2 bushing for sale, brand-new and used.

THIS ITEM IS FOR 1 (ONE): BOURNS 3852Z-A98-194A PANEL MOUNT POTENTIOMETER 190K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/8" SHAFT X 1/4"L, 1/4" BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut and lockwasher. Buyer pays S&H, $2.75 in USA, $7.75 worldwide. Payment, with-in

LOT OF 1 (ONE): BOURNS 3852Z-AB4-504A PANEL MOUNT POTENTIOMETER 500K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/8" SHAFT X 5/16"L, D flat. 1/4" BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut and lockwasher. Buyer pays S&H, $2.95 in USA, $7.95 worldwide.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE) SPECTROL MINIATURE POTENTIOMETER MFGR: SPECTROL (VISHAY/SPECTROL) BUSHING MOUNT MODEL: 162 (P/N 162-1-1-103) WIRE WOUND RESISTANCE: 20 OHMS (THIS WOULD BE A SPECIAL ORDER) TOL: 5% res., 0.30% lin. WATTAGE: 2 WATTS TURNS: 10 TURNS

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE) SPECTROL MINIATURE POTENTIOMETER MFGR: ETI BUSHING MOUNT 10-TURN POT MODEL: MW10-10B WIRE WOUND RESISTANCE: 1K (1,000) OHMS TOL: 3% res., 0.25% lin. WATTAGE: 1 WATTS TURNS: 10 TURNS Anodized aluminum housing

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (ONE): CTS POTENTIOMETER AS FOLLOWS: 5K (5,000) OHM 2 WATT WIRE WOUND LOCKING SCREWDRIVER ADJUST LINEAR TAPER APPROX. DIM: 1 1/4" OD X 5/8" behind panel, 3/8" bushing Refurbished, tested good and guaranteed, with lockwasher, mounting nut, and locking nut.

H.H. Smith, Shaft bushing for 1/4 inch shafts. 3/8 inch thread on outside similar to thread on potentiometers variable capacitors, etc, or any item with standard bushings.

Description 2 Pieces Tocos (Cosmos) RV24YN Carbon Industrial Panel Controls

BOURNS P/N 82C1A-E12C26 POTENTIOMETER 2.5 MEG OHM 1 WATT 10% AUDIO TAPER CERMET RESISTANCE ELEMENT 5/8" SQUARE, SINGLE TURN, SCREW-DRIVER ADJUST TERMINALS ARE J-HOOKS 1/4" BUSHING, WITH MOUNTING NUT AND LOCK WASHER. Each item is for 1 pot. New, old stock.

New unused stock from my company that used to sell an industrial product that used these potentiometers. They are well made and were 100% reliable in our application. The pots were manufactured by Clarostat before the brand was acquired by Honeywell.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): BOURNS 3851C-282-103B PANEL MOUNT POTENTIOMETER 10K OHM CONDUCTIVE PLASTIC 1 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/8" SHAFT X 5/8"L, 1/4" BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut and lockwas

THIS IS A PRECISION POTENTIOMETER MADE BY: NEW ENGLAND INSTRUMENT CO. (NEI), STANDARDS DIVISION. MFGR.

LOT OF 1 (ONE): BOURNS 3852A-282-103A PANEL MOUNT POTENTIOMETER 10K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/4" SLOTTED SHAFT X 1/2"L, 3/8" BUSHING SOLDER LUG TERMINALS REMOVED FROM NEW EQUIP. with mounting nut and lock washer. These pots have been tested and guaranteed good.

8K Linear Taper Potentiometer With Switch 0.2 Watt 10% Tolerance 6mm Split Knurled Shaft 260° Shaft Rotation Threaded Bushing: 6.85mm or 9/32" Fits 9/32" mounting hole. Shaft Length:14.5mm or 9/16" Bushing Length: 6.75mm or 17/64" OAL: 31mm or 1-1/4" (includes solder tabs) Body Diameter: 17mm or 21/32" Body Height(To Bushing): 10.25mm or 13/32" (includes solder tabs) Note: measurements are approximate. Includes washer and nut.

You are bidding on (1) new Borg model 205, 20,000 ohm, 10 turn precision potentiometer that are 5 W 3 percent. They are 1 3/4 inch diameter & 2 inches long with a 1/4 inch diameter X 1/2 inch long shaft. These were made around 1960 and come in their original box.

THIS ITEM IS A: BOURNS KNOBPOT, 10-TURN PRECISION POTENTIOMETER: (ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) MFG: BOURNS "KNOBPOT", CLOCKFACE READOUT, 10-TURN P/N: 3640S-1-103 10K OHM (10,000), WIREWOUND RES +/- : 5% RATED: 2.5 WATT DIM: 1 1/4" DIA X 1 1/2" LONG 3/8" BUSHING Refurbished, with washer, mounting nut. All pots

THIS ITEM IS FOR (ONE), SUB - MINIATURE POTENTIOMETER. SPECS: 1K OHM LINEAR TAPER CARBON ELEMENT Stainless-Steel Shaft - 1/8" OD X 1/2"L w/screwdriver slot on end. Body dim, approx.: 3/8" OD X 5/8" Deep including leads, 1/4" bushing mount.

** ALL POTS I SELL ARE TESTED AND GUARANTEED GOOD ** LOT OF 1 (one): CTS VINTAGE POTENTIOMETER W/SWITCH 500K OHM (500,000) +/- 20%, AUDIO TAPER SWITCH: TYPE GC RATED 3A - 125vAC, 1A - 250vAC SPST - N.O. (looking at shaft, full CW, is CLOSED, ON. CCW to max rotation is open, off.

THIS ITEM IS FOR 1 (ONE) PRECISION POTENTIOMETER AS FOLLOWS: VALUE: 10K (10000) OHM 10-TURNS TOL: +/- 5% LIN: +/- 0.5% RATED: 2 WATTS (I think) MADE BY: SPECTROL ELECTRONICS in the USA MODEL: 500-1151 PANEL MOUNT, LOCKING, SCREW DRIVER ADJUST DIM: 7/8" OD X 1 1/2" L BUSHING: 1/2"L made of aluminum. (could b

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR ONE: HELIPOT PRECISION POTENTIOMETER div. of Beckman Instruments, Inc. Fullerton, CA USA P/N: 5311-50-0 3K OHMS (3,000 OHMS) TOL.: 5% LIN: +/- 0.5% LINEAR TAPER CONTINUOUS ROTATION (NO STOPS) Gold plated, turret solder terminals