14316 for sale, brand-new and used.

Here is a nice old magneto charger made by the Joseph Weidenhoff Company. I hooked it up to a battery and tried it out. Its good to go.

Here is a nice old magneto charger made by the Midway Mechanical Co of St. Paul MN. I hooked it up to a battery and tried it out.

Here is a very nice Madison Kipp 30 for a IHC Mogul Side Shaft gas engine. This oiler in in perfect shape. It turn, ratchets, and pumps oil just as it should.

Here is a nice 5" diameter clutch pulley. I have never seen another clutch exactly like and as small as it is. I think it is in great shape and ready to use.

Here is a Wizard Type 3 low tension magneto. I am not sure what it fits and I cannot say I have seen another. It is pretty much ready to use but there is a very slight drag on the armature.

Here is a very nice original Accurate Type O Magneto. This mag is for a IHC Mogul Side Shaft or also a 10hp IHC M. Its in great shape.

Here is a nice low tension ignition coil. I don't think this coil is very old but it is and work just like an original This coil like all low tension coils is meant to be used with an igniter and will not fire a spark plug. It produces a good hot spark and is ready to use.

Here is a nice and very small low tension ignition coil that would be good to use with a model engine. This coil like all low tension coils is meant to be used with an igniter and will not fire a spark plug. It produces a good hot spark and is ready to use.

Here is a nice Thordarson steel body low tension ignition coil. This coil like all low tension coils is meant to be used with an igniter and will not fire a spark plug. It produces a good hot spark and is ready to use.

This is a push rod guide for a 2-1/2hp IHC Mogul Engine. This part is something that has been broken on many engines. Many are poorly repaired and make the engine look bad.

Here is an igniter for a Rawleigh Schryer or also possibly an Acme. It is in great shape but the moveable shaft support is broken off a little bit. From playing around with it and tripping it by hand I am confidant that work the way it is.

Here is a very nice Webster JY magneto. This magneto is in great shape with excellent spark. There is a just a little bit of cracking near the bearing in the one bearing plate.

Here is a very nice Fairbanks Morse Type R magneto. This mag will fit a variety of Fairbanks Morse engines. Someone has either rebuilt it or cleaned it up very nice.

Here is rebuilt Webster K magneto. This is a brass bodied mag. It is hot, and it is in great shape.

Here is rebuilt Webster K magneto. This is a brass bodied mag. It is hot, and it is in great shape.

Here is rebuilt Webster AMM magneto. It is painted gold just as it would have been originally. This is an aluminum bodied magneto.

Here is rebuilt and possible new Webster M magneto. I think it was made by Mark's Magneto Service. In the bottom of the case it is stamped MM 140.

Here is an odd K-W Model TG generator. It has a light bulb socket on either side of it. It seems to be in great shape.

Here is a very nice Wico EK magneto. These EK mags fit many different kinds of engines. This magneto will start and run your engine!

Here is a very nice Wico EK magneto. These EK mags fit many different kinds of engines. This magneto should start and run your engine!