2 in fire hose for sale, brand-new and used.

2-1/2" X 50 FT Double Jacket Contractors Hose, 400 PSI Test (200 PSI Service rated) with aluminum NPSH thread fittings. These are not fire thread interchangeable. This hose is new overstock, it is in original packaging, about 3-4 years old.

As pictured....This 1 1/2" single jacket hose looks to never have been used. The inner liner is clear. Thanks for looking

Up for bid is a brand new 1-1/2"Inch x 50'ft single jacket lightweight polyester compact hose and fire nozzle. This fire hose is for fire protection, construction and for all of your watering/ dewatering needs. This 1-1/2" hose has a working pressure of 250 psi and is tested for a rating of 500 psi.

The “Powhatan” Model 18-157-50000, Angle Hose Valves are designed for use in piping systems where it is necessary to access the system for a fire hose connection. Typical applications are in fire department connections, gravity and pressure tank connections, and public water supplies to sprinkler and standpipe systems. 2 1/2 " (63.5 mm) Valve.

1 1/2 " Angle Fire Hose Valve Female NPT x Male NST Used as fire hose outlet connections Cast brass, 300 Psi/2070KPA UL, ULc listed and FM Approved Model A97H 1 1/2 " Female NPT inlet x 1 1/2 " Male NST thread outlet

Apache Double Wall Fire Hose Apache Double Wall Fire Hose is a flexible, abrasion-resistant fire hose, strong enough to be used in industrial wash down and fire protection applications. It is made with high tensile, 100% polyester yarn completely woven with complete filler yarn in both jackets. U.S.A.

This auction is for a nice used AKRON Style 1727 TURBOJET 2 1/2" NH FIRE HOSE NOZZLE. 125 - 250 GPM. The nozzle measures approx.

Industrial FIRE HOSE SHUT OFF CLAMP made by KCR MFG Portland Number "2" is found stamped 3x on the tool, also "1.93 FSS" Capable of shutting off water flow in a large fire hose

Fire Hose Rack In great condition- preowned 1 1/2" hose Functioning pins for holding hose Made by The General Detroit Corporation - Model U Semi Automatic Hose Rack Dimensions: 19" long x 4 1/8" wide x 1.5" high Provides an immediate water source for fire control and suppression Permits one-person operation Rack was for 1.5" NH x 50 ft. hose. Nozzle clip was for a 10" brass nozzle.

YELLOW DOUBLE JACKET FIRE HOSE 2.5" X 50 FT With ALUMINUM COUPLINGS This item is being USED condition, Good Condition (Little Dirty) . Was replaced for new hoses in a FD Include: (1) USED Fire Hose.

for sale clapper valve Siamese with 2.5" NH NST NS National Standard Fire Hose Thread inlets and outlet. Pyrolite aluminum Akron Model # style 1262. works perfectly for water tender and tanker shuttle Lists new for $1232.00 Free Priority mail which is over $27 and same day handling which means 2 delivery days to major metro areas in lower 48 global shipping and overnight Express mail available.

This is a used fire hose tool made Firequip made in Burlington N.C. If any questions just ask. Sold as is.

American reel fire hose reel some rust.  I am not sure what size I think it is for 2 inch hose . Pickup only items must be picked up in 90 days unless you make other arraignments. After it will be resold

<font size="5"><strong>&lt;font size="5"&gt;&lt;strong&gt;&a

This posting is for one used fire hose, rubber 4" x 100 ft with couplings. I have 2 100ft hoses, and one 75ft with an obviously damaged coupling on one end. I am not a tech for this item, but the other coupling looks okay.

This listing is for a new in box un used Elkhart brass fire nozzle. It is 125 GPM and is M# SFL-GN-125. It is for 1 1/2" hose.

This auction is for the NEW, UNUSED 2 1/2" X 50' fire hose shown in the pictures. Found at an estate sale is this new section of hose...s/n 029818. MINT UNUSED Questions are answered thru Q&A.