You are viewing a 2.5 inch pulley with a 5/8 bore Good Condition Because many of the items have been gently used, please expect some gentle wear. Payment Option: I accept Pay Pal. Your prompt payment is great
Old and well-built 1/3 hp Westinghouse motor that was used with a small air compressor. It is mounted on a metal plate that can remain or be removed with your preference.
NEW or like new 14.5 inch cast iron dual belt pulley / sheave / flywheel designed for an air compressor pump. Looks unused with no wear and 99% of OEM black paint. Center bore is for a tapered crankshaft.
This is an original v belt pulley for a Maytag 92 single cylinder hit and miss gas engine. It is in good condition with no cracks, breaks, or repairs of any kind. It measures about 4 1/2 inches in diameter and has a 1 1/4 inch bore.
This is an extremely hard to find original cast iron flat belt pulley and mounting stub shaft for a 6hp John Deere E hit and miss gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. The stub shaft is part number E2014R and the pulley has a 6 1/2 inch face and is 12 inches in diameter.
This is a real nice original cast iron pulley for an International Harvester Tom Thumb or 1hp Famous or Titan gas engine. It may also be correct for the 1hp Titan engines. It is part number G-6618 and is in excellent condition with no cracks, breaks, or repairs of any kind except for a small chip on one edge.
This is a real nice original cast iron pulley for an International Harvester 1 1/2-2 1/2 or 3-5hp LA or LB gas engine. It is part number 3591-D and is in excellent condition with no cracks, breaks, or repairs of any kind. It has a 5 inch face and is 4 3/4 inches in diameter.
This is a real nice original cast iron clutch pulley for a 2 1/2hp Mogul or 3hp Type M gas engine made by the International Harvester Company. It is in excellent condition with no cracks, breaks, or repairs of any kind except one repaired spoke on the carrier. A very nice job was done and it's very tough to notice especially when it's on an engine.
BELT DRIVE ALIGNMENT Fixturlaser PAT - the final solution to all your belt alignment needs! With the Fixturlaser PAT, you are never in doubt on whether your belt transmissions are aligned or not. By using the groove as reference, you will achieve a precise alignment which reduces belt wear, bearing failures and vibrations.
This is a real nice original cast iron pulley for an International Harvester 1 1/2hp Type M engine or a 1 3/4hp International Harvester Mogul engine. It is part number 969T and is in excellent condition with no cracks, breaks, or repairs of any kind. It has a 5 inch face and is 6 inches in diameter.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.