125 hp motor for sale, brand-new and used.

unimount 125 motor 1735rpm 1/6 hp 3ph 230/460v syncrogear reducer 58/1 ratio

7 CU.FT. (200 Liter) DAY Nauta Processor Vacuum Dryer/Mixer. Sanitary Design Used approx.

USED GARDNER MODEL EBHSJC 50 HP ROTARY SCREW AIR COMPRESSOR. APPROXIMATELY 250 CFM @ 125 PSI. 3 PHASE, 60 CYCLE, 230/460 VOLT MOTOR.

WINDER - SPOOLER - TAKE-UP .5 HP BALDOR DC MOTOR SPOOL OD: 16" - 40" MAX. SPOOL WIDTH: 24" SPOOL ARBOR: 1.125" DIAMETER HEAVY-DUTY DIRECT TRAVERSE VARIABLE TORQUE THRU MAGNETIC CLUTCH UNIT ON LOCKING CASTERS 240/480/3/60 IN GOOD WORKING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS, WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whet

#3495 - MIXER, HIGH INTENSITY, 125 LITER CAPACITY, -MFG.: UNKNOWN, &nbs

Continuous paddle mixer, approx. 100 cu. ft.

SCMI MB-51 Horizontal and Vertical Boring Machine-Cleaned & Checked. Specifications: (57) Spindles, (3) heads with 2 HP motors each, combination vertical and horizontal boring. (1) One horizontal drilling unit with (1) 21 spindle head.

More woodshop machinery photos at this link: http://www.pleasantstmachinery.com/ Walker Turner Rockwell 20 inch drill press. This was the best design that Rockwell purchased , then cheapene their drill press quality. Benchtop only, no stand.

CMS 4216

ID# I-1-196(w)Cleaned and checked230 V, 3 Phase, 4 HP motor Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping & Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if

Powermatic / Houdaille brand Shaper Model TS110 HD Shaper with power feeder. Very Heavy Duty shaper from Houdaille in Italy when Powermatic was partnered with them. 1" spindle Dia.

ID# A-1-075 2001 Model YearSomarakis PumpLincoln Motor 150 HPJust over 2000 hours on this machine, excellent value!415/460 V, 3 Phase, 50/60 HzReady to ship Must ship flatbed freight due to value and length Email or call 1-800-793-4494 if interested in this machine.

ID# E-1-024a 5 HP feed motor, 440 V, 3 PH72" L x 98" W x 69" H62" capacity, 1-1/2" maximum part thicknessTop and bottom laminator with oil heated steel rollers14" diameter rollers with 1-1/2" wall thicknessVariable feed speed from 20-85 FPM(1) Heating system for the rollers up to 400FOil circulating pump at 1.5 HP; 1.5 HP hydraulic system for up to 900

ID# M-1-204(w) Some specifications need to be verified.Video of this machine running: https://www.youtube.com/watch?v=P8uF5Gz5MhA&feature=youtu.be 53" Wide Belt SanderCross belt, drum, electronic pad3-belt type1,300mm working lenght; 160mm max workpiece thickness2,650 x 1,315mm abrasive belt length

ID# P-1-064(w) 7.5 HP motor3200 RPMDouble Palm Buttons1997 Model Year Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping & Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs

ID# O-1-101(w) 1300mm crosscut capacity1500mm rip capacity5.5 HP main motor1 HP scoring motor Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed.

ID# O-1-202(w)Model 34-4501969, Tupelo Serial number EH-3206Cleaned and checked. Good running condition. Only unit as shown in picture is supplied.

ID# P-2-041(w) Mode X36AF, 1968 Model year 5 HP, 220V, 3 PhaseMachine is in the final stages of being Cleaned, checked, repaired and repainted as necessary. We left the original wood top on it, but could replace it for the full asking price. Good running condition.