3M TOUCH SCREEN 11-71315-225-01 15IN LCD CAP TOUCH 500:1 1024X Basically new never used just tested with a small barely noticeable mark on the front bottom right. Tested working feel free to send any questions you might have I'll do my best to answer them. Main Features:
This auction is for a 40 x 80 x13 Steel Truss Pole Building. The plans included are the plans I submitted to the building department and were accepted and show live and dead loads also snow and wind loads on the building. The building was purchased as an aircraft hangar and was ordered before we found out that two HOA members on the airpark would not allow this building to be built on our property.
The abyx-Gk5 CUSTOM FULL FEATURED Arduino compatible DIY Geiger Counter Kit 123 by Atomic.dave FEATURES: Internal Alpha Beta Gamma Xray ULTRA-Sensitive American made LND7317 Pancake tube with Ludlum 44-9
This auction is for one lot of 25 1" Round Caps. If you need an different size, quantity or Buy it Now then please visit my store. These are plastic round caps used to protect the ends of light weight round tubing.
This auction is for one lot 10 1.50" round caps. If you need another size, quantity or Buy it Now please check my store. These are plastic round caps used to protect the ends of light weight round tubing.
These are plastic round caps used to protect the ends of light weight round tubing. These caps are for 2 inch round tubing and should fit tubing from .040 to .095 in wall thickness (aproximately 12 to 20 gauge). The lot you are bidding on is a lot of 15.
These are plastic square caps used to protect the ends of light weight square plastic tubing. These caps are for 1/2 inch square tubing and should fit tubing from .030 to .065 in wall thickness. The lot you are bidding on three (3) plugs please order the number you want.
This auction is for one lot of 50 3/4" square plastic caps. If you need a different size, quantity or Buy it Now please see my store. These are plastic square caps used to protect the ends of light weight square plastic tubing.
These are plastic square caps used to protect the ends of light weight square plastic tubing. These caps are for 1.50 inch square tubing and should fit tubing from .040 to .090 in wall thickness. The lot you are bidding on two (2) plugs please order the number you want.
These are plastic square caps used to protect the ends of light weight square plastic tubing. These caps are for 2.00 inch square tubing and should fit tubing from .040 to .090 in wall thickness. You are bidding on one plug, please order the number you want.
This 3 hole punch has been tested and works as it should. I found it at a yard sale with one end cap missing on one side, so I refurbished it by removed the other cap and replace both bolts to match. It is also missing the residue hole piece catcher.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.