225.00 for sale, brand-new and used.

225 AMP CUMMINS POWER COMMAND AUTOMATIC TRANSFER SWITCH DIGITAL DISPLAY NEW SURPLUS -Mfg. 2005 -Model Number: OTPCB-4954868 -Serial Number: A01096620 -Spec: A -Operating Volts: 208/220/240V -1 Phase or 3 Phase -3 Pole -50 or 60 Hertz -Application: Utility to Genset -Digital Controller -Battery Charger (12V or 24V) -NEMA 3R (Outdoor) Enclosure -UL Listed & CSA Approved -Dimensions: 43"H x 31"W x 17"Deep

You are purchasing... Widia 1.216.56.323.00 + 10 pcs. XOMT 070304-34 TN7015 Carbide Inserts Indexable Drills Top Cut Plus™ Drill • 3 x D • D = 23 mm • SNF Shank Data Sheet --> Widia 1.216.56.225.00 Check out the photos!

You are purchasing... Widia 1.216.56.225.00 + 10 pcs. XOMT 09T306-34 TN7015 Carbide Inserts Indexable Drills Top Cut Plus™ Drill • 2 x D • D = 25 mm • SNF Shank Data Sheet --> Widia 1.216.56.225.00 Check out the photos!

Rebuilt Adler 467 Double Needle (3/4”) Walking Foot Auto Thread Trimmer, Backtack and Footlift Rebuilt Durkopp Adler 467 double needle 3/4 ” needle spacing walking foot with large top load bobbin and reverse. Machines also has auto thread trimmer, needle position, footlift and backtack. Complete with large L shaped table top, K-legs and Efka 220V 3 phase motor.

NEW Seiko STH-8BLD NEW Seiko STH-8BLD single needle walking foot with large side load bobbin. Complete with table, stand and servo motor. MADE IN JAPAN Ultimate upholstery machine and best quality.

In these bad economic times, get more “bang”, for your money with tested, working and calibrated test equipment from AAA Equipment Resources INC. I AM A WELL KNOWN SELLER AND BUYER OF ALL WORKING AND CALIBRATED TEST EQUIPMENT. WE OUR ONE OF EBAYS LARGEST INDEPENDENT PROVIDER OF GLOBAL CALIBRATED AND REPAIR TEST EQUIPMENT FOR OVER TWELVE YEARS.

BRAND NEW IN BOX OHMITE RESISTOR 225W 100 OHMS MODEL D225K100 a.imagelink {color:#C9C9C9;} a:hover.imagelink {color:#C9C9C9;} a:visited.imagelink {color:#636363;} a.imagelink img.auctionimage { border: 2px solid #C9C9C9; } a:vis

Ebay Template

Payment | Shipping Payment | Shipping | Packing | Warr

Used in Excellent Working Condition Carrier Bryant ICM ICM281 Furnace Control Circuit Board Module Replaces: Carrier CESO110057-00 Carrier CESO110057-01 Carrier CESO110057-02 &n

Brand new in box. Have 3 cylinders available price is $225.00 EACH! Steel 2.13 In Stroke10 Ton

You are bidding on a nearly new 5 light microstack light tower. This is a Tomar Model 440 Microstack light tower. This was used on a 110Volt circuit.

This is a South Bend Turnado quick change gearbox if you have a need for the gears in the quick change box then here is one off of a South bend Turn nado l7 inch lathe. This lathe was dropped on its face as you can see the box itself is junk but still has some good parts. Thank you for your Business!!

Ametek Lamb Motor 119414-00 2 Stage 5.7" Lamb Ametek 119414-00 motor is 2-stage, 5.7 inch, 110-120 volt. Motor Type: Bypass Discharge: Peripheral Bearings: Double Ball Bearing Sealed Vacuum: 84.3 inches Maximum Air Watts: 274 Maximum Air Flow: 94 CFM Motor Speed: 18,225 RPM .