151 8 for sale, brand-new and used.

One Lot of 3 Index Plates 5 1/8" Diameter 1 1/4" Center Hold Diameter 1/4" Thick All holes are blind holes not through holes. 689, 300, 190 Hole Plates Plate 73, 77, 79, 83, 89, 91, 97, 100 Plate 31, 32, 33, 37, 39,41, 43, 44 Plate 17, 19, 21, 23, 25, 27, 28, 29

One Lot of 2 Index Plates 4 5/8" Diameter 63/64" Center Hole Diameter 15/64" Thick 309, 290 Hole Plates Plate: 22, 24, 27, 29, 37, 43, 49, 59 Plate: 23 25, 28, 31, 41, 47, 53, 61 Loc. 25-N (Inv. 27157)

Hartford Super-Spacers 8" Cover Plate: (Inv.2729, 8268-8271)

8 Inch Hartford Super Spacers Mask Plate: Your choice of ONE (1) plate. All plates in good used condition. You choose from the available Number of Indexes below: 2 Notch &n

8 Inch Hartford Super Spacers Mask Plate: Your choice of ONE (1) plate. All plates in good used condition. You choose from the available Number of Indexes below: 2 Notch &n

(1) Set of 3 Chuck Jaws Jaw length 7 1/4 in. (2) bolt holes 3 in. on center 3/4 in.

(1) Set of Jergens Tongue and Groove Top Jaws #15270 3in. Bolt spacing 6 3/8 in. L x 3" w x 5 3/4 in.

High Performance Machine Rotary Table (Inv.30888) Tilting 48 in. Power Rotary Table Model 360KR/105K48-C29-L-I-OCB-84005 S/N 552146 Giiddings & Lewis Customer New 11-90 Overall Dimensions 5'6" x 9'8" x 3 5/8" working height when horizontal (Inv.30888)

Cushman 8" 4 Jaw Chuck for Southbend or other 2" Threaded Mount? (Inv.16947) (Loc. InspBench)

Sip Type PD-5 Jig Bore Rotary Table 23 inch 23-5/8 inches Diameter, Very Smooth Operation. T-Slots at 45 Degree increments. High Precision for Jig bore accuracy.

Troyke CNC 12 Inch Tilting Rotary Table: With two sets of motors (No control) Model TIL12CNC1970 Lot No. 3847-9 8-3/4inch table height at 0 degrees elevation 2 inch center hole (8) t-slots 1015lbs mounted to table This unit was used for an inspection process. The original motors (the black ones) were replaced

Jones and Shipman Rotary Table 8 in, Pratt Burnerd Chuck with 2 1/8 in. through hole Jones and Shipmen Type S8413-009BR/1130 (Inv.25569) Email Not What You Were Looking For? Check out

Tsudakoma Rotary Table Model RNCV-401RB 15 3/4 in. table M/C No. 891423 Mounted on 7 5/8 in.

Bullard Cast Aluminum Table 8 Ft. 11 In. 5-3/4 inches thick table.

Bullard Cast Aluminum Table 8 Ft. 9 In. 12 inches thick two tiered table.

PRATT & WHITNEY 30 IN. ROTARY TABLE Pratt & Whitney 30 Inch Vertical Rotary Table: Working Surface Diameter 30 inch Maximum recommended weight of work, lbs. 1200 Height, base to center circle 19-1/8 inch Center hole in table, hardened and ground No.

Tsudacoma CNC Rotary Table 12-5/8" diameter W/8 T-Slots and 1-1/2 inch center hole. Machined for vertical or horizontal mounting. 8-3/4 inch table height when horizontal.

Faudi Paper Filtration Unit Type AFB 0.9/700 Zeich NR 8.973.5136 Werk NR 46933 Baujahe 1987 OA dimensions 36 x 80 x 41 in. (Inv. #17262)

#5 Skinner Milling Vise 5 3/8 in. width No handle Opens 3 1/2 inches 41 lbs. (Inv.21062) Not What You Were Looking For?

O-Gon Tilt and Swivel Vise6 3/8 in. width Opens 4 3/8 in. Weight 94 lbs.