151 8 for sale, brand-new and used.

Royal No. 3 Morse Taper Live Center (Inv.29566) Shows very light usage, if any. Changeable point center with extra bullnose 2 3/8" point Loc.

Dead Center w/No. 3 American Std. Taper 8 1/2 in., OAL Loc.

No. 3 Morse Taper Live Bullnose Center HSS 1.350 and 2.485 diam. GB-3 91-0220 808464-11-T-14 Loc.

Okuma Lathe Tool Holders (Inv.29409) 2 1/2" bore w/ 5/8" EA Holder Loc. 18-0 (Inv.29409) Not What You Were Looking For? Check out our eBay Store!

1/4 in. wide 3/8-16 threaded holes Base easily accommodates clamps Bottom is flat machined (1) block has some imperfection in the V - see Photo Loc. Insp.

Suburban Combination Sine Plate and Magnetic Chuck Fine Pole #MSP-66-FP 6" L x 6"W x 4 5/8" H IBM Surplus Loc. Metal Rack Aisle 1 (Inv. 27179)

Angle Plate 4 1/2 in. wide x 8 in. x 5 in.

Steel Lined Extended Height Vee Blocks (pair): Marked for 1-1/2 pipe. These blocks are made of machined aluminum with removeable steel wear plates mounted in the vee. There are integral 5/8 inch wide x 1/2 inch deep locating keys on the bottom.

Bemisine Adjustable Sine Plate 3-1/2 x 4 Inch: With a flat working height of 3-7/8 inches when plate surfaces are set parallel. Plate

Angle BlockAngle Block 5 x 6 x 10 25 lbs. (Inv.19478)(loc.328_O) Not What You Were Looking For? Check out our eBay Store!

Brown & Sharpe Magnetic Sine Cat. No. 927-50 6 x 6 in.

Pair of Taft-Peirce Universal Right Angle Irons (29617) Model No. 192 8 x 4-1/2 x 5 Inches overall Small base 1 Inch thick Large base 3/4 In

One Lot of 3 Index Plates 5 1/8" Diameter 1 1/4" Center Hold Diameter 1/4" Thick All holes are blind holes not through holes. 689, 300, 190 Hole Plates Plate 73, 77, 79, 83, 89, 91, 97, 100 Plate 31, 32, 33, 37, 39,41, 43, 44 Plate 17, 19, 21, 23, 25, 27, 28, 29

One Lot of 2 Index Plates 4 5/8" Diameter 63/64" Center Hole Diameter 15/64" Thick 309, 290 Hole Plates Plate: 22, 24, 27, 29, 37, 43, 49, 59 Plate: 23 25, 28, 31, 41, 47, 53, 61 Loc. 25-N (Inv. 27157)

(1) Set of 3 Chuck Jaws Jaw length 7 1/4 in. (2) bolt holes 3 in. on center 3/4 in.

(1) Set of Jergens Tongue and Groove Top Jaws #15270 3in. Bolt spacing 6 3/8 in. L x 3" w x 5 3/4 in.

Cushman 8" 4 Jaw Chuck for Southbend or other 2" Threaded Mount? (Inv.16947) (Loc. InspBench)

#5 Skinner Milling Vise 5 3/8 in. width No handle Opens 3 1/2 inches 41 lbs. (Inv.21062) Not What You Were Looking For?

O-Gon Tilt and Swivel Vise6 3/8 in. width Opens 4 3/8 in. Weight 94 lbs.

[ Pentek 156124-75 150 PSI 90 GPM 2 In Bottom Outlet Filter Housing