2 1 4 pipe for sale, brand-new and used.

NEW Easy Heat AHB-140 40-Foot Easyheat Braided Heat Tape

Mainline Brand 4” Standard Pneumatic Rubber Test Plug Item# ML10474 FEATURES: Used for testing pipelines or to temporarily stop their flow Sizes range from 1-1/4" to 6" (Plug listed is for 4", see chart below)! Suitable fo

Blue 1/2", 3/4", 1" for COLD water pipeProtects copper and plastic in concrete pour200ft roll

Red 1/2", 3/4", 1" for HOT water pipeProtects copper and plastic in concrete pour.200ft roll

NEW Easy Heat AHB-124 24-Foot Braided Heat Tape

NEW Easy Heat AHB-112 12-Foot Easyheat Braided Heat Tape

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

100 Pc 1/2 x 520" Thread Sealing Tape

4" Diameter copper pipe "Type L" x (one foot length) Standard Domestic Water Pipe 4.125" OD 3.905" ID avg. .110 Wall up to 5 foot lengths (shipping varies on lengths over 5 foot) to order: enter qu.1=1foot length, 2= 2foot length etc. See other items from this seller

Clear Acrylic Pipe by the foot Outer Diameter - 2" ( 50mm) Inner Diameter 1 3/4" ( 43 mm) Wall thickness - 3 mm Crystal Clear absolutely transparent , seamless, new pipe, comes with protective film to avoid scratches. It is not pressure or temperature rated. Cuts easy with disc saw You are buying it by the ft .

x3 - Spears 848 Series PVC Pipe Fitting, Caps, Schedule 80, 1" NPT FemaleNew with TagsTotal of 3 caps Cap for closing the end of a pipe or fitting Female NPT threads for connecting

ROBBINS PIPE BONDING CLAMP MODEL 63 C / 64 D (includes everything shown in photo) HIGH ADJUSTABLE (roughly 1.75” when fully closed and more than 5” fully open”

We have 4 (four) lengths of Schedule 40 and 10 (ten) lengths of Schedule 80 3" CPVC pipe from a job we recently completed. They are about 15-1/2" long each, Some have both ends flat from our saw cut, some have one factory beveled end and one saw cut end. There are no cracks on any of the pieces.

We have dozens of lengths of 4" CPVC Schedule 80 pipe from a job we recently completed. They are about 19-1/2" long each, some have both ends are flat from our saw cut, some have one factory beveled end and one saw cut end. There are no cracks on any of the pieces.

2" Copper Pipe -NEW- Hard Drawn Type L- By The foot Description: Pipe is sold by the foot. If you want 3 feet then order a quantity of "3". If you need a 1 ft and a 3 ft section, order a 4 ft section, let us know and we can cut it and combine shipping cost.