176 4 for sale, brand-new and used.

The Informant® 2 leak detector allows pinpoint detection of both refrigerant and combustible gas leaks with the same instrument.

Pipe Clamp K-type Thermocouple NEW IN PACKAGE! Max: 257?F (125°C) Description The ATC1/KTC1, K-type, pipe clamp thermocouples, can be used to take temperatures of pipes or any other cylindrical surface within their jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or sub-cooling measurements.

The ATC2, K-type, pipe clamp thermocouple is used to take temperatures of medium to large pipes or any other cylindrical surface within its 3/8-Inch to 2 1/4-Inch jaw range. Using a pipe clamp thermocouple greatly facilitates taking superheat or sub cooling measurements. Use the ATC2 for most A/C units.

The ATWB1, K-type wet bulb thermocouple can clip to HVAC/R equipment for convenient placement and hands free testing. Wet the durable sock and clip to evaporator filters for indoor wet bulb – great for finding target evaporator exit temperature. Clip to return vents for indoor wet bulb temperature – great for target superheat calculations.

NEW CARRIER MODEL NO: 38QRR060---35 TON, OUTDOOR MOUNTED, AIR COOLED,SPLIT SYSTEM HEAT PUMP CONDENSING UNIT,PURON REFRIGERANT, 208/230 VOLT, 1 PHASE, 60 HERTZ This Carrier unit is packaged for shipping and ready for pickup. 38QRRPerformance Series Heat Pumpwith Puron Refrigerant1---1/2 to 5 Nominal Tons The Environmentally Sound RefrigerantCarrier Heat Pumps with Puron refrigerant provide a collectionof features unmat

Fieldpiece K-Type Thermocouple bundle - NEW! Consists of: 1 piece ATA1 K-type thermocouple with alligator clip 1 piece ATWB1 K-type wet bulb thermocouple with alligator clip ATA1 description: The ATA1, K-type thermocouple can clip to HVACR equipment for convenient placement and hands free testing. Clip to condenser fins for accurate outdoor dry bulb measurement – great for finding target s

LINCOLN CENTRO-MATIC SL-32 GREASE INJECTORS ~NEW~SURPLUS~ (6) P/N: 83336-3 Item Name: Grease Injector Manufacturer: Lincoln IndustrialSeries: SL-32# of Outlets: 3

T605 150 PSI Red Petroleum Suction Hose Applications: For suction and discharge applications in truck and tank car transfer of gasoline, oil and other petroleum-based products with up to 50% aromatic content. Cover:

Alfagomma T 130 Steel Air Hose 2" 150 PSI 45' Not sure if this is new old stock or if it has been used. Here is some info on the hose from another site, I guess it is the same hose, but there is no 'AK' on this hose like the one on the page I'm getting the info from, so, maybe this hose it a bit different? (it looks: T-130 AK COMPRESSED AIR 40 BAR (600 PSI) - STEEL REINFORCED

YOU ARE BIDDING ON A LOT OF 4 HYDRAULIC FITTINGS I.D. # 176, WEATHERHEAD PART # 04U-506 WATCH FOR MORE FITTINGS TO FOLLOW

O RINGS/PACKING - MISCELLANEOUS APPROX. QUANTITY - 6,800 PCS. The count may be slightly off on the larger quantities due to human error but the total count should be very close.

PCIS Is proud to offer This kit which contains 382 O-Rings in the 30 most popular sizes, providing an extremely low cost per size value. O-Rings conform dimensionally to AS568 universal series. This set comes with a plastic storage case for easy organization.

25"W x 176"L Sanitary Blue Belt Conveyor Stainless Steel 36" belt height 2"H SS siderails Allen Bradley Powerflex 4 speed controller 1 hp 208-230/460 volt 1725 rpm 30:1 ratio OAD's: 38"W x 176"L x 38"H Unit just removed from service and is in excellent working condition. Last used in the food industry.

MTC 2 TON MOBILE A FRAME GANTRY CRANE COFFING 2 TON POWER TROLLEY HOIST 460 VOLTS 3 PHASE 121" FLOOR TO BOTTOM OF BEAM 131" OVERALL HEIGHT 168" BETWEEN UP RIGHTS CASTERS BOLTED ON 10" BEAM 176" OUTSIDE TO OUTSIDE 67" LEG BASE SELLER WILL DISASSEMBLE AND PUT ON LARGE SKID AT NO COST TO BUYER

Gripple no. 4 10 foot loop -fast safe working load at 5:1 176 to 495 pounds