+ Post new Ad
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 0
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 1
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 2
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 3
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 4
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 5
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 6
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 0
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 1
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 2
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 3
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 4
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 5
1996 Haas VF-3 w/ 4 Axis Drive, US $32,000.00 – Picture 6

1996 Haas Vf-3 W/ 4 Axis Drive

US $32,000.00

  • Ellicott City, Maryland, United States
  • Jan 30th
Open on mobile:
QR code
1996 Haas VF-3   Specifications: Table Size: 48" x 18" X-Axis Travel: 40" Y-Axis Travel: 20" Z-Axis Travel: 25" Spindle motor........15 HP Spindle speed....... 10,000 RPM Spindle taper........ CAT 40 Too positions........ 20 ATC EQUIPPED WITH: 2-Speed Gearbox 4th Axis Prewired Rigid Tapping User Definable Macros Coordinate Rotation and Scaling Spindle Orientation Haas Quickcode Programming Custom Macros Chip Auger RS-232, USB, Ethernet (3.5 Floppy Available) Programmable Coolant Nozzle Marposs Tooling and Work Probing 1MB Expanded Memory *Excellent condition,  **3471 Spindle hours  ***Tooling Included (ER Collet Holders, ER Collets, Tool Holders, etc.)  Can be inspected under power. To inquire, call us at: 410-465-6396
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Good condition, ready to make chips!”

Directions

Similar products from Tools for Milling Machines

"Detroit" Bussey Indexing Dividing Head & Tail Stock Set Machinist Tool Set

"Detroit" Bussey Indexing Dividing Head & Tail Stock Set Machinist Tool Set

  • Royal Oak, Michigan, United States
  • Jan 30th
BRIDGEPORT VERTICAL MILLING MACHINE, 9 inch X 32" 1 HP Chrome ways Many extras

BRIDGEPORT VERTICAL MILLING MACHINE, 9 inch X 32" 1 HP Chrome ways Many extras

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Bridgeport Mill

Bridgeport Mill

  • Baldwin Park, California, United States
  • Jan 30th
Whirlygig SuperTramp Clamp Locking Indexing Dividing Head Machinist Tool

Whirlygig SuperTramp Clamp Locking Indexing Dividing Head Machinist Tool

  • Royal Oak, Michigan, United States
  • Jan 30th
NEW ATLAS MILLING MACHINE M1-251B BACKGEAR ECCENTRIC KNOB ASSEMBLY USA MADE NEW

NEW ATLAS MILLING MACHINE M1-251B BACKGEAR ECCENTRIC KNOB ASSEMBLY USA MADE NEW

  • Niles, Michigan, United States
  • Jan 30th
Unimat milling table NIB

Unimat milling table NIB

  • Newton, Kansas, United States
  • Jan 30th
HORIZONTAL MILLING ARBOR 1" DIAMETER 14-1/4" LONG NMTB40 SHANK

HORIZONTAL MILLING ARBOR 1" DIAMETER 14-1/4" LONG NMTB40 SHANK

  • San Diego, California, United States
  • Jan 30th
ITI HORIZONTAL MILLING ARBOR 2" DIAMETER 20-1/2" LONG NMTB30 SHANK

ITI HORIZONTAL MILLING ARBOR 2" DIAMETER 20-1/2" LONG NMTB30 SHANK

  • San Diego, California, United States
  • Jan 30th
BRIDGEPORT 1-1/2 HP VARIABLE SPEED RAM TYPE VERTICAL MILL

BRIDGEPORT 1-1/2 HP VARIABLE SPEED RAM TYPE VERTICAL MILL

  • Chicago, Illinois, United States
  • Jan 30th
ACRA Milling Machine

ACRA Milling Machine

  • Chicago, Illinois, United States
  • Jan 30th
MEGAMILL 2" Milling Head marked MIF-64900475

MEGAMILL 2" Milling Head marked MIF-64900475

  • Lake Village, Indiana, United States
  • Jan 30th
1" SHANK X 1" DIA. CARBIDE INSERT END MILL cutting tool holder milling cutter

1" SHANK X 1" DIA. CARBIDE INSERT END MILL cutting tool holder milling cutter

  • Milroy, Indiana, United States
  • Jan 30th
FF FW D3.00-1.25-09-C ISCAR Indexable Cutter

