+ Post new Ad
20 pcs. Sandvik CNMM 644-PR 4235 turning carbide inserts CNMM 190616-PR 4235, US $280 – Picture 0
20 pcs. Sandvik CNMM 644-PR 4235 turning carbide inserts CNMM 190616-PR 4235, US $280 – Picture 0

20 Pcs. Sandvik Cnmm 644-pr 4235 Turning Carbide Inserts Cnmm 190616-pr 4235

US $280

  • Slaskie, Poland
  • Jan 30th
Open on mobile:
QR code
SANDVIK  CNMM 644-PR 4235 / CNMM 190616-PR 4235 turning inserts The listing is for 2 packs = 20 pcs.:  'FACTORY PACK': 'PR' – geometry for rough turning with high removal rate in steel; Feed : 0.1 – 0.35 mm/rev; D O C : 0.2 – 4.5 mm; Operations: turning, facing and profiling; Advantages : all-round, positive geometry giving good roughing capability with good balance between high removal rate and minimum vibration tendencies; Components typically : axles, shafts, hubs, gears, etc.; Limitations : depth of cut and feed, risk of overloading the cutting edge; Possible optimization : geometry WM (with moderate D O C) GC4235 - P35 (P20-P45)  A CVD-coated carbide grade for roughing of steel and steel castings in unfavorable conditions. The edge line security enables the grade to handle interrupted cuts at high metal removal rates. I am not an expert on the items I sell. I do my best to represent items as accurately as possible. If you have any questions - contact me. Thank you.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand SANDVIK
Model CNMM 644-PR 4235 CNMM 190616-PR 4235

Directions

Similar products from Carbide Inserts & Face Mills

¤MILLING¤UNOPENED PACKS¤60pcs.WALTER ODHT 0605ZZN-F57 WKP35++FREE SHIPPING++

¤MILLING¤UNOPENED PACKS¤60pcs.WALTER ODHT 0605ZZN-F57 WKP35++FREE SHIPPING++

  • BG, Serbia
  • Jan 30th
SECO DNMG 432-M3 TK2001 Insert

SECO DNMG 432-M3 TK2001 Insert

  • Windsor, Connecticut, United States
  • Jan 30th
(5pcs) NPEB 500700TR IN1540 Ingersoll Insert

(5pcs) NPEB 500700TR IN1540 Ingersoll Insert

  • Windsor, Connecticut, United States
  • Jan 30th
Sandvik 10 pcs.KNUX 160410R12 4225 carbide inserts

Sandvik 10 pcs.KNUX 160410R12 4225 carbide inserts

  • Schweinfurt,Bayern, Germany, Germany
  • Jan 30th
7 OCTAGON INSERTS OECH-534-10F GR 586XRM C-044362-10-00

7 OCTAGON INSERTS OECH-534-10F GR 586XRM C-044362-10-00

  • Thomaston, Connecticut, United States
  • Jan 30th
VBMT 332-UM 1125 SANDVIK Insert

VBMT 332-UM 1125 SANDVIK Insert

  • Windsor, Connecticut, United States
  • Jan 30th
¤¤BEATIFUL INSERTS¤¤30pcs.ISCAR OFMT 07T3-AER-76 IC328¤¤WORLDWIDE FREE SHIPPING

¤¤BEATIFUL INSERTS¤¤30pcs.ISCAR OFMT 07T3-AER-76 IC328¤¤WORLDWIDE FREE SHIPPING

  • BG, Serbia
  • Jan 30th
(10pcs) DPGT3252HP KC730 KENNAMETAL Insert

(10pcs) DPGT3252HP KC730 KENNAMETAL Insert

  • Windsor, Connecticut, United States
  • Jan 30th
SANDVIK R390-17 04 08M-PM 1025 Carbide Insert

SANDVIK R390-17 04 08M-PM 1025 Carbide Insert

  • Windsor, Connecticut, United States
  • Jan 30th
10pcs. Iscar VCMW 331 IB62 CBN tip insert VCMW 160404 T hardened steel VCMT 331

10pcs. Iscar VCMW 331 IB62 CBN tip insert VCMW 160404 T hardened steel VCMT 331

  • Slaskie, Poland
  • Jan 30th
10pcs Iscar CCMW 3(2.5)2 CBN tip insert CCMW 09T308 hardened steel CCMT 3(2.5)2

10pcs Iscar CCMW 3(2.5)2 CBN tip insert CCMW 09T308 hardened steel CCMT 3(2.5)2

  • Slaskie, Poland
  • Jan 30th
60 pcs. Sandvik R390-180612M-PMR 4240 milling inserts R390-18 06 12M-PM 180612

60 pcs. Sandvik R390-180612M-PMR 4240 milling inserts R390-18 06 12M-PM 180612

  • Bielsko-Biala, Poland
  • Jan 30th
20 pcs. Sandvik CNMM 644-PR 4225 turning carbide inserts CNMM 190616-PR 4225

20 pcs. Sandvik CNMM 644-PR 4225 turning carbide inserts CNMM 190616-PR 4225

  • Slaskie, Poland
  • Jan 30th
10pcs Iscar DCMW 3(2.5)2 CBN tip insert DCMW 11T308 hardened steel DCMT 3(2.5)2

10pcs Iscar DCMW 3(2.5)2 CBN tip insert DCMW 11T308 hardened steel DCMT 3(2.5)2

  • Slaskie, Poland
  • Jan 30th
10pcs Iscar DNMA 441 IB66 CBN tip insert DNMA 150604 T hardened steel DNMG 441

