2 1/2 fire hose for sale, brand-new and used.

Hello, Up for auction here we have: Lot of 6- Vintage brass 2 1/2" fire hose connector ends. These items show scratches, scuffs, and patina. Items will come exactly as pictured.

65MM (2-1/2" x 50') Fire Hose. - UL listed - Conforming to IS 636 Type A - ISI marked - Rubberized fabric reinforced rubber lined (RRL) Fire Hose - Jacket is made up of 100% Synthetic Yarn for Extra strength - RRL alone can with stand 100 PSI pressure - Heat and Abrasion resistance 1 year warranty, Factory Authorized International Distributor Sizes Working Pressure PSI Burst Pressure PSI &nbs

WHITE PIN RACK FIRE HOSE SINGLE JACKET ID 1-1/2” 75 FT. L 250 PSI NST Condition: New, unopened and undamaged Type: Single jacket pin rack Material: Polyester

We found this stored above the bathroom in a building we were emptying. In a dusty but sealed box. I opened it and set it out on the packing table to photograph.

You are buying a NEW, UNUSED, OPENED ITEM JUST FOR PICTURES.1 1/2 FIRE HOSE WITH RACK. READY FOR INSTALL. COMES WITH EVERYTHING IN PICTURE.

2 1/2 " Fire Hose/Hydrant Gate Valve Polished Chrome Plated Female NPT x Male NST with Polished Chrome Cap with Chain Used on dry systems as fire hose outlet connections and on pump test manifolds Solid wedge disc with tapered seats Chrome Plated on

2 1/2 " Fire Hose/Hydrant Gate Valve Polished Chrome Plated Female NPT x Male NST with Polished Chrome Cap with Chain Used on dry systems as fire hose outlet connections and on pump test manifolds Solid wedge disc with tapered seats Chrome Plated on

100 Pound Wheeled Carbon Dioxide Extinguisher UL Rating: 20B / C Amerex 334

The ultimate hard wearing, hard performer, our Rubber Covered Fire Hose is the choice of professionals nationwide. That's because its abrasion-resistant, heat-free nitrite synthetic one-piece cover and liner is impervious to water,oil,gas and most chemicals. It has a proof test pressure of 500psi and a service test of 250 psi.

(13) 2-1/2" x 50 foot Made in USA Service test to 300 psi Pressure proof tested to 600 psi (13) 2-1/2 inch x 50 foot: .... (6) Snap-Tite 2-1/2" x 50' Dura Light, rubber fire hose .... Color: yellow.

[ Elkhart Brass J 2-1/2 In 500 gpm 100 psi Brass Fire Hose Nozzle

The “Powhatan” Model 18-157-50000, Angle Hose Valves are designed for use in piping systems where it is necessary to access the system for a fire hose connection. Typical applications are in fire department connections, gravity and pressure tank connections, and public water supplies to sprinkler and standpipe systems. 2 1/2 " (63.5 mm) Valve.

for sale pistol grip TFT Quadra Fog fire hose nozzle with 1.5" NH NST NS National Standard Fire Hose Thread inlet and shutoff. Task Force Tips Model # FQS125. Didn't leak at 80 psi and made a perfectly straight stream like a pipe.

(4) 50 ft fire hose 1 1/2 inch.Came from renovation,Unused but dusty.

Please ask any questions before buying, as I do not know much about this item. Looks unused, taken directly off of job site to sell. Looks like 100 feet of hose included.

for sale Akron turbojet fire hose nozzle with 1.5" NH NST NS National Standard Fire Hose Thread (38mm) inlet and shutoff. Model # style 1722. Adjusts perfectly from wide fog to straight stream.

2 1/2 " Straight Pattern Brass Gate Valve with non-rising stem and swivel inlet. For use on hydrants, standpipes and fire pumps up to 300 lbs (2070 kPa) applications. Female Swivel NST x Male NST Valve is made up of a Brass body and Brass trim Red speed handle and pin lug swivel on the inlet and male hose thread on the outlet.

2 1/2 " Hose/Hydrant Gate Valve - Female x Male Used on dry systems as fire hose outlet connections and on pump test manifolds Solid wedge disc with tapered seats Cast brass, 300 PSI UL listed and FM approved Gate valve, 2 1/2" Female NST Hose thread inlet x 2 1/2" Male NST hose thread outlet

2 1/2 " Hose Gate Valve - Female x Male Used on dry systems as fire hose outlet connections and on pump test manifolds Solid wedge disc with tapered seats Cast brass, 300 PSI UL listed and FM approved Hose valve, 2 1/2" Female NPT inlet x 2 1/2" Male hose thread outlet