FF FW D3.00-1.25-09-C ISCAR Indexable Cutter

  • Windsor, Connecticut, United States
  • Jan 30th
NICE LOT OF 6 HSS MILLING CUTTER 3" TO 6" CLEVELAND

NICE LOT OF 6 HSS MILLING CUTTER 3" TO 6" CLEVELAND

  • Ellington, New York, United States
  • Jan 30th
NICE PAIR OF HSS MICH TOOL HOBBING MILLING CUTTERS 4" WITH 2" BORE

NICE PAIR OF HSS MICH TOOL HOBBING MILLING CUTTERS 4" WITH 2" BORE

  • Ellington, New York, United States
  • Jan 30th
NICE LOT OF 11 HSS MILLING CUTTERS WITH 1" BORE NIAGARA

NICE LOT OF 11 HSS MILLING CUTTERS WITH 1" BORE NIAGARA

  • Ellington, New York, United States
  • Jan 30th
NICE LOT OF 6 HSS STAGGERED TOOTH MILLING CUTTERS 3" WITH 1" BORE MOON

NICE LOT OF 6 HSS STAGGERED TOOTH MILLING CUTTERS 3" WITH 1" BORE MOON

  • Ellington, New York, United States
  • Jan 30th
PAIR OF DEVLIEG MICRO BORING HEAD TOOL HOLDERS W/ 40FC FLASH CHANGE SHANKS

PAIR OF DEVLIEG MICRO BORING HEAD TOOL HOLDERS W/ 40FC FLASH CHANGE SHANKS

  • Ellington, New York, United States
  • Jan 30th
LOT OF 4 DEVLIEG TOOL HOLDERS W/ 40FC FLASH CHANGE SHANKS 2MT B&S END MILL

LOT OF 4 DEVLIEG TOOL HOLDERS W/ 40FC FLASH CHANGE SHANKS 2MT B&S END MILL

  • Ellington, New York, United States
  • Jan 30th
LOT OF 3DEVLIEG MICROBORE & FACING & BORING HEADS W/ 40FC FLASH CHANGE SHANKS

LOT OF 3DEVLIEG MICROBORE & FACING & BORING HEADS W/ 40FC FLASH CHANGE SHANKS

  • Ellington, New York, United States
  • Jan 30th

People who viewed this item also vieved

SECO INDEXABLE DRILL 1" SHANK 5.25" OAL SD50 0787 157 1000R (LOC1256B)

SECO INDEXABLE DRILL 1" SHANK 5.25" OAL SD50 0787 157 1000R (LOC1256B)

  • Laingsburg, Michigan, United States
  • Jan 30th
SECO INDEXABLE DRILL 1" SHANK 4.75" OAL SD52 17 34 25R7 (LOC1256B)

SECO INDEXABLE DRILL 1" SHANK 4.75" OAL SD52 17 34 25R7 (LOC1256B)

  • Laingsburg, Michigan, United States
  • Jan 30th
SANDVIK HSK 100 40MM FACE MILL ARBOR 302.41005 100 40 060 A (LOC1260A)

SANDVIK HSK 100 40MM FACE MILL ARBOR 302.41005 100 40 060 A (LOC1260A)

  • Laingsburg, Michigan, United States
  • Jan 30th
Hossfeld bender dies

Hossfeld bender dies

  • Salem, Ohio, United States
  • Jan 30th
NICE SET OF 36 HSS SCHMIDT LETTERS AND NUMBER STAMPS 3/16"

NICE SET OF 36 HSS SCHMIDT LETTERS AND NUMBER STAMPS 3/16"

  • Ellington, New York, United States
  • Jan 30th
NICE SET OF 36 HSS SCHMIDT LETTER AND NUMBER STAMPS 5/32"

NICE SET OF 36 HSS SCHMIDT LETTER AND NUMBER STAMPS 5/32"

  • Ellington, New York, United States
  • Jan 30th
BATES Diamond Hone Stone BL10-D181-2 JN1116101 .308L STD/100 Rough <1926>

BATES Diamond Hone Stone BL10-D181-2 JN1116101 .308L STD/100 Rough <1926>

  • Saint Louis, Missouri, United States
  • Jan 30th
Sunnen Hone MBB-1660E-J1C

Sunnen Hone MBB-1660E-J1C

  • Buffalo, New York, United States
  • Jan 30th
Sunnen Honing Machine MBB-1600-MS w/ Oil Filter System PF-150-MS -PICK UP ONLY

