2 ton arbor press for sale, brand-new and used.

This 4 pc set is now being offered with our PREMIUM X-BARS. Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton (or less) presses with, front to back, gap of about 4.25 inches.

Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton presses with, front to back, gap of about 4.25". These are the most economical press bars on the internet...shipped FREE right to your door!

Totally restored Famco #1 3/4-ton rated arbor press. This is the third one I've done and I know these presses inside and out. The unit has been stripped down to smallest individual parts, de-greased, de-rusted with a chelating solution for long-term protection, primed, and painted with high temperature VHT wrinkle paint on all surfaces including the bottom, then oven-cured at 175° for two hours for a durable finish.

Totally restored Famco #1 3/4-ton rated arbor press. This is the third one I've done and I know these presses inside and out. The unit has been stripped down to smallest individual parts, de-greased, de-rusted with a chelating solution for long-term protection, primed, and painted with high temperature VHT wrinkle paint on all surfaces including the bottom, then oven-cured at 175° for two hours for a durable finish.

Totally restored Famco #0 1/2-ton rated arbor press. This is the third one I've done and I know these presses inside and out. The unit has been stripped down to smallest individual parts, de-greased, de-rusted with a chelating solution for long-term protection, primed, and painted with high temperature VHT wrinkle paint on all surfaces including the bottom, then oven-cured at 175° for two hours for a durable finish.

Our X-BARS, BIG BARS and Press Plates are proudly used around the country by: Farm, Aviation, Auto and Heavy Duty shops, plus Racers, Marinas, Machine Tool, Industrial and Hobbyists of all descriptions. Sold in Matched Pairs

These bars are being sold locally so, quantity for sale may change abruptly. Mighty 100 Ton Steel 2"x4". These steel bars are made specifically for 75 to 100 ton presses with a span of 10.5 inches.

These bars were designed for use on 2 Ton arbor presses where they easily support 4000 lbs. over the anvil wheel slot span of less than 1.42”. They are also useful as bench blocks, shims, and set-up blocks.

Used 2 Ton arbor press.

Sale is for a 2 Ton Phase 2 Arbor Shop Press. This unit was purchased for our shop several years ago, but never used. It has been stored on a shelf and has some rust, dust and shelf wear.

This listing is for an Enerpac press. 30 Ton Capacity Double Acting RR308 Cylinder Model A330 This arbor press is used and in good working order. The top where the cylinder screw in was ground down for a lower mount height.

Famco Model 0 Arbor Press 1/2 Ton for Bench Tops EUC Here is a Famco 0 Arbor Press - 1/2 Ton and made for Bench Tops Approximately 9” long great for mounting on a bench top.

DescriptionMount this hand-operated arbor press onto your workbench to handle smaller production and assembly jobs such as installi

Wholesale Direct Auto Parts

This is a used but well cared for very Heavy Duty Arbor Press. Famco list it as a 3 ton with a 50 - 1ratio. It weighs 160 lbs and the dimensions are 8 inches wide by 18 inches deep and 21 1/2 inchestallI have it listed for local pickup, but I will work with the buyer through a shipping broker to crate and/or palletise the press.

Mount this hand-operated arbor press onto your workbench to handle smaller production and assembly jobs such as installing and removing bear

OUT OF BOX ARBOR PRESS, APPEARS UNUSED. COMPLETE AND IN PERFECT SHAPE015-02-04-17-653 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)

Mathews Engineering Spare Arbor Rack for Central Machinery & Harbor Freight model 03552 1 Ton Arbor Press PART NUMBER: APSA1 Arbor dimensions: 0.975" x 0.975" x 9-1/2" Material: 1018 Cold Finished Steel Tooth Pitch: 0.3085" (~ 3.24 TPI) Tooth Whole Depth: 0.192" These arbors are machinable so it is easy to drill & machine the ends for making dedicated arbor press set ups. INCLUD

Product Overview:Dake Arbor PressGrand Haven Model- 2 1/2 (202) Steps up the pressure for heavier press work. These Arbor Presses with a compound leverage mechanism features a sliding pin, rack and pinion table adjustment. Product Features:Compound levera