2.5 gate valve for sale, brand-new and used.

Products Description

2 1/2 " Straight Pattern Brass Gate Valve with non-rising stem and swivel inlet. For use on hydrants, standpipes and fire pumps up to 300 lbs (2070 kPa) applications. Female Swivel NST x Male NST Valve is made up of a Brass body and Brass trim Red speed handle and pin lug swivel on the inlet and male hose thread on the outlet.

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

SCOTT Delivery Systems Descriptions Used unit, good condition, pulled from a system, no retest, sell as is. Please look over in the 4 photos for detail. Scott/ APTECH 581-17CV-VCR REGULATOR VALVE AP1510S 4PW MV4 FV4 0 0 ST SP, MAX OUTLET 100PSI, MAX INLET 3500PSI with 2 APTECH GATE VALVES, MAX PRESSURE 3000PSI Local pick up free Used Unit.

Edwards NGW415000 Gate Valve Amplifier used working Inventory # AA-4756 This Edwards NGW415000 gate valve amplifier is used working surplus. There are minor blemishes and scuff marks on the outer housing of this unit. Otherwise the physical condition is good and clean.

Nor-Cal GVP-4002-ISO-S42 4" Pneumatic Gate Valve w/Flange Plates

MDC Gate Valve, 6" Port, 8" CF Flange, Model GV-6000V-P, Pneumatic Polished SS, Switchable Operation,70-100 psi A High Vacuum Valve with CF Cu gasket Port Flanges and Viton Gate and Bonnet sealed gaskets. Smooth turning operation, bright polished Chromium finish. MDC is one of the top manufacturers of High Vacuum and Ultra High Vacuum products.

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

ADD-A-VALVE® Size: 1" (Other available Sizes: 1/2", 3/4", 1 1/4 ", 1 1/2 " & 2") Description Emergency shut off device for copper tubing eliminates shutdowns. Allows replacement of defective valve or installation of new

4" Proco Proflex 730 rubber duckbill check valveslip on for 4" CI pipe Brand new surplus materialmfg. list price $690.00ebay surplus price $515.00 check out our other waterwor

V-Tex 3D80-000006-V1 Pneumatic Slit Gate Valve used working Inventory # AA-5406 This V-Tex 3D80-000006-V1 Pneumatic Slit Gate Valve is used working surplus. There are some very minor blemishes on this unit. Otherwise the physical condition of this unit is great and clean.

V-Tex 3D80-000006-V1 Pneumatic Slit Gate Valve used working Inventory # AA-5406 This V-Tex 3D80-000006-V1 Pneumatic Slit Gate Valve is used working surplus. There are some very minor blemishes on this unit. Otherwise the physical condition of this unit is great and clean.

Brand: NIBCO Condition: New without Factory Packaging Model: T-103-HC

4" Gate Valve, Pneumatic, 6" CF Flanges, HV, SS, Mod 125-0400, ( 1100 Series) High Vacuum Apparatus, Polished SS, Clean High Vacuum (HV) Gate Valve, Full 4" port with 6" CFF flanges. Highly polished SS / Chromium, overall size is 18" L x 7" W x 4" H.kk Pneumatic operation at about 80 psi. The last turn seats and locks the sealing gate against the Viton O-ring.

VAT 6" Vacuum Gate Valve 12144-PA44-AGT1 Extension Flange Riser This is the extension flange riser only, VAT Valves available if you need them. Please verify all dimensions with your valve prior to purchase. Check Out: *Purchase: Making purchases is easy and simple.