1750 3 for sale, brand-new and used.

Inventory #: PUM1208 Type: Centrifugal Manufacturer: Bell & Gossett Voltage: 208-230/460 Inlet: 2" Outlet: 2" GPM: 60 Motor Mfg/Make: Bell & Gossett HP: .75 Model #: 60-14S Rated @ 30' head. 1750 RPM, 60 Hz, 2.4/1.5 amps, 3 phase.

BUYING 1 CARVER PUMP TYPE 1" x 1 1/4" INLET x 6 L-AV-0 , 1750 INPUT RPM , 1 HP RATING , ROTATION CCW FACING PUMP END , SERIAL # 112481 , MOTOR DATA IS 1 HP , 3 PH , 60 HZ , 143T FRAME , 230/460 VAC , 3.7/ 1.85 AMPS , 1740 RPM , 1.15 SF , ID # F-4432-00-450 , US ELECTRIC , WARRANTIED E-OK , IT IS MOUNTED ON A FACTORY SKID , THE UNIT APPEARS NEW BUT HAS BEEN SITTING FOR SOMETIME. 6078 ? Powered by eBay Turbo Lister The free listing tool.

has a 15 gallon tank max psi is 3800 has a general electric 3 HP induction motor PH 3 volts 208-220/240 cycles 50: rpm 1455 amp 10.8/5.4 deg c rise 50 service factor 1 cycles 60: rpm 1750 amp 9/4.5 deg c rise 40 service factor 1.15

You are bidding on ( 1 ) new Parker TC00653F720AAAA, LSHT Tow & Recovery Hydraulic Motor P/N TC00653F720AAAA Series - TC Displacement - 4.0 cu in Mounting - SAE "A", 2 bolt Shaft - 1" Keyed Rotation - Standard Ports - 3/4"-16 SAE O-Ring Max Speed 517 rpm (cont) Max Flow 9 gpm (cont) / 9 gpm (interm) Max Torque 582 lb-in (cont) / 810 lb-in (interm) Max Differential Pressure 1250 psi (cont) / 1750 psi (interm) Max Supply Pressure 1950 psi Mas HP 6.5 Made in USA FREE SHIPPING in the USA only.

Here’s a Parker Vickers, 3 Circuit, 5 HP, 7 GPM, 30 gal Hydraulic Power Unit / Pump / Solenoid Valve, 2000+ p.s.i. Peabody Galion Compactor surplus unit; 3 separate forward / reverse control circuits! Recently removed from service - tested & guaranteed (see pics.) - Well equipped unit...

Payment Policy Brand New Sony CyberShot 8 MP Di

48” x 10’ Long Stainless Food Grade Incline Conveyor with SS Belt Mfg by CHS 48" SS Food Grade Belting - Heavy Duty Incline Conveyor 8" SS sides above belt 57" Infeed Elevation 62" Discharge Elevation SS frame construction SS Drip pan SS Top cover for over conveyor belt - removable 1 hp / 1750 rpm drive with gearbox reduction Electrical 230/460 Volt / 60 Hz / 3 Phase Just Removed from production EXCELLENT Condition !!

36" Wide x 7' Long SS Incline Conveyor White Food Grade Plastic Belt, Conveying SS Wash Down Motor SS legs included - Removed for shipping purposes 36” wide White Food Grade Plastic Belting 40" infeed elevation 48” discharge elevation SS Wash Down Motor 2 HP / 1750 rpm Electrical 208/230/460 volt / 60 hz / 3 phaseRemoved from a Major Food Plant Excellent Condition !!

Accumulation Table, SS Conveyor, 40” x 106" Long, Sorting Packing Conveyorwith Speed controller Can also be used as a feed or pack table 40" wide x 106" long + 24" additional infeed lane (3) 12" wide belt (1) 3.25" wide belt SS Construction Rexnord Plastic belt Side rails - adjustable Adjustable leg levelers SS legs Casters for easy mobility 36” Elevation 1/2 HP / 1750 rpm drive Dart speed controller Electrical 115 Volt / 60 Hz / 1 Phase

Hytrol 24” x 25’ Long Powered Incline Case Conveyor Serial #488667 24” wide grip-rite black belt 28” wide frame 20’ Incline Length with 5' Long Infeed Conveyor 40" Infeed elevation (adjustable legs) 110" Discharge elevation (adjustable legs) 1 Hp / 1750 rpm drive Electrical 230/460 Volt / 60 Hz / 3 Phase Just removed from productionExcellent Condition !!

12” W x 16’ Long SS Incline Conveyor with White Food Grade Belting SS FrameSS Legs - Discharge legs removed for shipping purposes, but included 12" White Rubber Food Grade Belt 30" infeed elevation 52" discharge elevation - can be modified 2 Hp / 1750 RPM Baldor driveElectrical 208/230/460 Volt / 60 Hz / 3 Phase Removed from a Major Food PlantExcellent Condition !!

42” W x 10' Long SS Conveyor with SS Wire Mesh Food Grade Belt SS Frame construction SS Legs with level adjusters 42" SS Wire Belt 10' Overall length 40" elevation – adjustableSS Drip Pan with drain1 Hp / 1750 rpm drive (Center drive) Electrical 208/230/460 Volt / 60 Hz / 3 PhaseJust Removed from a Major Food PlantVery Good Condition !!

20" x 21' Long Incline Case / Box Conveyor Just removed from production 18” wide grip-rite black belt 20” wide frame 21’ Overall length with nose over area 1 Hp / 1750 rpm drive Electrical 230/460 Volt / 60 Hz / 3 Phase Last suspended from celing Excellent Condition !!

NEVER USED 16" Powered Case Metering Conveyor, Mfg by Integrated Mfg by Integrated Conveyor Systems Serial #1011861 16" Powered Case Conveyor (2) 48" Metering Belts - 16" BF - 12" Belt 1 Hp / 1750 rpm Tigear Drive 25:1 Gearbox reduction 110" Overall Length Electrical 208/230/460 Volt / 60 Hz / 3 phase NEVER USED / LIKE NEW CONDITION !!