US $30.99
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Material | Carbide |
| Cutting Diameter | 2.5mm | ||
| Coating | AlTiN/TiAIN | ||
| Overall Length | 50mm | ||
| End Type | Flat | ||
| Country/Region of Manufacture | China | ||
| Model | HRC55 Series | ||
| Center Cutting | Yes | ||
| MPN | N/a | ||
| Flute Length | 6mm | ||
| Flutes | 2-Flute |
Directions
Similar products from End Mills Router & Drill Bits
GW Morse Tools Co. 'End Mill...3/4" shank'...4-Flutes No.1897..in case!
ABER Wodrauf Keyseat Cutter ? 3/4 X 1/8 1/2 Shank Loc: J1-3
REGAL-BELOIT T-Slot Cutter for 3/8 Bolt 25/32 X 21/64 Loc: J1-2
KEO Keyseat Cutter 1 X 3/16 1/2 Shank Loc: J1-3
DoALL T-Slot Cutter for 1/2 Bolt 31/32 X 3/8 Loc: J1-1-1
8MM X 66MM, 4-FLUTE, HSS, HIGH COBALT %, FLAT, CENTER CUTTING, ENDMILL, 5x
CNC Machinist = 2 pack HSS 3/4" End Mill = BRAND NEW Auction
5/8" X 5/8" X 1" x 4 1/2" End Mill Double End 2 Flutes OSG 52221
ASSORTMENT OF 40 NEW AND USED MILL ENDS (NO RESERVE)
FULLERTON DURA-CARB 39206 3/16X5/8X2 LIST 3700 SQUARE END **NEW**
FULLERTON DURA CARB ENDMILL 39208 * 1/4X3/4X2-1/2 **NEW**
FULLERTON DURA CARB END MILL 39210TIN * 5/16X13/16X2-1/2 **NEW**
CLEVELAND TWIST C41171 #598 3/4X3/4X1-5/8 4 FLT H8 ENDMILL TIALN**NEW**
1" X 1" X 2" X 4 1/2" Roughing Fine Pitch End Mill 5 Flutes MHC 7242263
GREENE 20mm x 1-1/2" x 6" 3 FLUTE COATED SOLID CARBIDE END MILL
1 1/4" x 1 1/4" x 4" x 6 1/2" Roughing End Mill 6 Flutes ACCULEAD 96277
End Mills 13/16", 1", 1 1/4" - 2 & 4 Flutes. Mixed LOT OF 3
New Niagara HSCO End Mill 1" x 1" x2" x 4-1/2" TiCN Coated 6 Flute
People who viewed this item also vieved
Lot of 200+ Pull Splines. Keyways, and Flat Broaches
10 Piece Lot of Sandvik CNMG-541QM Inserts
40 Piece Lot of Sandvik N151.2-A156-40-4P Inserts
![KENNAMETAL Ceramic Turning Inserts SNG 432 T0420 KY4400 Qty 5 [945]](/_content/items/images/85/2490485/001.jpg)
KENNAMETAL Ceramic Turning Inserts SNG 432 T0420 KY4400 Qty 5 [945]
![NTK Ceramic Turning Inserts RNG 43-T0820 SX6 Qty 5 [927]](/_content/items/images/86/2490486/001.jpg)
NTK Ceramic Turning Inserts RNG 43-T0820 SX6 Qty 5 [927]
LOT OF (4) CYLINDER MACHINIST TOOLING MACHINE SHOP TOOLS - USED
LOT OF (3) hydraulic valve spools - USED
STRIPPIT Nisshinbo AMADA 3.5" PUNCH & DIE WILSON SPECIAL PAIR 13193 A & B 45
STRIPPIT Nisshinbo AMADA 3.5 PUNCH & DIE WILSON 1.704 X 1.764 SD 1.713X1.773 48
Michigan Drill C805-1/2, 1/2", Solid Carbide, Chucking Reamer
#6, 2 1/8" to 2 1/2", 12 Flute, Tapered Hand Reamer
PLAIN MILLING CUTTER 4 OD X 3/4 THICK X 1-1/4 MORSE HIGH SPEED 22 TEETH #8206
STRAIGHT TOOTH PLAIN MILLING CUTTER 1-49/64" X 3/16" THICK X 1" 18 TEETH #8214
6mm High Precision No-burr Round Bottom Engraver Tool 90° 0.3mm
CRAFTSMAN Cutting Tool 9 17253 5.0 Amp 2 Speed New
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies