Arm Truss Saw Model SSA-17 42" Throw on saw 16" Blade 12" x 8' Table Baldor 5 HP Industrial Motor 208-230/460v 3 Phase 1725 RPM Conveyors for both side Runs and cuts great
Positive miter stops for quick adjustments to 15, 22.5, 31.6, and 45 degrees to the left and right. Precise compound cuts with 48 degree bevel angle left and 5 degree bevel angle right Only 31lbs for lightweight portability Powered by a 9.5 Amp motor Product Description Product Description Hitachi C8FSE 9.5-Amp 8-1/2-Inch Sliding Compound Miter Saw
RN 450 Radial Arm Saw: Single Phase, 230 Volt, 2900 Watts, 72 Tooth - 12 inch Blade, 1 inch Arbor, 3400 PRM, 60 Hertz. The Arm Saw was purchased in August 9, 2002 and has been in shop these 13 years - unused. The machine lay new in-box and remains unopened.
Hello, I acquired this saw some time ago and have not used it enough to warrant keeping it even though I love it! You simply do not see a vintage saw in this condition! Works Perfect!
Concord Blades ACB0725T060HP 7-1/4-Inch 60 Teeth TCT Non-Ferrous Metal Saw Blade Size: 7-1/4-Inch 60 Teeth This industrial standard aluminum cutting carbide saw blade has construction grade titanium carbide teeth that allow you to easily cut through aluminum and non-ferrous metals such as copper, brass, bronze, etc. Can be used to cut other difficult materials such as plastic, PVC tubing and fiberglass.
Concord Blades ACB1200T060HP 12-Inch 60 Teeth TCT Non-Ferrous Metal Saw Blade Product Features TCG Grind: Triple Chip Grind allows for smooth cut on non ferrous and plastic items Ultra sharp, hard titanium carbide Ideal for cutting non ferrous metals such as Aluminum, Brass, copper, bronze and more as well as plas
Product Features Enter your model number above to make sure this fits. TCG Grind: Triple Chip Grind allows for smooth cut on non ferrous and plastic items Ultra sharp, hard titanium carbide Ideal for cutting non ferrous metals such as Aluminum, Brass, copper, bronze and more as well as plastics, plexiglass, PV
Vintage Dewalt Model ? Radial Arm Saw 1.5 Horse Power Fixer Upper De Walt 12". Saw has not run for some many years, motor does turn freely by hand and all the levers and slides move, just stiffly.
Vintage Dewalt Model GP Radial Arm Saw 3 Horse Power Fixer Upper De Walt 12". Saw has not run for some many years, motor does turn freely by hand and all the levers and slides move, just stiffly. Comes with whats pictured, anything you dont see that may have originally had is no longer with the saw.
Original Saw Company 12" Radial Arm Saw Model 3512-03 3hp 208-230/460 3ph TEFC MotorAutomatic Brake 1" X 2 3/16" Arbor Saw is in excellent condition. Functions perfectly, no issues or damage. This model saw is $4100 new, this one is in nearly new condition for a fraction of the price.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.