125 gauge for sale, brand-new and used.

Technical Specs

Here is my NEMA 14-50 and full KVA plug 4 foot extension cord. It allows you to reach a little further with a 14-50 plug into the 4 prong outlet. The cord is about 4 feet long, brand new and uses 8 gauge lines and 10 gauge ground and neutral wires.

New Never Used But Box Has Been Open. Bought From Acution Was Display Model Basic wire welding for projects and repairs around the shop farm or home that where the Weld-Pak 125HD comes in handy! Plug in the Weld-Pak 125HD anywhere common 120 volt input power is available.

For sale is a New Open Box Tested Once item to make sure works. Comes with original box and manual. Thanks for looking details below.

NEW! SMITH STAGE 2 OXGEN REGULATOR P/N - 35-125-540 Smith's Series 35 two stage regulators drop cylinder pressure to working pressure in two stages for consistent and accurate outlet pressure and flow regardless of inlet pressure. These regulators are recommended where outlet pressure and flow must be maintained without variation.

METAL MAN FC125 115 volt input, 125 amp AC output flux core only wire feed welders is economical and easy to use. It requires no shielding gas and welds 8 gauge to 3/16" mild steel materials with .030" or .035" flux core wires on 4" or 8" spools. Features 2 voltage ranges, set up chart, cooling fan, trigger activated arc, overload protection, 6 ft MIG gun with Tweco style series 11 replacement parts and 6 ft ground cable and clamp.

ID# R-3-012(w) Pictures here are old; will be updated soon reflecting its current condition7.5 HP, 220V, 3 Phase35-7/16" x 43-3/16" fixed tableSpindle tilts 5 to 45 degreesSpindle stroke 5-1/2"1-1/4" diameter spindle, 5-5/16 capacity under the nut(4) spinde speeds of 3,000, 4,500, 6,000 and 10,000 RPM; 16-17/32" maximum table insert diameterSpindle rev

Oliver 192 18" Band Saw, 115V, 1PH The gearbox was taken apart, 4 new shaft bearings, new oil in gearbox. Wheels may still need some adjustment / tires. Newer, nice Baldor motor.

Northfield #4 Industrial Table Saw Cleaned and Checked, Good Condition, Has been completely repainted Northfield and Biesemeyer colors. 5 HP 230V, 3 Ph SN: 79465-B With Biesemeyer Guard and Fence 18' Northfield #4 Table Saw 1" arbor Description: Its Cast iron and solid as a rock.

Tannewitz XJ - "Q" Table saw. Still in production at a one man shop, current owner bought saw COMPLETELY REBUILT from a dealer. The saw is still in great condition.

ID# W-157(w) Hot Melt Technologies Benchmark 525 Hot Melt Gluer with (2) 8ft lines and handguns The Benchmark 500 Series has set the standard for the high performance hot melt handgun systems used in production applications. With an exceptional cost/performance ratio, Benchmark 500 systems offer uncompromised durability, reliability and flexibility.

SIDA-6-597

This compact lathe is suitable for use at the workbench. It has a 1/6 hp, high torque, permanent magnet motor that is extremely quiet and smooth running. Comes with precision machined, A-TM-5 and A-TM-6 Tapered Spindles for holding buffs and wheels up to 4" in diameter.