208 40 for sale, brand-new and used.

AVAILABLE FOR SALE MOTOR , HERE ARE THE SPECS : Motor Application HVAC/R Motor Sub Application Direct Dr Fan/Blower Motor Type PSC Enclosure Open Air-Over HP 1/2 to 1/6 Nameplate RPM 1075 Voltage 208-230 Full Load Amp 3.6 Hz 60

AVAILABLE FOR SALE MOTOR , HERE ARE THE SPECS : Motor Type Permanent Split Capacitor Enclosure Open Air-Over HP 1/4 Number of Speeds 1 Nameplate RPM1075 NEMA/IEC Frame 48YZ Voltage 208-230 Hz 60 Full Load Amp s2.0-1.8

Condenser Motor - 1/5 hp 208-230/1/50-60 (825 rpm/1 speed) 51-102008-08 Technical Data: HP: 1/5 No. of Speeds: 1 High Speed (RPM): 825 Input Voltage (V): 208 Input Voltage (V): 220 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 50 Frequency (Hz): 60 Rotation Direction (OSE): CCW Run Capacitor (uF/V): 5/370 FLA at 230V (A): 1.00 LRA at 230V (A): 2.40 Shaft Diameter (in.): 1/2 Motor

THIS SALE IS FOR A BRAND NEW FACTORY FRESH, FACTORY SEALED BOX ( NOT A BEAT UP OPEN BOX THAT HAS BEEN IN A TRUCK OR GARAGE FOR GOSH KNOWS HOW LONG), U.S.S MOTORS, RESCUE DIRECT DRIVE BLOWER MULTI-HORSE-POWER BLOWER MOTOR. HP=1/2-/1/16, VOLTAGE=208-230VAC, RPM=1075/4SPEEDS, AMPS=3.6 CAPACITORS(NOT INCLUDED-BUT SOLD IN MY OTHER LISTINGS!!!), 10.0Mfd/370@1/2HP OR 7.5Mfd/370@1/3-1/6HP. THE MODEL NUMBER FOR THIS UNIT IS 5460.

DAYTON T

Dayton Industrial AC Motor 4THZ7 1HP 1710RPM 208-230/460V 60Hz Phase 3 As you can see in one of the pictures there is a minor dent around the blower area. Service Factor: 1.15, Insulation Class: F, Ambient: 40, Rot: CW/CCW NEMA Frame: 56C, Enclosure: TEFC, Bearings: Ball, Duty: Cont., Mounting: Face/Base Shaft Size: 0.625: x 1.875", Shaft Height: 3.5" No Thermal Protection Please take a look at all of the pictures, what you see in the pictures is what you will receive. Thank you.

var itemNumber = window.ebayItemID ?

GE 5KCP39LG N297S Blower Motor. Used, working condition. Removed from working unit.

UP FOR SALE MOTOR , HERE ARE THE SPECS : Enclosure Open Air-Over

up for sale motor , here are the specs : Motor Type PSC

AVAILABLE FOR SALE POOL PUMP MOTOR HERE ARE THE SPECS : Motor Application Pumps Motor Sub Application Pool and Spa Pumps Motor Type 3-Phase Enclosure Open Dripproof HP 1 Nameplate RPM 3450 Frame 56Y Voltage 208-230/460 Hz 60

High Start Torque,Open Construction, Reversible, 40 Degrees C Ambient, ,60 Hz, 1/3 HP, 1725 RPM, 115/208-230 Volt, 6.6/3.0-3.3 Full Load Amps, 56 Frame, Ball Bearing, Service Factor: 1.35.

NEW ALLEN-BRADLEY 400-DP40NA3 DEFINITE PURPOSE CONTACTOR 40 FLA 50 AMP RES PER POLE 600 VAC COIL VOLTAGE: 208 / 240V 50 / 60 HZ ENCLOSURE OPEN POLES: 3 PLEASE SEE OUR PHOTOS ALL NEW STOCK NEW IN THE BOX WE HAVE 10 MORE IN STOCK SHIPPING MAY CHANGE IF MORE QUANTITY IS WANTED

Attached are photos of spare parts that were purchased for a Hydrotherm Hydropulse A – 100 boiler unit that was installed around 1990 by my father. He was a distributor for these boilers back then, and he installed one in his newly built home, and stocked up on miscellaneous spare parts to keep this thing running for a long long time. He has since passed away and we are cleaning out the house.

Cutler Hammer Contactor C25DNF340B 3 pole, 40 amp, 208/240 v coil

This is from a recently closed plant. Unit is Deming. There are no tags on it for me to obtain any other information.

B2959000 Goodman/Amana/Janitrol Draft Inducer Motor B2959000S Fasco Part No. 7158-1034. 3000 RPM / 208/230V

TECUMSEH COMPRESSOR LOW TEMP (-40 TO +10) RANGE POINT -10AVA2512ZXN 230/208 60HZ 1 PH R-404a 3HP 12,500 BTUS/HRLINE SIZES:1/2 S DISCH7/8 S SUCT