threaded shaft for sale, brand-new and used.

1/2"-13 STAFFORD THREADED COLLAR 1-PIECE CLAMP TYPE PART #4L008 1/2"-13 THREADED ID 1.25" OD X .375" WIDE 8/32 SOCKET CAP SRCEW

I SHIP WORLDWIDE See below for Overseas Shipping/Handling Cost

304242 12" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 12" travel acme threaded rod ( 14.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

304240 6" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 6" travel acme threaded rod ( 8.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

Special offering of 4 complete sets of this item . 304244 24" nut travel, acme leadscrew kit 1/2-10 thread, single start, right hand No End Machining required Includes: 24" travel acme threaded rod ( 26.75 long), low carbon steel, oil finish 2 pieces, 1/2 ID flanged bearings, 5/16 width, 1 1/8 mounting bore, flange is .072w x 1.265 dia Threaded Shaft Clamp preloads bearings and prevents end play.

This auction is for (1) Used 9' Ball Screw, All Thread, Acme Threaded Rod, Linear Actuator with Keyed Shaft. Dimensions: 9' x 2" Shaft overall, 8' of threads, 1" keyed shaft, 7" x 4" slide bearing, 8" x 8" x 5" rotor bearing base, and approximately 3 3/8" shaft height on center. I have three of these 9' threaded shafts with actuators and I have three extra threaded shafts without actuators.

The shaft package for Ondrive PF30-xxANM or Rino 0D03454, including: 1. Precision 303 Stainless Steel Shaft.---Dia. 8mm ( 37mm long) with additional 1/4" long 20 TPI Threaded ( Dia.

The shaft package for Ondrive PF30-xxANM or Rino 0D03454, including: 1. Precision 303 Stainless Steel Shaft.---Dia. 8mm ( 34mm long) with additional 1/4" long 20 TPI Threaded ( Dia.

sorry I could not get a pic of the data plate. its 2hp and can run on 208-30 or 460. 3450 rpm.

Genuine U.S. Military Issue Surplus   Vintage United Motors Generator Armature For General Motors   GM P/N: 1941174 AC Delco P/N: 1941174   2920-00-777-7181 Slot Wound Construction Splined Shaft with Threaded End (See Pictures) Overall length is 12" (approximately) The large center section is 4" Diameter The shaft on the back end is 5/8" x 3/4" Diameter The overall length of the shaft in the front is 4 1/4" The splined section of the shaft is...

DAYTON ELECTRIC JET PUMP MOTOR 5K660 Manufacturer:MANUFACTURING CO. Dayton® 1-Phase Face-Mount Jet Pump Motors Single-compartment design. 56C frame has carbon steel keyed shaft.

DAYTON ELECTRIC JET PUMP MOTOR 5K660 Manufacturer:MANUFACTURING CO. Dayton® 1-Phase Face-Mount Jet Pump Motors Single-compartment design. 56C frame has carbon steel keyed shaft.

Up for grabs today, we are offering a set of two---yes that's 2--a pair---1 +1, of new old stock Norton 6" stick and sand back-up pads for sanding. Just put your peel and stick 6" sandpaper pad on, and go to work! These have the 5/16" - 24 diameter male threaded shaft and the vacuum holes.

Rare Vintage NEW OLD STOCK-Perfect and Pristine - Ammco 2- 1/2" Grinding Wheel This is a quality made grinding wheel, it has NEVER been used or tried perfect. Hole in center is for threaded shaft, i believe it is 9/16 wit a # 16 thread Wheel is 2- 1/2 wide and 3/4 deep No Reserve

TAPERED THREADED MANDREL POINT MANDRELS - SCREW THREAD

var itemNumber = window.ebayItemID ?

[ Century USN1302 3 HP 208-230 V 60 Hz 3001-3600 RPM Pool Pump Motor

var loadingImages = new Array();function autoSizeImage(src, tagName, maxSize) {if (document.images){if (loadingImages[src.toString().toLowerCase()] == null) {loadingImages[src.toString().toLowerCase()] = new Image(); loadingImages[src.toString().toLowerCase()].src = src;} if((loadingImages[src.toString().toLowerCase()].width maxSize)){if (aspectRatio > 1.0) {aspect

Good shape. 4" lathe chuck with 3 self-centering jaws. Square key.

National Refrigeration Products NRP5421 Motor. 208-230V AC, 50/60Hz, 1550 RPM. Cast iron.