10pcs Iscar DNMA 441 IB66 CBN tip insert DNMA 150604 T hardened steel DNMG 441

  • Slaskie, Poland
  • Jan 30th
40 pcs Iscar S845 SNMU 1305ANR-MM IC830 milling inserts S845 SNMU 13 05 ANR SXMU

40 pcs Iscar S845 SNMU 1305ANR-MM IC830 milling inserts S845 SNMU 13 05 ANR SXMU

  • Slaskie, Poland
  • Jan 30th
MITSUBISHI CNMG432MA UE6110 Insert

MITSUBISHI CNMG432MA UE6110 Insert

  • Windsor, Connecticut, United States
  • Jan 30th
¤¤FACTORY PACKS¤¤¤WALTER 20pcs.ADKT 10T3PER-F56 WKP35S¤¤WORLDWIDE FREE SHIPPING¤

¤¤FACTORY PACKS¤¤¤WALTER 20pcs.ADKT 10T3PER-F56 WKP35S¤¤WORLDWIDE FREE SHIPPING¤

  • BG, Serbia
  • Jan 30th
10 Pack Carbide Inserts Top Quality RTW Brand SNMG 543M CQ-2 Brand New Lot Save

10 Pack Carbide Inserts Top Quality RTW Brand SNMG 543M CQ-2 Brand New Lot Save

  • San Tan Valley, Arizona, United States
  • Jan 30th
CNMG 190612-MR 4225 SANDVIK Insert

CNMG 190612-MR 4225 SANDVIK Insert

  • Windsor, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

New 50 Pcs - TNG 434T-0320 Grade 650 Ceramic Inserts Sandvik

New 50 Pcs - TNG 434T-0320 Grade 650 Ceramic Inserts Sandvik

  • Cincinnati, Ohio, United States
  • Jan 30th
VNGA 332 TO425 HC2 NTK Ceramic Inserts (10) New and in Original Packages

VNGA 332 TO425 HC2 NTK Ceramic Inserts (10) New and in Original Packages

  • Waterford, Michigan, United States
  • Jan 30th
(#4380C) Resharpened .480/.483 Inch Double End Style End Mill

(#4380C) Resharpened .480/.483 Inch Double End Style End Mill

  • Warren, Michigan, United States
  • Jan 30th
(#4306C) Used 1.140 of an Inch Single End Style With Radius Corners End Mill

(#4306C) Used 1.140 of an Inch Single End Style With Radius Corners End Mill

  • Warren, Michigan, United States
  • Jan 30th
2 PORTER CABLE PNEUMATIC AIR 1/2" REVERSIBLE DRILL PTD501 & SHEARS PTX6

2 PORTER CABLE PNEUMATIC AIR 1/2" REVERSIBLE DRILL PTD501 & SHEARS PTX6

  • Essex, Maryland, United States
  • Jan 30th
Kennametal J08-SCLPR2 NH6 carbide boring bar .500 dia. + inserts CNC lathe

Kennametal J08-SCLPR2 NH6 carbide boring bar .500 dia. + inserts CNC lathe

  • Trempealeau, Wisconsin, United States
  • Jan 30th
England 4 Mm Steel Punches

England 4 Mm Steel Punches

  • House Springs, Missouri, United States
  • Jan 30th
1/32 Gruv Grip Steel Stamp Figures By Young Bros.

1/32 Gruv Grip Steel Stamp Figures By Young Bros.

  • House Springs, Missouri, United States
  • Jan 30th
MACHINE REAMER 23.812mm OR 15/16 0.9375 L&I 33/64 TURNED SHANK 8 1/2" LG #2401A

MACHINE REAMER 23.812mm OR 15/16 0.9375 L&I 33/64 TURNED SHANK 8 1/2" LG #2401A

  • Resaca, Georgia, United States
  • Jan 30th
MACHINE REAMER 14.287mm OR 9/16 0.5625 L&I RH HELIX RH CUT 7/16 SHANK #2402A

MACHINE REAMER 14.287mm OR 9/16 0.5625 L&I RH HELIX RH CUT 7/16 SHANK #2402A

  • Resaca, Georgia, United States
  • Jan 30th
Evolution 180 7" Steel Cutting Circular Saw Blade 36 Tooth

Evolution 180 7" Steel Cutting Circular Saw Blade 36 Tooth

  • Arlington, Texas, United States
  • Jan 30th
kett tool for parts not working

kett tool for parts not working

  • Vermilion, Ohio, United States
  • Jan 30th
THREE 1/2" X 1/2" X 4" CLEVELAND MO-MAX HIGH SPEED LATHE TURNING BIT MACHINIST

THREE 1/2" X 1/2" X 4" CLEVELAND MO-MAX HIGH SPEED LATHE TURNING BIT MACHINIST

  • Kingman, Arizona, United States
  • Jan 30th
1/2" X 1/2" X 4" CLEVELAND MO-MAX HIGH SPEED LATHE TURNING BIT MACHINIST TOOLS

1/2" X 1/2" X 4" CLEVELAND MO-MAX HIGH SPEED LATHE TURNING BIT MACHINIST TOOLS

  • Kingman, Arizona, United States
  • Jan 30th
DUMONT BROACH NO. 66617 3/4" SQUARE 13/16 PILOT

DUMONT BROACH NO. 66617 3/4" SQUARE 13/16 PILOT

  • Toms River, New Jersey, United States
  • Feb 26th
DUMONT MINUTEMAN 3/16" INCH KEYWAY BROACH HSS C SIZE USA

DUMONT MINUTEMAN 3/16" INCH KEYWAY BROACH HSS C SIZE USA

  • Torrington, Connecticut, United States
  • Feb 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies