+ Post new Ad
20 HSS / Cobalt Drill Bits - 1/4" - 6" .243"-.253", US $21.49 – Picture 0
20 HSS / Cobalt Drill Bits - 1/4" - 6" .243"-.253", US $21.49 – Picture 0

20 Hss / Cobalt Drill Bits - 1/4" - 6" .243"-.253"

US $21.49

  • Goddard, Kansas, United States
  • Jan 30th
Open on mobile:
QR code
LOT OF 20 DRILL BITS, 1/4" Length -about 6" .243"-.253" Made for use in  quick change drill motors, but can be used in chuck drills also. Resharpened for Boeing by US Tool Co. *SURPLUS AVIATION* These cost Boeing over $7.00 each! 20 Each of the following: .243"-.253" Typical picture, your set may look slightly different Contains HSS and Cobalt Drills For maximum shipping savings on multiple orders, please request an invoice for correct shipping charges before paying. See my Ebay Store for more drill bits
Condition Manufacturer refurbished :
An item that has been professionally restored to working order by a manufacturer or manufacturer-approved vendor. This means the product has been inspected, cleaned, and repaired to meet manufacturer specifications and is in excellent condition. This item may or may not be in the original packaging. See the seller’s listing for full details.
Seller Notes “These are regrinds purchased from a major aircraft manufacturer”

Directions

Similar products from Extended Length Drills

Precision Twist Taper Length Drill Parabolic #38 135 Deg HSS S/P L 4 5/8" Flute

Precision Twist Taper Length Drill Parabolic #38 135 Deg HSS S/P L 4 5/8" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Extended Legnth Twist Drill Bit 19/64"

Extended Legnth Twist Drill Bit 19/64"

  • Coventry, Rhode Island, United States
  • Jan 30th
Machinists 1/2/D BUY NOW USA NEW Solid Carbide XL Drill

Machinists 1/2/D BUY NOW USA NEW Solid Carbide XL Drill

  • Lutz, Florida, United States
  • Jan 30th
Extended legnth twist Drill Bit 45/64"

Extended legnth twist Drill Bit 45/64"

  • Coventry, Rhode Island, United States
  • Jan 30th
Precision Twist 5/16" Taper Length Drill 135 Deg Cobalt L 6 3/8" Flute 4"

Precision Twist 5/16" Taper Length Drill 135 Deg Cobalt L 6 3/8" Flute 4"

  • Summerville, South Carolina, United States
  • Jan 30th
(#4957) New Machinist 29/32 Inch USA Made Straight Shank Drill

(#4957) New Machinist 29/32 Inch USA Made Straight Shank Drill

  • Troy, Michigan, United States
  • Jan 30th
Precision Twist Taper Length Drill #7 118 Degree HSS Overall Length 6" Flute

Precision Twist Taper Length Drill #7 118 Degree HSS Overall Length 6" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist 2ACO 3.75 Mm Metric Cobalt Drill 135 Deg NAS 907 39mm Flute

Precision Twist 2ACO 3.75 Mm Metric Cobalt Drill 135 Deg NAS 907 39mm Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Diager 7.1mm (9/32") Carbide Tipped Long Reach Twist Drill Bit - NOS

Diager 7.1mm (9/32") Carbide Tipped Long Reach Twist Drill Bit - NOS

  • Hillsboro, Ohio, United States
  • Jan 30th
Twist Drill Bit 3/4"

Twist Drill Bit 3/4"

  • Coventry, Rhode Island, United States
  • Jan 30th
UNION 39/64 DRILL BIT TAPER LENGTH

UNION 39/64 DRILL BIT TAPER LENGTH

  • Bethlehem, Connecticut, United States
  • Jan 30th
Machinist Tools 40 pc Extra Length Drill Assortment ,Lathe, Mill, Shop

Machinist Tools 40 pc Extra Length Drill Assortment ,Lathe, Mill, Shop

  • Rochester, New York, United States
  • Jan 30th
4 Machinist Long Drill-Countersink Bits Tool & Die Turning

4 Machinist Long Drill-Countersink Bits Tool & Die Turning

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Precision Twist Taper Length Drill #79 118 Deg HSS L 1 1/2" Flute 5/16" [Misc.]

Precision Twist Taper Length Drill #79 118 Deg HSS L 1 1/2" Flute 5/16" [Misc.]

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist Taper Length Drill #19 118 Deg HSS Hi Helix L 5 3/4" Flute

Precision Twist Taper Length Drill #19 118 Deg HSS Hi Helix L 5 3/4" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist Taper Length Drill #51 118 Deg HSS L 3 3/4" Flute 2" [Misc.]

Precision Twist Taper Length Drill #51 118 Deg HSS L 3 3/4" Flute 2" [Misc.]