Sunnen Honing Machine MBB-1600-MS w/ Oil Filter System PF-150-MS -PICK UP ONLY

  • Victorville, California, United States
  • Jan 30th
DCM Rotary Surface grinder

DCM Rotary Surface grinder

  • Chesapeake City, Maryland, United States
  • Jan 30th
Precise electric Jig grinder

Precise electric Jig grinder

  • Brooklyn, Michigan, United States
  • Jan 30th
Tormek Supergrind 2000

Tormek Supergrind 2000

  • Charlotte, North Carolina, United States
  • Jan 30th
GENUINE ALORIS BXA TOOL POST &amp; HOLDERS Lathe Swings 10&#034;-15&#034; BX 1, 2, 4, 6

GENUINE ALORIS BXA TOOL POST & HOLDERS Lathe Swings 10"-15" BX 1, 2, 4, 6

  • Hopkins, Minnesota, United States
  • Jan 30th
Dumore 3/4 HP Tool Post Grinder 9&#034; to 20&#034; Swing, 120V, Dumore 5X Spindle, Lathe

Dumore 3/4 HP Tool Post Grinder 9" to 20" Swing, 120V, Dumore 5X Spindle, Lathe

  • Hopkins, Minnesota, United States
  • Jan 30th
CLEAN Dumore 1/2 HP Tool Post Grinder 57-021 with Dumore Spindle 120V, Lathe

CLEAN Dumore 1/2 HP Tool Post Grinder 57-021 with Dumore Spindle 120V, Lathe

  • Hopkins, Minnesota, United States
  • Jan 30th
DYNA MYTE DM2800 3 Axis CNC Milling Machine

DYNA MYTE DM2800 3 Axis CNC Milling Machine

  • Las Vegas, Nevada, United States
  • Jan 30th
DOUBLE ANGLE PLATE, HARDENED/GROUND,4x4x3

DOUBLE ANGLE PLATE, HARDENED/GROUND,4x4x3

  • Overland Park, Kansas, United States
  • Jan 30th
Vintage Starrett No. 199 15&#034; Master Precision Level In Dovetail Wooden Tool Box

Vintage Starrett No. 199 15" Master Precision Level In Dovetail Wooden Tool Box

  • Hillsdale, Indiana, United States
  • Jan 30th
DAVENPORT FEED SLIDE ROLLER GUIDE FOR BAR LOADER P/N #5015

DAVENPORT FEED SLIDE ROLLER GUIDE FOR BAR LOADER P/N #5015

  • Churchville, New York, United States
  • Feb 16th
ESCOMATIC FEED ROLL NUTS 14mm x 1mm Screw Machine

ESCOMATIC FEED ROLL NUTS 14mm x 1mm Screw Machine

  • Lindenhurst, New York, United States
  • Feb 16th
GEOMETRIC 1&#034; DS DIE HEAD, 1&#034; SHANK

GEOMETRIC 1" DS DIE HEAD, 1" SHANK

  • Fox Lake, Illinois, United States
  • Feb 16th
Xermac ERM EDM Manual Sinker

Xermac ERM EDM Manual Sinker

  • Roseville, Michigan, United States
  • Feb 24th
Hightech Zwire 0.30mm Gamma Coated EDM Wire 900NT

Hightech Zwire 0.30mm Gamma Coated EDM Wire 900NT

  • Kansas City, Missouri, United States
  • Feb 24th
HEAD A CHARMILLES 100 200 WIRE EDM Wire Robofil 290 310 4312150 4312140 430972

HEAD A CHARMILLES 100 200 WIRE EDM Wire Robofil 290 310 4312150 4312140 430972

  • Anoka, Minnesota, United States
  • Feb 24th
NEW DOALL 14&#034; x 18&#034; TILT FRAME VERTICAL BAND SAW MODEL TF-1418

NEW DOALL 14" x 18" TILT FRAME VERTICAL BAND SAW MODEL TF-1418

  • Huntington Park, California, United States
  • Mar 25th
Drake Bandsaw V16

Drake Bandsaw V16

  • Hillsboro, Missouri, United States
  • Mar 25th
New Doall Upper Saw Guide Assembly with 1/4&#034; Blade Guides

New Doall Upper Saw Guide Assembly with 1/4" Blade Guides

  • Claremont, California, United States
  • Mar 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies