208 40 for sale, brand-new and used.

All Auctions Start at $3.99 Inventory Number:12140750045 Manufacturer: Description: 2 SANDVIK COR

All Auctions Start at $3.99 Inventory Number:12140750154 Manufacturer: Description: SANDVIK VDI-4

&

Filter Press 24" SPERRY 5 Cu Ft. with Screw Conveyor & Pumps 18 chamber, Type 31 Manufacture : SPERRY Size : 24" / 630mm Serial No. 66697 Type 31 Capacity : 5 Cu Ft Chambers : 18 Screw Auger: 6" with 6" x 6" Discharge

J. Little Mercer Co., Inc. Penfield filtration includes the below items plus controls all on one platform P-2523 2 inch PUMP Model/serial no.

Donaldson Torit Model 64 208/230/460 3 Phase 3/4 HP 3600 RPM Dust Collector Unit is in good condition, it has some light surface rust on the top of the unit. We powered the unit up and it runs well. http://www2.donaldson.com/torit/en-us/installationmanuals/iom%207509401%20cabinet%2050%20to%2080.pdf.pdf This is a freight item.

Aftercooler Heat exchanger Air to air AA-250 Xchanger Inc Tested This is a heat exchanger made by Xchanger Inc, model AA-250. Heat exchanger is used and in fair to good condition with some fading and light corrosion. Two of the fan blades have cracks and should be replaced before installation.

SERFILCO G62092 SCRUBBER PUMP NIB NEW SEVERE CHEMICAL DUTY 7.5HP Description: SEVERE CHEMICAL DUTY; HP: 7.50; HZ: 60; FRAME: 184TCYZ; TYPE: UT; ENCL: TE; NEMA DESIGN: B; RPM: 3490; SF: 1.25; PH: 3; CODE: J; AMB: 40 C; VOLTS: 208-230/460; INSULATION CLASS: F; DUTY: CONT; AMPS: 20.7-18.9/9.4; SHAFT END BRG: 6307-2RSJC3; OPP END BRG: 6205-2RSJC3; SF AMPS: 21.7/10.9; ID# P 08 186953 0001 M 0018; NEMA EFF: 86.5 ORDER# 450156B10; BOOK INCLUDED

Grundfos 3 Hp SS Centrifugal Pump # CRN8-40 U-A-AUUE Mfg by GrundfosModel # CRN8-40 U-A-AUUE Vertical Multistage Centrifugal Pump Size : 2" x 2" 42 GPM 172 Feet 230 psi

Mitts & Merrill vertical wood hog - Hammermill Model #: 13CSD - L.H. S/N: HM623 6-62 40 Hp, 220/440 Volt, 3 ph, 60 Hz, 1180 RPM Frame: 404U, S/N: 173465 40 HP, 230/440 Volt, 3 ph, 60 Hz, 112/56 Amps 14 x 19" throat opening Hytrol 12' Long x 24" wide powered incline belt/feed conveyor 1/3 Hp, 208-230/460 Volt, 3 ph, 60 Hz AMACO Permanent Magnetic separator/collector Model #: 260B-24 S/N: 102773-A SPEC'S SUBJECT TO FINAL INSPECTION

Cleveland SET10 SS Electric Tilting Skillet Braising Pan MFG : Cleveland Model # SET-10 Tilting Skillet / Braising Pan

Unit is all S/S in construction. This unit is driven by a 40 HP drive motor on the cutting head and a 20 HP hydraulic power pack which drives two hydraulic motors, one each on the agitator arm and feed screw. S/N on this unit is 394.

15" x 10' Long Single Filer Bottle Conveyor with Plastic Belt Last used as a Single filer off of an ABC Low Level Depalletizer 15" mattop to 3.25" Single File discharge 10' Long Painted frame construction Side rails included but removed for shipping SS Legs with adjustment 40" Elevation (adjustable) 1/2 HP / 1725 rpm Drive Electrical 208/230/460 Volt / 60 HZ / 3 phase Recently removed from production Exellent Condition !!

42” W x 10' Long SS Conveyor with SS Wire Mesh Food Grade Belt SS Frame construction SS Legs with level adjusters 42" SS Wire Belt 10' Overall length 40" elevation – adjustableSS Drip Pan with drain1 Hp / 1750 rpm drive (Center drive) Electrical 208/230/460 Volt / 60 Hz / 3 PhaseJust Removed from a Major Food PlantVery Good Condition !!

20" Wide x 16' Long SS Conveyor with SS WASH DOWN Motor and Food Belt SS WASH DOWN Motor SS Frame SS legs - Adjsutable 20” wide White Belt - Belt is showing signs of wear 40" elevation Side rails SS WASH DOWN MOTOR 1 HP / 1740 rpm drive Electrical 208/230/460 volt / 60 hz / 3 phaseRemoved from a Food Plant Very Good Condition !!

24" Wide x 7' Long SS Incline Conveyor White Food Grade Plastic Belt, Conveying SS legs 24” wide White Food Grade Plastic Belting 40" infeed elevation 48” discharge elevation UHMW food grade side rails 2 HP / 1725 rpm Electrical 208/230/460 volt / 60 hz / 3 phaseRemoved from a Major Food Plant Excellent Condition !!