Refrigeration Heat exchanger Copper 7.5 HP BH750 Refrigeration Research Unused This is an unused heat exchanger made by Refrigeration Research, model BH 750. Blue Ribbon series Particularly suited for suction cooled compressor applications. All copper construction 7.5 HP Overall length: 15in Shell OD: 2 in Liquid line opening: 5/8 inch Suction line opening: 1 5/8 inch Listed for use with R12, 22, 114, 500, 502, possibly others High side WP: 450 psi Low side WP: 200 psi Specifications: MFG: &nb
Century B381 Motor Dripproof Rigid Base Single Phase Non-Reversible-Connected for CW Facing End Opposite Shaft Energy Efficient 60 Hz 40 Degrees C Ambient Class B Insulated Manual Protector 2 SPL HP 3600 RPM 115/230 Volt 15.0/7.5 Full Load Amps
DESCRIPTION: For sale in new condition is a Gast Compressor/Vacuum Pump, item weights 6 pounds in a box. SPECIFICATIONS: Part # 22D1180-251-1002 Compressor/Vacuum Pump Compressor Type: Diaphragm HP: 1/8
This equipment was used in a clean, laboratory setting and was well-maintained. Lab is closing down, so the unit is no longer needed. Unit is fully functional.
Document Title: Gardner-Denver Electra-Screw Air Compressor Service Manual Number Of Pages: 41 Condition Of Original: Good Scan Type: Augmented Grayscale cover with Black & White Contents Scan Quality: Very Good Description: This is a reproduction of the 1981 manual covering service information for the Gardner-Denver Electra-Screw Base and Tank Mounted Air Compressors. 15 HP models BESD, EBEQD, and EBERD. 20 HP models BESE, EBEQE, and EBERE.
Document Title: Gardner-Denver Electra-Screw Air Compressor Parts Manual Number Of Pages: 31 Condition Of Original: Good Scan Type: Augmented Grayscale cover with Black & White Contents Scan Quality: Very Good Description: This is a reproduction of the 1981 manual covering parts information for the Gardner-Denver Electra-Screw Base and Tank Mounted Air Compressors. 15 HP models BESDA & B, EBEQD, and EBERD. 20 HP models BESEA & B, EBEQE, and EBERE.
Cast Iron Series.ZOELLER MODEL M98 BRAND NEW WITH 1 YEAR WARRANTY WITH NEW DATE CODE SO YOU CAN TAKE IT TO A LOCAL WARRANTY STATION FOR REPAIR OR REPLACEMENT. BEWARE OF PUMPS WITH A T IN THE MODEL # THEY ARE REFURBISHED AND BEING SOLD AS NEW, THE PUMPS WE SELL ARE NEW NOT!!! REFURBISHED.
10S Series - Submersible Sewage Pump Item Number: 511323 Model Number: 10SN-CIA-RFS The 10S Series submersible pump from Little Giant is specifically engineered to handle the tough, demanding tasks of effluent and sewage waste transfer with high efficiency and long term dependability. For use in residential, commercial, industrial and agricultural applications with light to medium transfer demands.
UP FOR SALE VACUUM PUMP , HERE ARE THE SPECS : Compressor Type Rotary Vane HP 3/4 Voltage 115/230 Hz 50/60 Phase 1 Full Load Amp s12.2/6.1 Inlet Size 3/8" NPT Outlet Size 3/8" NPT Free Air CFM @ 0 PSI10.00 Free Air CFM @ 10 PS
Drainosaur® Water Removal System Item Number: 506055 Model Number: WRS-6 Includes 5-gallon polypropylene tank. Tank lid has 1 1/2" FNPT (38.1mm) side intake port, 1 1/2" FNPT (38.1mm) top discharge port, and 2" FNPT (51mm) top vent port. Easy-to-remove filter trap.
This auction is for a complete turn-key Hurricane shutter cold roll forming manufacturing business. All equipment can be relocated. List of equipment included Roll Former 39” X 174” (motor sticks out an additional 18” wide) 3 openings to lift roll former, 3” X 5” .
New Arrival to KIG, Inc. in September is this 15 ton 2001 Air Cooled Chiller made by Affinity. This is an outdoor rated chiller (was actually run inside for a while), and has VFD drives for the fans, for low ambient year round outdoor process cooling capability.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