  • Summerville, South Carolina, United States
  • Jan 30th
TWIST DRILL 41/64" X 1/2" SHANK X 5" LONG DRILL BIT HIGH SPEED

TWIST DRILL 41/64" X 1/2" SHANK X 5" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 43/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

TWIST DRILL 43/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 47/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

TWIST DRILL 47/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 51/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

TWIST DRILL 51/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th

People who viewed this item also vieved

Lot New 1 pcs Straight Shank HSS Rolled Twist Drill Bits Dia 10.3mm(.4055")

Lot New 1 pcs Straight Shank HSS Rolled Twist Drill Bits Dia 10.3mm(.4055")

  • CN, China
  • Jan 30th
13/64" Tin Coated Titex Plus Parabolic Jobbers Length Drill Bit

13/64" Tin Coated Titex Plus Parabolic Jobbers Length Drill Bit

  • Abingdon, Maryland, United States
  • Jan 30th
Lot New 1 pcs Straight Shank HSS Rolled Twist Drill Bits Dia 11.0mm(.4331")

Lot New 1 pcs Straight Shank HSS Rolled Twist Drill Bits Dia 11.0mm(.4331")

  • CN, China
  • Jan 30th
#40, 1/16" Dia. Solid Carbide Jobber Drill Bit, USA, A4

#40, 1/16" Dia. Solid Carbide Jobber Drill Bit, USA, A4

  • Forest Hills, New York, United States
  • Feb 21st
SANDVIK C4-NC2000-10020-A24 COROMANT CAPTO CLMP CLAMP UNIT TOOL POST (P2)

SANDVIK C4-NC2000-10020-A24 COROMANT CAPTO CLMP CLAMP UNIT TOOL POST (P2)

  • Dallas, Texas, United States
  • Feb 21st
SUMITOMO CARBIDE DRILL 8.5MM DIAMETER # MDS-085SE STUB LENGTH **NIB**

SUMITOMO CARBIDE DRILL 8.5MM DIAMETER # MDS-085SE STUB LENGTH **NIB**

  • Taylorsville, Kentucky, United States
  • Feb 21st
Chicago Latrobe 1-25/64" Drill Bit 4MT, 4 Morse Taper 13-1/2" OAL ((#D204))

Chicago Latrobe 1-25/64" Drill Bit 4MT, 4 Morse Taper 13-1/2" OAL ((#D204))

  • Green Bay, Wisconsin, United States
  • Feb 22nd
Chicago Latrobe 1-41/64" Drill Bit 4MT, 4 Morse Taper 15" OAL ((#D203))

Chicago Latrobe 1-41/64" Drill Bit 4MT, 4 Morse Taper 15" OAL ((#D203))

  • Green Bay, Wisconsin, United States
  • Feb 22nd
RELTON 01G-AF Air-Flo Tool Lubricant, 1 gallon

RELTON 01G-AF Air-Flo Tool Lubricant, 1 gallon

  • Wayland, Michigan, United States
  • Feb 24th
RELTON PNT-AF Air-Flo Tool Lubricant, Pint

RELTON PNT-AF Air-Flo Tool Lubricant, Pint

  • Wayland, Michigan, United States
  • Feb 24th
USED CARBIDE TIPPED GUN DRILL .203" Dia x .625" Shank x 4.625" OAL FE020300050FD

USED CARBIDE TIPPED GUN DRILL .203" Dia x .625" Shank x 4.625" OAL FE020300050FD

  • Fairfield, Iowa, United States
  • Feb 24th
lot of 2 HS flatted 1\2 shank silver & deming 118 point drill bits...

lot of 2 HS flatted 1\2 shank silver & deming 118 point drill bits...

  • Mexico, Missouri, United States
  • Feb 24th
"RDT" Twist Drill Bits 37/64" Lot of 2 Pcs ,Black Oxide Finish

"RDT" Twist Drill Bits 37/64" Lot of 2 Pcs ,Black Oxide Finish

  • Coventry, Rhode Island, United States
  • Mar 4th
"REPUBLIC" Twist Drill Bits 19/32", Lot of 2 Pcs, Black Oxide Finish

"REPUBLIC" Twist Drill Bits 19/32", Lot of 2 Pcs, Black Oxide Finish

  • Coventry, Rhode Island, United States
  • Mar 4th
American made Drill assortment

American made Drill assortment

  • Rice Lake, Wisconsin, United States
  • Mar 4th
SCREW MACHINE DRILL LEFT HND 8.7 MM{.3425} DIA HSS TITEX GERMANY NEW 10 @ $27.50

SCREW MACHINE DRILL LEFT HND 8.7 MM{.3425} DIA HSS TITEX GERMANY NEW 10 @ $27.50

  • North Tonawanda, New York, United States
  • Mar 27th
NEW QUALITY MADE IN USA 21/32" HSS Screw Machine Length Drill 118° Point

NEW QUALITY MADE IN USA 21/32" HSS Screw Machine Length Drill 118° Point

  • Saint Louis, Missouri, United States
  • Mar 28th
NEW PRECISION TWIST 40547 R40 47/64" HSS Screw Machine Length Drill 118° Point

NEW PRECISION TWIST 40547 R40 47/64" HSS Screw Machine Length Drill 118° Point

  • Saint Louis, Missouri, United States
  • Mar 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies