12v Linear Actuator, Thomson, D12-21b5-12cf

US $225.00

  • Topeka, Kansas, United States
  • Feb 20th
Item # 1501007 Description: 12 volt linear actuator  Manufacturer: Thomson Model: D12-21B5-12CF Voltage: 12V DC Length of stroke: 12" Pin mounting hole size: 1/2" on motor end, 1/2" on rod end Length between pin mountings retracted: 21" Clutch: Yes Test results: Clutch slipped at 2100 lbs, tested at mid-stroke @ 13.5 volts, 65 degrees F.  Notes:  Additional Notes: I'm cleaning out the shop. These actuators were removed from service when the machines they were installed on, were replaced and scrapped. They are used and tested before listing here, and operated as described in the test results. There are no warranties or returns. They were all tested on an extension test rig, and measured in extension configuration only. Some of these actuators may or may not have a clutch configured in the retraction configuration. If you plan to use a specific actuator listed here in a retraction configuration, research the specifications of the model number to see if it is applicable. All were designed to run at 12 volts DC nominal, and were fused at 20 - 30 amps. All weigh between 11 - 15lbs. Please contact me if you have specific questions. Thank you. 
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Thomson
Country/Region of Manufacture United States
Model D12-21B5-12CF

Directions

Similar products from Linear Actuators & Bracket Stroke

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies