2 hp water pump for sale, brand-new and used.

Please call us if you have any questions. We want you to get the right equipment - 1-855-4Elimia. This is for a new magnetic motor starter designed to run air compressors or pumps or any machine that automatically runs based on it's settings.

This scrubber has been tested in a limited capacity. It was removed from a working environment. The unit did turn on at time of testing.

The Shop-Vac Industrial Ultra Pump vacuum lets you pick up water from one place and pump it to another using a standard garden hose it even allows you to continue vacuuming while you empty the tank. Pump moves water up to 50 feet @ 6 GPM. U.S.A.

We specialize in Cool Misting but this pump has many uses including pressure washing and can be adapted for most general water pumping needs. Pumptec 113c Pumptec M70 120vac with Rectifier Pumptec 1000 PSI pressure regulator Pumptec Pulse hose with 1/4 F NPT fitting Pumptec temperature release valve Pumptec pump series 113C with plunger type design is the most efficient way possible to pressurize water.

Pressure Plunger Pump TypeBelt-Drive Flow Capacity (GPM)3 RPM1750 HP Required @ 500 PSI1.0 HP Required @ 1000 PSI2.1 HP Required @ 1500 PSI3.1 HP Required @ 2000 PSI4.1 HP Required @ 2500 PSI5.1 Shaft Dia.

This Comet BXD2528G replacement pressure washer or power washer pump comes complete with unloader valve, detergent injection system, bolts to mount it to an engine, and three high pressure outlet fittings so you can customize your pump to your existing hose setup. This pump will fit most 5 HP to 7 HP engines with a 3/4" horizontal shaft. This pump works great for residential or light duty commercial use.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

For Sale is a General T-Series T2035E Pressure washer Pump for Electric Motor Pressure Washers. New from the factory. This is for those folks that prefer General over other Pump Companies.

Pictured is a TS-1511/WS151 Pump. This pump is the same design, just different specs. For Sale is a General T-Series TS1331/ or Interpump W133 Pressure washer Pump New from the factory.

For Sale is a General T-Series TT941 or interpump WW94 Pressure washer Pump New from the factory. This is for those folks that prefer General over other Pump Companies. These pumps are extremely reliable an easily rebuilt if needed.

IPT Pump 2P5XAR Engine Driven Portable High Pressure Pump with Briggs & Stratton Vanguard Engine, Aluminum, Curve C, 2" NPT Male Suction & Discharge PortsSpecifications for this item Brand Name AMT Pumps Part Number 2P5XAR

Bench tested With out water pump works sold as is

ARMSTRONG ASTRO 290CL CAST-IRON CIRCULATING PUMP, 3 SPEED, NEW, $300 RETAIL!! This circulating pump is new and never used, though we no longer have the original box. This is Armstrong model 290CL (part #110223-328).