2 1 4 u bolt for sale, brand-new and used.

Utility and Pole Line Parallel Clamps. These clamps are also used in lightening rob and wire installations for lightening protection (especially the brass parallel grove con - Clamps for splicing together two electrical wires. These are the kind of clamps used on the outside of old houses to hook up electric lines to the house or are used to splice lightening rod grounding wires.

Anchor Fluid Power Steel Flange - Part W44-32-32U This item is Brand New. Steel flanges pressure rated per SAE J518 Code 61 in all sizes. Connects dry­seal NPTF threads to standard SAE 4-bolt pads on pumps, motors, valves and other components.

1/2” WIRE ROPE CLIP (FORGED). Meet specification FF-C-450 Type 1, Class 1. Insure Proper Number of clips used per industry specifications.

Here's 5 unopened u bolt kits. 2 1/2" across. I think the bolts are 1/4" or the next size up.

This clamp pivots in the middle to hold a variety of different pipe configurations. It can hold up to a 2" pipe on the small side and a 4 1/2" pipe on the larger side. It only says "Japan" on it; no other identification.

Zinc plated 1/4" u bolt, measures 2" wide and 3 1/2" long, comes with plate and nuts. Not to be used for supporting human weight or use on athletic or playground equipment or overhead load lifting.

 

5/16 inch diameter by Nom. 1 inch length standard USS coarse thread, 135 each. These will be shipped to you from pristine unopened US Military containers; including Master Cases, Inner cases, and Inner packs.

Thread 1/2-13 Between inside threads -- 5.63 inches Length - 7,81 inch Suncor Equilavent -- S0352-13125 Have 10 available

Genuine U.S. Military Issue Surplus    Inconel (?) Non-Magnetic Bolt   We are not positive that this bolt is made of Inconel. On the head of the bolt it has "IN   718".

LOT OF 25 U-BOLTS 1/4 "-20 WITH 1" INSIDE DIAMETER INSIDE LENGTH: 3-1/4" WITH THREAD LEANGTH OF 2-1/4 LOOSE SURPLUS STOCK-NO BOX

LOT OF 10 U-BOLTS 3/8 "-16 FOR 2" PIPE INSIDE LENGTH: 4-1/2" WITH THREAD LEANGTH OF 2-1/2" INSIDE WIDTH 2-7/16"

Large long D-stainless steel U bolt. Inside length is 5/3/4. Thread 1/2X13.

4) New, M12, 12mm-1.75 x 75mm, Galvanized Carriage Bolts. With Galvanized Flat & Lock washers plus nut. This is a set of 4, 12mm galvanized metric carriage bots with washers and nut.

You are purchasing 10 serrated flange bolts that are 1/2 inch diameter with 13 threads per inch. The thread length is 1 inch. The overall length of the bolt to include the hex head is 1 1/2 inches.

nsa3m81804

Genuine U.S. Military Issue Surplus   Metal Hanger Clamp with Stainless Steel Bolt Assembly 1 7/8" Inner Diameter 2 1/4" Outer Diameter x 11/16" Wide There is a 5/8" Length x 1/4" width slot one end. (See Picture) The overall length is 4 5/8" The hanger clamp is made of magnetic steel.

Genuine U.S. Military Issue Surplus   Lot of 2 - Raytheon  Tee Head Stainless Steel Bolts P/N: 4023519-0001 NSN: 5306-00-846-1088  Characteristics Thread Class: 2A Thread Direction: Right-hand Thread Length:   0.750 inches minimum and 0.780 inches maximum Fastener Length: 1.471 inches minimum and 1.501 inches maximum Head Style:     Tee no.

SQUARE U-BOLT Electro Galvanized It's New and Includes Two 1/2" Hex Nuts, Two Spring Washers and Two Flat Washers